Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Norwood
Air duct cleaning in Norwood, MA typically runs between $400 and $900 for a full single-family system, with smaller ranch or Cape homes on the lower end and larger colonials with multiple returns on the higher end. If your home was built before 1975 and still has its original galvanized ductwork, you should expect additional time for degreasing, which adds roughly $150 to $300 depending on the length of the trunk line. Most Norwood jobs are completed in a single visit of three to six hours. Call (806) 606-6902 for a written price before any work begins.
We work throughout Norwood, from the post-war neighborhoods south of Route 1 to the older streets near Washington Street, and we schedule based on your system, not a clock on the wall. Every job ends with a documented photo record of each duct run, before and after. That’s a CleanRun standard, not an upsell.
Why CleanRun Air Duct Cleaning Is Norwood’s Preferred Air Duct Cleaning Company
Norwood’s housing stock is not like Canton’s or Westwood’s. The town’s primary build-out happened between 1950 and 1975, which means a large share of homes here were designed around oil-fired forced-air furnaces, not the cleaner-burning natural gas systems most of them run today. That history matters during a duct cleaning because the conversion leaves a residue most companies are not set up to remove. We are.
Our Norwood customers consistently tell us the same thing: they had no idea what was inside their ducts until we put the camera in. That’s the whole point. We do not ask you to take our word for anything. We photograph the inside of every run before and after, and we hand you that record before we leave. If a section is still dirty, you will see it on the screen, and we will keep working until it is not.
Every CleanRun technician working in Norwood is background-checked, uniformed, and identified by name before arrival. Tomas Reyes, who leads our crews, has been with us since the early years and knows the quirks of mid-century Norwood ductwork better than most people know their own basements. Our license number is published on every quote and every job record, not hidden in a website footer.
Our Air Duct Cleaning Services in Norwood
Most Norwood homes need more than a basic vacuum pass. The systems we see fall into predictable patterns based on when the house was built and how it was converted. Here is what we actually do in this town, service by service. We are the Air Duct Cleaning team that documents everything.
Residential Duct Cleaning
Residential work is the core of what we do in Norwood, and it starts with a walkthrough. We measure each run, note the register count, check access points, and then put a camera into the plenum before anything else happens. In Norwood, that camera shot usually shows one of two things: ordinary dust accumulation in newer or well-maintained systems, or the dark, sometimes sticky film left behind by decades of oil combustion in homes converted to gas. The cleaning process differs sharply between those two.
A typical single-family ranch off Neponset Street or a Cape near Winslow Avenue runs $450 to $650 for a standard negative-pressure extraction. If we find the oil-soot residue, we will tell you before we change anything, and the written price reflects the extra degreasing step, not a surprise added at the end.
Commercial Duct Cleaning
Norwood’s commercial spaces cluster along Route 1 and the industrial streets east of the train tracks, and many of them operate in buildings that were never designed for today’s occupant density. That means return air systems working harder than intended, pulling more particulate load than the filters were ever sized for. We clean commercial supply and return runs to the same documentation standard we use in homes: photos of every accessible section, before and after.
For retail and office spaces in Norwood, we schedule around your hours and provide a written scope before work begins, including the number of runs, the length of trunk line, and the equipment we will use. Pricing for small commercial systems in Norwood starts around $750 and scales with square footage and duct complexity. No per-vent pricing, ever.
Supply Duct Cleaning
Supply ducts carry conditioned air from your furnace out to the registers. In Norwood, where the heating season runs October through April, those supply runs move air for six-plus months straight. When the furnace shuts down in spring, condensation can form inside un-insulated metal ducts in damp basements, which is common in low-lying areas of Norwood near the Neponset. That moisture mixes with whatever is already coating the duct walls.
Cleaning supply runs alone is sometimes the right first step for a homeowner who is seeing dust on freshly cleaned surfaces shortly after a full system cleaning elsewhere. We do not recommend partial cleanings as a permanent solution, but if a budget is tight, cleaning supply runs in Norwood runs $250 to $400 depending on the home. We will tell you plainly if it is worth doing half the system or if you should wait and do it right.
Return Duct Cleaning
Return ducts are the lungs of a forced-air system. They pull air from your living spaces back to the furnace, and in Norwood they are often the dirtiest part of the system. Why? Because return ducts in mid-century homes were sometimes framed with building cavities and patched with flex-duct through finished walls, especially in older houses near Washington Street where forced air was retrofitted long after the home was built.
Those patch jobs leave gaps. Gaps pull basement air, which in Norwood means mold spores and damp particulate from seasonally high groundwater. We clean return runs with the same negative-pressure extraction and camera documentation, and we flag any gaps or disconnects we find. Return duct cleaning in Norwood typically runs $200 to $350 when done alongside supply cleaning.
Full System Cleaning
This is the service most Norwood homeowners ultimately need. A full system cleaning covers every supply and return run, the plenum, the trunk line, the air handler, and the blower motor. The blower motor part is not optional here. After an oil-to-gas conversion, the blower wheel is often caked with the same oily soot we find in the ducts, and if you clean the ducts but skip the blower, the first heating cycle re-deposits contamination throughout the system. We include it, and we photograph it.
Full system cleaning for a typical 1,400 to 2,200 square foot Norwood home runs $500 to $850. Homes with original 1950s-60s galvanized ducts and conversion residue should expect to be on the higher end. The de-greasing adds labor and time, and there is no honest way around that. The job is not done until the camera shows clean metal.
Video Inspection
We perform a video inspection on every single Norwood job, included as standard. No extra line item. The camera goes into the plenum first, then through the trunk line and each major branch. You see what we see, live or on the recorded stills afterward. If you think a previous cleaning did nothing, our inspection will likely show you why. On a ranch off Dean Street, we documented the original 1962 galvanized supply and return ducts still in place after an oil-to-gas conversion. The plenum and first six feet of trunk line were coated in a baked-on oil-soot film that a Rotobrush with standard agitation tools could not dislodge. We applied a dedicated degreasing wash under negative pressure, then HEPA-vacuumed the full system. The homeowner’s persistent musty odor cleared within 48 hours. That is a Norwood-specific job, and it is not rare here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Norwood
We run Rotobrush and Nikro agitation and extraction systems, with Abatement Technologies HEPA filtration on every job. These are professional-grade tools, the same brands used in commercial and institutional settings, and you are welcome to look them up before agreeing to a price. Around Norwood, we keep a stock of common replacement registers, filter frames, and flex-duct connectors on the truck, so small hardware issues get fixed during the visit rather than scheduled for a follow-up. It saves you a second appointment and keeps the job moving on the same day.
Common Air Duct Cleaning Problems We See in Norwood Homes
- Oil-to-gas conversion residue: The single most common issue in Norwood. When a home that burned oil for decades converts to natural gas, the change is cleaner going forward, but the original ductwork still carries the baked-on soot from the oil era. A standard brush pass will not remove it. It requires a degreasing step. Most homeowners don’t know this until the camera shows it.
- Damp basement air pulling into returns: Low-lying areas of Norwood, particularly near the Neponset River watershed, have seasonally high groundwater. That moisture enters un-insulated metal ducts in the basement and accelerates mold growth inside the runs. Cleaning the ducts is only half the fix; we also identify the gaps where basement air is entering.
- Original 1950s-60s galvanized sheet metal: A huge share of Norwood’s post-war Capes and ranches still have their original ducts. Sheet metal from that era was thinner than modern gauge, and seams have often pulled apart over 60 years of thermal cycling. Those gaps mean the system pulls dust from wall cavities and floor joists, loading the ducts faster than a tight modern system.
- Wood heat and unpaved-road dust: Norwood has pockets of homes on unpaved lanes and a surprising number of wood stoves and inserts. Wood smoke carries fine ash that coats duct interiors, and unpaved-road dust settles into every horizontal surface. Homes with both factors need cleaning more frequently than a boilerplate schedule would suggest.
Pricing for Air Duct Cleaning in Norwood, MA
Written, upfront pricing is Haven Standard Clause 1. We do not quote over the phone and then change the number when the van arrives. We give you a written price before a single panel comes off, and that price is the price. In Norwood, a standard residential full-system cleaning runs $400 to $900, with most 1,200 to 2,000 square foot homes landing between $500 and $700. Supply-only cleaning runs $250 to $400. Return-only runs $200 to $350. The degreasing step for oil-to-gas conversion residue adds $150 to $300 depending on trunk-line length and severity. Commercial work starts around $750. A free second opinion on any written estimate is available; bring a competitor’s number and we will put ours next to it in writing.
We Also Serve Cities Near Norwood
While this page is built for homeowners in Norwood, our crews also cover the surrounding towns. We regularly work in Canton, Dedham, Stoughton, and Needham, where the housing stock and ductwork conditions differ enough that we adjust our process accordingly. If you are in one of those towns, the same written-price standard and photo documentation apply, no exceptions.
Serving Norwood, MA - Our Local Coverage Area
We’re based in the Norwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Norwood
Because the oil combustion process left a baked-on soot film inside your ductwork that natural gas did not remove. The conversion changed your heat source, not your ducts. That film is oily, fine, and chemically different from ordinary household dust. It holds odor and re-circulates particles whenever the blower runs. Removing it requires a degreasing wash applied under negative pressure, followed by HEPA extraction. Standard brush agitation alone will not dislodge it, which is why the smell returns after some cleanings. Call (806) 606-6902 and ask specifically about our conversion-residue cleaning process; we will explain what your system needs and write a price for it.
Every two to three years, rather than the conventional three to five. Unpaved-road dust is finer than household dust and settles into horizontal duct runs quickly. Wood smoke adds an ash component that coats the inside of the trunk line. Together, those two factors can load a Norwood system twice as fast as one in a paved, gas-heated subdivision in Dedham or Milton. We will tell you honestly after an inspection whether your system needs it sooner or can wait; the camera does not lie.
Yes, in most cases. Original galvanized ducts from the 1950s through 1970s are thinner than modern sheet metal, so aggressive mechanical agitation can risk seam separation. We adjust tool pressure accordingly. And if your home converted from oil to gas, you almost certainly need the degreasing step, because the oil-era film is still there. A standard cleaning that skips degreasing leaves the contamination in place and you will notice the odor and dust within weeks. Our process for these older Norwood systems is slower and more careful, and the written price accounts for that time honestly.
Yes, and it is one of the most under-discussed issues in Norwood. The town sits within the Neponset River watershed, and many low-lying properties have seasonally high groundwater. Damp basements mean moisture wicks into un-insulated metal ducts and any organic debris inside becomes a growth medium for mold. If you clean the ducts but ignore the moisture source and any return-air gaps pulling basement air, the problem returns. During a full system cleaning we photograph those gaps and flag them. For a durable result in a damp Norwood basement, addressing the air entry points matters as much as the cleaning itself.
Yes, every time. The blower wheel is often the dirtiest single component in the system after an oil-to-gas conversion. If the blower is coated in the same oily soot as the ducts, cleaning the runs alone means the first heating cycle re-contaminates everything. We remove the blower assembly, clean it, photograph it before and after, and reinstall it. This is included in our full system price for Norwood homes; it is not an add-on. If you are comparing quotes, ask each company directly whether the blower is included. You should get a straight answer. Call (806) 606-6902 for ours.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Norwood and surrounding communities. Founded 2013, with 52,000+ homes served and a documented photo record on every job.