Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Clearwater
Air duct cleaning in Clearwater typically costs between $395 and $1,100 for a full single-family home, depending on the home’s size, the number of duct runs, and how much the salt air has degraded the system. Most jobs are completed in four to eight hours, and you’ll leave with a camera-recorded file showing the inside of every run before and after we touched it. If you’re dealing with decades-old fiberglass-lined duct in a 1960s ranch off Gulf-to-Bay Boulevard or a snowbird condo near Clearwater Beach, call (806) 606-6902 and we’ll put a written price in front of you before a single panel comes off.
We know Clearwater’s homes because we work in them every week. The humidity off the Gulf and Tampa Bay does things to ductwork that inland crews don’t see. Pinellas County’s housing stock peaked between the 1950s and 1980s, which means most of what we open up is original or early-replacement flex duct running through attics that hit 140°F by June. That combination produces a specific kind of damage profile: salt-corroded metal fittings, condensation-soaked fiberglass liners, and mold that has been quietly cycling through the AC for years. This is the work our Air Duct Cleaning team does every day for homeowners across Clearwater.
Why Clearwater Homeowners Choose CleanRun
Tomas Reyes founded CleanRun in 2013 with a simple rule: the customer sees what we see, before they pay for what we say. We’ve held to it for over 52,000 homes. In Clearwater, that means when our tech pulls a borescope out of a return plenum on a 1978 split-level near Countryside, you watch the footage. You don’t take our word for it. That’s Haven Standard Clause 1: written price before work starts. And it’s backed by the 365-Day Done Right Promise in writing, on every job.
Clearwater homeowners tend to be sharp researchers. They bought at a high price point, they know what a deteriorated flex duct looks like, and they’re tired of companies that sell a $79 coupon and then “discover” problems once the vacuum is running. We don’t do that. Our techs are background-checked, uniformed, and identified by name before they walk in. The equipment is professional-grade: Rotobrush and Abatement Technologies for source removal, Nikro for coil cleaning in the air handler, Guardsman for sanitizing. You can look any of those up before we arrive.
We also understand the rhythm of this city. Clearwater’s snowbird population leaves thousands of homes running in vacancy mode from May through October. Owners come back in November and fire up a system that has been circulating mold-spore-laden air through stale ductwork all summer. October and November are our busiest months in Clearwater for a reason. When you call (806) 606-6902, the person who answers knows what you’re dealing with.
What We Actually Find in Clearwater Ducts
Before anyone quotes you a cleaning price, someone should put a camera in your ducts. Clearwater’s dual-water exposure is the whole story. The Gulf sits to the west, Tampa Bay to the east, and the air between them carries salt and moisture that most Florida markets don’t get in the same concentration. That salt settles on metal duct fittings in your attic and corrodes them faster than in Tampa or St. Petersburg. The moisture condenses on the inside of attic-mounted duct, soaking into fiberglass liners and creating conditions where mold colonizes year-round.
Here’s a job we did recently, the kind that repeats up and down US-19 every week. In a mid-century ranch off Gulf-to-Bay Boulevard, our tech found original 1970s flex duct crushed in three places and a return run half-detached at the air handler. After a camera inspection confirmed condensation-fed mold in the fiberglass liner, we performed source removal with agitation tools and HEPA-filtered negative pressure, then sealed every connection. The homeowner said airflow felt new for the first time in decades. That’s the point of a Clearwater duct cleaning done right: the fix addresses what the camera found, not what a generic checklist assumes.
Three failure modes dominate Clearwater homes:
- Salt corrosion on metal fittings. The same sea air that rusts your patio furniture works on galvanized duct collars and air handler cabinets. Once a fitting perforates, 140°F attic air gets pulled into the conditioned stream, starving distant bedrooms of airflow. A cleaning alone won’t fix that; the fitting has to be sealed or replaced.
- Vacancy-mode mold circulation. Snowbird homes left at 82°F all summer don’t stop running; they run at reduced airflow while pulling humid attic air through aging duct. Mold blooms in the fiberglass liner, and when the owner returns and drops the thermostat to 72°F, every spore gets pushed through every register.
- Crushed and disconnected flex duct. Pinellas County’s slab-on-grade homes route duct through tight attic spaces. Between original installation shortcuts, roof work, pest activity, and 40 years of Florida heat cycling, flex runs get kinked, crushed under stored boxes, or pulled loose at the plenum. We find at least one compromised run in roughly a third of the older Clearwater homes we inspect.
BeforeAfterOur Air Duct Cleaning Services in Clearwater
Full System Cleaning
This is the service most Clearwater homeowners actually need. We clean every supply run, every return run, the plenums, and the air handler interior as a single scope of work. In Clearwater’s older homes, skipping the air handler is the most common mistake we see competitors make. If the blower wheel and evaporator coil are caked with the same mold and salt dust, cleaning only the ducts buys you about three months before it all comes back. A full system clean in a typical 1,800-square-foot Clearwater ranch runs $550 to $900.
Video Inspection
Before we quote, we show. Our video inspection feeds a borescope camera through each accessible duct run and records what it finds: crush points, disconnects, mold patches, salt corrosion. You watch the footage live if you want. Every Clearwater inspection includes a written findings summary, so you’re not making a $700 decision on a tech’s verbal reassurances. The inspection is included with any full system cleaning at no separate charge.
Residential Duct Cleaning
Clearwater’s residential stock is dominated by slab-on-grade homes from the 1950s through the 1980s, plus condo conversions along the beach and mid-rise buildings in the Gateway area. Each type has different access constraints. Ranch homes off Belcher Road and McMullen Booth Road usually have attic-mounted systems with accessible trunk lines. Condos on Island Estates and Sand Key often route duct through tight soffits that require specialized camera work and flexible agitation tools. We handle both. A condo unit typically runs $395 to $650; single-family homes run $550 to $1,100.
Commercial Duct Cleaning
Clearwater’s commercial tenants, from medical offices near Morton Plant Hospital to restaurants on Cleveland Street, face the same salt-air corrosion but with larger systems and stricter indoor air quality expectations. We work after hours or on weekends to avoid disrupting business hours, and every commercial job ends with the same documented photo record we provide residential customers. Commercial pricing is scoped per building and system, with a written quote delivered before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Key Takeaways for Clearwater Homeowners
- Full system cleaning in Clearwater runs $395 to $1,100 depending on home size and duct condition; condos sit at the lower end, larger single-family homes at the upper end.
- Salt air from the Gulf and Tampa Bay corrodes metal duct fittings faster here than in inland Florida, which means cleaning alone often needs to be paired with targeted sealing.
- Snowbird homes left in vacancy mode all summer frequently circulate mold through the ducts; the October-November surge in calls is a Clearwater pattern, not a coincidence.
- You should never pay for duct cleaning you can’t verify. We put a camera in every run and hand you the footage before and after.
- Every job gets a written price before work starts. If a competitor quoted you lower, bring it and we’ll put our number next to it in writing, free.
Pricing for Air Duct Cleaning in Clearwater, FL
| Service | Clearwater Price Range |
|---|---|
| Condo / small unit (under 1,000 sq ft) | $395 - $550 |
| Single-family home, 1,000-2,000 sq ft | $550 - $800 |
| Single-family home, 2,000-3,500 sq ft | $800 - $1,100 |
| Full system clean (ducts + air handler) | $650 - $1,400 |
| Video inspection only (credited toward cleaning) | $95 - $175 |
| Duct sealing (per connection, as needed) | $18 - $35 |
Prices reflect what we see in Clearwater specifically. The high-humidity, high-salt environment means we’re more often than not quoting some level of sealing or fitting repair alongside the cleaning. That’s why our written quote is one flat price per system, not a per-vent figure that inflates as the tech “finds things.” Haven Standard Clause 1 applies: the number on the quote is the number on the invoice. If you bring a competitor’s estimate, we’ll put our price next to it in writing, free, and you can decide with both documents in front of you. Call (806) 606-6902 for an exact quote on your Clearwater home.
Common Air Duct Cleaning Problems We See in Clearwater Homes
- Fiberglass-lined duct from the 1960s and 1970s. A large share of Clearwater’s housing stock was built when fiberglass duct liner was standard. That liner traps fine dust, absorbs condensation, and provides a growth surface for mold. Owners often mistake a “clean smell” for clean ducts, but the camera shows decades of accumulation.
- Salt-corroded metal duct fittings. In attics along the causeways and barrier islands, galvanized collars and plenum connections rust out faster than almost anywhere else in Florida. The corrosion lets hot attic air into the system and starves back bedrooms of airflow.
- Crushed flex duct under stored items. Clearwater attics double as storage in many slab-on-grade homes. Boxes, holiday decorations, and old furniture compress flex duct and restrict airflow to specific rooms. A camera inspection locates these crush points before they get quoted.
- Disconnected return runs at the air handler. Original installation tape degrades in 140°F attic heat, and return ducts can pull loose over time. When that happens, the system sucks unconditioned attic air directly into your home and blows it through every register.
Trusted Brands We Service in Clearwater
We run professional-grade equipment from manufacturers you can verify independently. For Clearwater jobs specifically, our crews rely on Rotobrush for source-removal agitation, Abatement Technologies for HEPA-filtered negative-pressure extraction, and Guardsman for antimicrobial sanitizing after mold-contaminated runs are cleaned. If your system in Clearwater was installed with an Aprilaire filter cabinet or a Honeywell media filter, our techs service those housings as part of the job. We stock replacement filters and common duct fittings on the truck, which means fewer return trips when we find a crushed elbow off Belleair Road or a corroded collar near downtown. The tools are not a sales prop; they’re the reason we can show you what came out of your ducts and prove the work was done.
We Also Serve Cities Near Clearwater
Our crews cover Clearwater and the surrounding Pinellas County communities daily. We work in Largo, Dunedin, Pinellas Park, and Palm Harbor with the same written pricing and photo-record standard applied across the whole service area. If you’re in one of these nearby cities, the same camera goes in your duct before any price goes on paper. Call (806) 606-6902 and we’ll schedule based on the route that week.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Clearwater
Clearwater sits between two large bodies of salt water, the Gulf of Mexico to the west and Tampa Bay to the east, and the prevailing wind pulls moisture from both directions across the peninsula. That means the air moving through your attic carries more salt aerosol than in Tampa, which sits further from the Gulf on one side and faces a more sheltered bay on the other. Salt accelerates galvanic corrosion on galvanized steel duct fittings, air handler cabinets, and coil drain pans. In practice, we see Clearwater metal duct components fail five to ten years earlier than identical components in inland Pinellas or Hillsborough. If rust is visible on registers or the air handler, a cleaning should include a fitting inspection so you’re not paying to clean ducts that are actively pulling in attic air. Call (806) 606-6902 and we’ll put a camera on it.
Almost certainly yes, and you should check the ducts before you run the system hard. When a Clearwater home sits in vacancy mode for five or six months, the AC still cycles, but at a higher setpoint and with lower airflow, which lets humidity accumulate inside the duct liner. Mold spores that were already present find a damp, dark environment and multiply. When you return in November and drop the thermostat, the blower pushes all of that concentrated spore load into the living space. A documented photo inspection before you run the system at full demand is the most reliable way to know what you’re dealing with. Many Clearwater snowbirds book this inspection in October before they arrive, so the work is done and the photo record is waiting. Call (806) 606-6902 to schedule a pre-return inspection at no charge when bundled with a full system cleaning.
You know because we show you. Our camera inspection records the inside of every accessible duct run before cleaning and after cleaning, and the footage is delivered to you as part of the standard job record. The before footage on a Clearwater house from this era typically shows a gray or black coating on the fiberglass liner, sometimes with visible mold spotting where condensation has pooled near the plenum. The after footage shows the liner surface restored to its original texture. If a tech won’t put a camera in your ducts, you have no way to verify the work was done, and the $79 coupon probably means exactly that. Our Documented Photo Record is standard on every CleanRun job, not an add-on. That’s the entire point.
Because Clearwater’s winter nights still hold relative humidity above 80% most weeks, and overnight temperatures can dip into the 50s while your attic stays warmer from the house below and the sun on the roof. When cold air moves through a duct that’s sitting in a warmer, humid attic, moisture condenses on the duct’s exterior and, if the duct liner is permeable or old, inside it. That’s why condensation-fed mold in fiberglass-lined ducts is a year-round Clearwater problem, not a summer-only one. The fix is often a combination of duct replacement or sealing at high-humidity points, plus cleaning to remove what has already grown. We’ll show you the condensation points on camera before we write any scope of work.
There is no point, and that’s exactly why we scope duct cleaning as a full system job in Clearwater. The air handler contains the blower wheel, the evaporator coil, and the condensate pan; in Clearwater’s salt-and-humidity environment, those components can be as contaminated as the duct liner itself. If you clean the ducts but leave the air handler fouled, the blower pushes residual mold and dust back into your freshly cleaned ductwork within weeks. A full system cleaning includes source removal from the air handler interior, coil cleaning where accessible, and drain pan treatment. For a 1,800-square-foot Clearwater home, full system work runs $650 to $1,100 versus $550 to $800 for ducts only. The $100 to $300 difference is the difference between a documented fix and an expensive short-term cosmetic job. Call (806) 606-6902 and we’ll write the full scope with prices for both options so you can decide based on facts.
Get a Written Price for Clearwater Duct Cleaning
You don’t have to take anyone’s word about what’s inside your ducts. We’ll put a camera in them and hand you the footage. We’ll write a price before anything comes off the wall, and we’ll back the whole job with the 365-Day Done Right Promise in writing. If another company has already quoted you, bring it. We’ll put our number next to it, free. Call (806) 606-6902 to talk to a live person today.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Clearwater since the company’s founding in 2013.
Air Duct Cleaning in Nearby Areas
