Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Bedford
Air duct cleaning in Bedford typically costs $425-$780 for a full system, and most jobs are completed in a single 4-6 hour visit. We work in Bedford’s ranch homes and split-levels every week, which means our crews know what a 1970s flex-duct system looks like before they open the first access panel. That knowledge is the difference between a cleaning that holds and one that pulls attic dust back into your registers within a month. Call (806) 606-6902 for a written quote before any work begins.
Why CleanRun Air Duct Cleaning Is Bedford’s Preferred Air Duct Cleaning Company
Bedford’s housing stock was largely built between 1963 and 1985, and that single fact drives everything we do here. Our technicians have opened enough access panels in neighborhoods off Harwood Road, Forest Ridge, and the HEB-area streets west of the airport to expect the same scene: original flex duct, degraded insulation jackets, and boot collars that have pulled loose from decades of thermal cycling in attics that hit 140°F or more every summer. We quote the repair first, then the cleaning, because cleaning a detached duct doesn’t clean anything.
Bedford customers call us because we put the price in writing before the job starts, every time, under Haven Standard Clause 1. That’s not a marketing line. It’s the way CleanRun has operated since Tomas Reyes started the company in 2013, and it’s why homeowners who buy a $500,000 mid-century ranch in Bedford don’t have to wonder what the van ride will add to the invoice. Teams are background-checked, uniformed, and dispatched from the brand’s Dallas-Fort Worth office, rolling into Bedford on a schedule we agree on in advance.
Our Air Duct Cleaning Services in Bedford

Residential Duct Cleaning
Most Bedford homes are single-story or split-level ranchers with ductwork routed through unconditioned attic space. We clean the full supply and return runs, pull and wash registers, and vacuum the main plenum with negative-pressure extraction equipment from Rotobrush and Abatement Technologies. Expect us to find 40 years of North Texas dust, plus a visible layer of pollen from mountain cedar and ragweed seasons that never quite stop in Bedford.

Commercial Duct Cleaning
Bedford has its share of small commercial buildings along Central Drive and the industrial pockets near the airport. We clean office systems, retail plenums, and light industrial return runs with the same documentation we give homeowners: a written scope, a written price, and before-and-after photos of every duct run. Commercial jobs are scheduled around your hours in Bedford, and every job ends with the same 365-Day Done Right Promise.

Supply Duct Cleaning
Supply ducts carry conditioned air from your plenum to the registers. In Bedford’s older homes, these are usually flex duct that has started to sag, kink, or collapse where it passes over rafters or joists. We inspect each run with a camera before cleaning it. If we find a 3-inch debris build-up at the first elbow, you’ll see the photo. Then we’ll quote the resupport or repair separately before touching anything.

Return Duct Cleaning
Return-side leaks are the single biggest cause of recontamination in Bedford homes. When return ducts pull air through cracked mastic joints or loose panned joists, they’re dragging attic dust, insulation fibers, and pollen from nearby open land directly into the system. We seal those leaks as part of the cleaning scope, because running a vacuum through a leaky return is like mopping with the door open. Bedford’s static-pressure systems respond fast to a sealed return; you’ll hear the difference and see it in the filter within weeks.
We also offer Air Duct Cleaning services that include full-system cleaning with HEPA filtration, video inspection of every trunk and branch run, and duct repair and sealing as a standalone scope for Bedford homeowners who want the system right before they clean it. The two jobs go together in this city, and we’ll show you why with a camera before we ask you to spend another dollar.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Bedford
We run professional-grade equipment from brands Bedford homeowners can look up before they even call us: Rotobrush for negative-pressure extraction, Abatement Technologies for HEPA filtration, and Guardsman for access tools and sealing materials. If your system was installed with a Honeywell or Aprilaire air cleaner or filter cabinet, our techs service those units directly during the cleaning visit. No adapters, no improvising, no equipment you wouldn’t find on a commercial job. We carry the consumables needed for Bedford’s typical residential systems, so there’s no “parts run” delay on a job off Pipeline Road or Shady Brook.
Common Air Duct Cleaning Problems We See in Bedford Homes

- Kinked or collapsed flex duct from superheated attics. Bedford roof decks routinely exceed 140°F in July and August. That heat, repeated for 40 summers in a row, breaks down the plastic liner and glue in original flex duct. We open panels and find runs that look like they’re folding in on themselves.
- Loose boot collars at the register connection. Thermal expansion and contraction works staples and zip ties loose over decades. A detached boot collar means the cleaned air skips the register and blows into the attic, while the suction side pulls in dust through the gap.
- Return-side leaks pulling attic dust and pollen. Bedford sits in the crossfire of mountain cedar in January, oak and elm in spring, and ragweed in fall. If your return ducts are leaky, you’re concentrating that allergen load in your bedroom, not just filtering it.
- Cracked mastic on original sheet-metal trunk lines. Many Bedford homes built before 1980 used sheet-metal trunks with mastic-sealed joints. That mastic is now brittle and pulled away, which adds air leakage, condensation at the seams, and a steady path for dust to re-enter cleaned ductwork.
Pricing for Air Duct Cleaning in Bedford, TX
For a typical Bedford single-story ranch with 8-12 duct runs, expect a full system cleaning to run $425-$650, including cleaning of supply and return ducts, the plenum, and all registers. Larger split-levels or homes with long duct runs, second returns, or extensive drainage pans will land in the $650-$780 range. Duct repair or resealing, when discovered during inspection, is quoted separately before work begins; we don’t add it to the invoice after the fact. That’s the whole point of our written-price standard. Call (806) 606-6902 and we’ll give you a number before we touch a single panel.
| Service | Bedford Price Range |
|---|---|
| Full system cleaning (8-12 runs) | $425-$650 |
| Large split-level or extended system | $650-$780 |
| Return duct cleaning (as part of full system) | Included |
| Duct repair or resealing | Quoted separately after camera inspection |
We Also Serve Cities Near Bedford

CleanRun Air Duct Cleaning crews roll out to Bedford and the surrounding Tarrant County cities, including Colleyville, Euless, Hurst, and North Richland Hills. If you’re in the Mid-Cities corridor and have an older duct system you want cleaned properly, Air Duct Cleaning in Bedford is just one corner of our service area. The same written price standard and photo documentation apply everywhere we go.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Bedford

Because by the time a Bedford homeowner books a cleaning, the original flex duct installed during the 1970s or early 1980s has already spent decades in an attic that hits 140°F or higher every summer, which breaks down the insulation jacket and causes the interior liner to sag, kink, or collapse at the elbows. Cleaning a duct that is already collapsed at the boot collar does nothing except move air through a blocked channel. We inspect with a camera first, reseal and resupport the run where needed, then perform negative-pressure cleaning so the work actually holds. Call (806) 606-6902 for a written quote.
Most Bedford homes with original ductwork need a full cleaning every 4 to 6 years, but homes near unpaved roads, open fields, or the grassy easements along the airport perimeter may need it every 3 to 4 years due to the volume of cedar pollen in January and February, oak and elm in spring, and ragweed in fall. If your return-side ducts are leaky, pollen and field dust move through faster. A camera inspection will show you the actual buildup before you commit to a schedule.
Negative pressure air duct cleaning means we use a HEPA-filtered vacuum system to pull air out of the ductwork while we agitate debris, rather than blowing it around with a shop vac. For Bedford’s older ranch homes with loose debris, broken mastic chunks, and collapsed flex sections, negative pressure plus HEPA filtration captures the fine particulates instead of pushing them through gaping joints into your bedroom. It’s the industry standard for systems that are this old and this heavily laden with North Texas dust.
Yes. Before we run cleaning equipment through your system, we send a camera through every accessible duct run and the main plenum, and we show you the footage. This catches kinked flex, detached boot collars, crushed sections from foot traffic in the attic, and cracked mastic joints before we spend your money on a cleaning that wouldn’t do much good. If we find damage, we show it to you, quote the repair separately, and don’t start cleaning until you approve the full scope.
Yes. Sheet-metal trunk lines, common in Bedford homes built before about 1980, are usually rectangular or round metal mains with branch lines attached with takeoff collars. They clean differently than flex duct because the steel is rigid and holds less debris, but the joints and seams often leak badly. We clean the trunk with air-powered agitation, then reseal the leaking joints with the proper mastic or foil tape before we reconnect the branches. If your split-level has a mix of sheet-metal trunks and flex branches, we’ll handle both and show you photos of each before and after. Call (806) 606-6902 for a written price on your Bedford home.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Bedford since the company was founded in 2013.




Before
After
Before
After