Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Frisco
Air duct cleaning in Frisco runs $450-$850 for a typical 3,000-4,000 sq ft home, with full-system video inspection included on every job. The price depends on how many years of compaction have built up in the runs and how many zones the house has. We schedule Frisco jobs within a few business days and every job ends with a documented photo record of the inside of your ductwork. Call (806) 606-6902 for a written quote before any work starts.
What makes Frisco different from almost anywhere else in Texas is simple: the city barely existed a generation ago. Most of the homes here were built between 2000 and 2022, and most have never had their air duct cleaning done once. That is not a guess. It is what our camera keeps showing us, street after street, subdivision after subdivision.
Why CleanRun Air Duct Cleaning Is Frisco’s Preferred Air Duct Cleaning Company
We have pulled video inspection cameras through enough Frisco duct systems to know what your subdivision’s builder probably left behind. In Stonebriar, it is drywall dust compacted into the flex runs. In newer sections near Panther Creek, it is spray-foam overspray and blown-in insulation particles stuck at the wye fittings. In homes along Eldorado Parkway built in the late 2000s, we routinely find undersized return chases that never pulled enough air to clear the original construction debris in the first place.
That is the value of a crew that works Frisco weekly. We already know what the homes in your development look like inside the ductwork because we have photographed the same floor plans, the same subcontractor workmanship, and the same debris signatures in neighboring houses. You get a documented record, not a vague promise.
CleanRun was founded in 2013 by Tomas Reyes. Since then we have served 52,000+ homes, every single one quoted with a written price before a panel came off and every single one delivered with a photo record of the work. For Frisco specifically, that record matters more than usual. A 15-year-old home here is often dirtier inside the ducts than a 40-year-old home in a slower-growing market.
Our Air Duct Cleaning Services in Frisco
Residential Duct Cleaning
This is source removal, not a shop-vac pass. We run negative-pressure extraction with HEPA filtration through every supply and return run, then agitate the duct walls to break the compacted layer loose. In Frisco’s 3,000-5,000 sq ft two-story homes that means a full workday, sometimes more if the system has multiple zones and long flex runs. Most homes we clean here get a full system cleaning on the first visit because they have never had one before.
Commercial Duct Cleaning
Frisco’s commercial build-out followed the same arc as its housing: fast, large, and rarely cleaned after handover. We service offices, retail suites, and light industrial spaces across Frisco, including properties near The Star and the retail corridors along Preston Road. Commercial systems often have the same construction-debris base layer as nearby homes, compounded by years of tenant turnover and missed maintenance windows. We document every run before and after, so property managers have a record for their files.
Supply Duct Cleaning
Supply ducts are where the debris lives. In Frisco homes with long flex runs stretched across 3,000+ sq ft, the supply side carries the construction dust, the blown-in insulation fragments, and the compaction that forms from years of HVAC runtime. We clean these runs with agitation tools sized to the duct diameter, then verify with video inspection before we call the run finished. If a run was undersized or sagging, we note it in the photo record.
Return Duct Cleaning
The return side is where Frisco’s pollen corridor shows up. Mountain cedar in winter, oak in spring, ragweed in fall, plus whatever is blowing off active construction sites nearby. Return intakes pull all of it into the duct system. We clean the full return path from the register to the plenum, which is where the heaviest accumulation tends to sit in homes here. If the return chase is undersized, like we see across many 2000s-era Frisco builds, we flag it on the video record.
Full System Cleaning
For homes that have never been cleaned, which is the norm in Frisco, this is the service we recommend. It covers the supply runs, return runs, the plenum, the blower housing, and the register boxes. We run negative pressure on the whole system, agitate every run, and deliver a video inspection record showing the before and after. A 4,000 sq ft two-story in Frisco typically takes a full day. It costs more than an air-wash, but it is the only approach that actually removes what the builder left behind.
Video Inspection
This is the single most important service for a Frisco homeowner, and every job includes it. Before we touch anything, we run a camera through the supply and return ducts and record what is actually there. You see the debris. Then, after the cleaning, we run the camera again and show you the same runs. The video record is part of your written job file, stored with the photo documentation. No other standard gives you that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Frisco
Our equipment roster includes Rotobrush, Nikro, and Abatement Technologies. These are professional-grade, trade-recognized systems built for source removal, not reskinned shop-vacuums. Frisco’s long flex runs and multi-zone layouts need agitation tools that can reach 25-35 feet into a run and break up compacted debris without damaging the duct walls. That is what these machines do. We also stock replacement flex duct, register boxes, and sealing materials, so a run that is beyond cleaning can be repaired the same day instead of becoming a second visit.
Common Air Duct Cleaning Problems We See in Frisco Homes
- Builder tape left in place, not a clean handover. Builders tape registers during drywall work but rarely source-remove debris before closing. The dust stays behind the tape and compacts over years. By the time we arrive, it is a source removal job, not a light cleaning.
- Undersized return chases from the rapid build-out. Many 2000s-2010s Frisco homes were framed and ducted quickly. The return side pulls weak, so the debris never clears naturally. A standard negative-pressure clean without proper agitation will not get it out either.
- The subdivision debris signature. Entire Frisco developments were built by the same subcontractors within 12-18 month windows. Homes in the same neighborhood nearly always have the same debris composition. A trained technician who works the area knows what to look for before the camera even goes in.
- Pollen and construction particulate compounding. Frisco sits in a high-pollen corridor and still has active construction across the city. Return intakes pull fine particulate into the ducts of finished homes nearby. This adds a fresh layer of contamination on top of the original construction debris.
Pricing for Air Duct Cleaning in Frisco, TX
A whole-system air duct cleaning for a typical Frisco home runs $450-$850. A 3,000 sq ft single-zone system starts near the bottom of that range. A 4,500-5,000 sq ft two-story with multiple zones, heavily compacted debris, and undersized returns lands at the top. Commercial jobs are quoted per system after a walkthrough.
What affects the final number: how many years of compaction have accumulated, how many runs and zones the system has, and whether any sections need repair or replacement. We publish our equipment brands and our written pricing policy. Under Haven Standard Clause 1, the written price is delivered before any work starts. No per-vent pricing. No bait coupon that changes when the tech arrives. One flat price per system, in writing, before a panel comes off.
We also offer a Free Second Opinion on any written estimate. Bring us a competitor’s quote and we will put our own number next to it, in writing, at no charge.
We Also Serve Cities Near Frisco
CleanRun serves Frisco and the surrounding North Dallas corridor, including Little Elm, The Colony, Denton, and Lewisville. If you are just outside the city line, call (806) 606-6902 and we will confirm coverage. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and crews work Frisco neighborhoods every week.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Frisco
A new Frisco home often needs cleaning sooner because builders taped the registers during drywall work but never removed the construction debris before handover. That leaves a base layer of drywall dust, spray-foam overspray, and insulation particles in the ducts from day one. After 10-15 years of continuous HVAC runtime and pollen intake, that base layer compacts into a hardened coating that a basic air-wash cannot remove. Call (806) 606-6902 for a video inspection and a written quote.
Yes. We consistently find an identical debris signature across homes in the same Frisco subdivision because the same subcontractors framed and ducted the entire development within a 12-18 month window. If we cleaned a neighbor’s system and found a compressed layer of drywall dust and blown-in insulation at every wye, your ducts are likely carrying the same load. The photo record from your street tells us what to expect before we even arrive.
Frisco’s HVAC systems run nearly continuously from late April through early October, which means far more annual runtime than most U.S. markets. More runtime means more air pulled through the system, which means faster debris accumulation on the duct walls. Combine that with the pollen corridor and the construction particulate, and Frisco homes simply accumulate more material per year than homes in cooler or less active markets. A 15-year-old system here often looks like a 30-year-old system elsewhere.
In a 15-year-old Frisco home that has never been cleaned, we expect a compressed base layer of drywall dust and spray-foam overspray from the original build, plus years of HVAC lint, pollen, and construction particulate layered on top. We frequently find blown-in insulation fragments lodged at the wye fittings where the flex runs split. The longer it sits, the more the material compacts and the harder it is to remove. A full system cleaning with agitation and negative pressure gets it out. Call (806) 606-6902 for a quote.
Yes. We run negative-pressure extraction with HEPA filtration throughout the job, which means the system pulls airborne particulate into the filtration unit rather than blowing it back into your living space. Floors are protected, registers are sealed during the process, and the house is left as we found it. The photo record at the end shows you the inside of the ducts and the condition of the work area.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Frisco since 2013.