Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Tacoma
Air duct cleaning in Tacoma typically costs $450-$850 for a full residential system, and the work usually takes 4 to 7 hours. Our crews serve every Tacoma neighborhood, from the North End to South Tacoma, with written pricing before work starts and a photo record of every duct run when we leave. If you’re seeing dust settle back on furniture within days of wiping it, or your registers are pumping out air that smells stale, call us at (806) 606-6902 for a straight answer and a written scope of work.
Why CleanRun Air Duct Cleaning Is Tacoma’s Preferred Air Duct Cleaning Company
Tacoma homeowners are not shy about asking questions, and we respect that. Since 2013, CleanRun has built its reputation here by showing proof rather than asking for trust. Every job in Tacoma, whether it’s a 1915 craftsman in the North End or a 1970s rambler off Pacific Avenue, ends with a documented photo record showing the inside of your ducts before and after. You see the debris. You see the clean metal. You don’t take our word for it.
Tomas Reyes, who leads our Tacoma crews, knows what decades of ASARCO-era dust and a marine climate do to ductwork. He’s opened plenums in Stadium District foursquares and found rust scale, mortar dust, and disconnected runs that no filter ever touched. Our Tacoma customers come back because we name the problem in plain English, write the price down, and then prove the fix with a camera. That’s the H.A.V.E.N. Standard at work, Clause 1: a written price before any panel comes off. No exceptions, ever.
Our Air Duct Cleaning Services in Tacoma

Residential Duct Cleaning
Most Tacoma homes we clean are pre-WWII craftsman bungalows or mid-century tract houses, and each type has its own failures. A full residential cleaning here includes negative-pressure extraction, agitation of every accessible run, and a camera pass so you can see what came out. In Tacoma’s older stock, that often means pulling decades of dust that settled during the years the ASARCO smelter was still running.

Commercial Duct Cleaning
Tacoma’s commercial buildings along South Tacoma Way, in the Dome District, and near the Port carry heavy tenant turnover and constant dock dust. We clean office systems, retail spaces, and medical suites, working around business hours where needed. Every commercial job here gets the same written scope and photo documentation, because building owners verify work too.

Supply Duct Cleaning
Supply ducts push conditioned air into your rooms, and in Tacoma they’re often the dirtiest part of the system when returns have been neglected. We clean supply runs branch by branch, not just the trunk. If your home still has its original gravity-furnace trunk converted to forced air, we’ll flag the transition points where dust collects and airflow drops.

Return Duct Cleaning
Return ducts pull air back to the furnace, and in Tacoma’s older homes they’re frequently undersized and coated with a packed dust layer that resists a simple vacuum pass. When we clean returns, we check for crawl-space air being drawn in through unsealed joints, which is a major recontamination source in this city’s humidity.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Tacoma
Our Tacoma crews work with professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies. For filtration and air quality work, we’ll discuss Aprilaire and Honeywell options suited to your system’s actual CFM, not whatever’s on the truck. If your Tacoma home has an older Aprilaire media cabinet that’s never been opened, we can inspect it during the cleaning and tell you honestly whether it’s doing anything. We don’t stock shelf filler. We stock what this city’s ductwork actually needs.
Common Air Duct Cleaning Problems We See in Tacoma Homes

- ASARCO-era dust in original ductwork. Homes occupied before 1985, especially in the North End, West End, and near Ruston Way, often have fine, heavy dust that settled inside ducts during the smelter’s operating years. It’s not the same as ordinary household dust, and it tends to sit deep in older galvanized trunks.
- Mismatched forced-air conversions. A 1950s or 1960s conversion that grafted flex duct onto a 14-inch gravity trunk leaves step-downs, sharp bends, and dead-end pockets. Debris collects at those connections, and in Tacoma’s humidity, rust forms quickly inside the galvanized metal.
- Crawl-space condensation and mold. Most older Tacoma homes route ducts through vented, uninsulated crawl spaces. Warm indoor air moving through cold ductwork creates condensation, which traps dust and supports mold growth at joints and in flex runs throughout the wet season.
- Disconnected or crushed flex runs. In South and East Tacoma, mid-century homes with original flex duct often have runs that have collapsed or pulled apart. That means half the rooms blow weak air while the crawl space gets conditioned. We test every run after cleaning so you know each register is carrying its share.
Pricing for Air Duct Cleaning in Tacoma, WA
A full residential air duct cleaning in Tacoma runs $450-$850 depending on system size, number of returns, and how accessible the runs are. Supply or return cleaning only falls in the $250-$400 range. Video inspection as a standalone service runs $150-$250, but it’s included in our full system cleanings. Commercial jobs in Tacoma start at $900 and run higher based on square footage and duct volume. Homes that still have original gravity-furnace trunks or need sealing work after the cleaning will get a separate written line item before anything happens. You’ll know the price in writing before a single panel comes off. Call (806) 606-6902 for a written estimate, and if you already have a competitor’s quote, bring it. We’ll put our number next to it in writing at no cost under our Free Second Opinion policy.
We Also Serve Cities Near Tacoma

Our crews cover the South Sound from Tacoma, and we make the same written-price and photo-documentation promise in Federal Way, Auburn, Kent, and Renton. If you’re just across the county line and checking your options, you’ll get the same protocols on your job. For the full details on our process and what we guarantee, see our Air Duct Cleaning page or read more about Air Duct Cleaning in Tacoma for neighborhood-level coverage.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Tacoma

Ductwork in homes occupied during the ASARCO operating years can contain accumulated dust with heavy-metal particulates, and testing would be the only way to confirm what’s in yours. What we can tell you from the camera is whether there’s a significant accumulation of fine, dense dust that predates the current occupants. The cleaning removes what’s there. If you want lab testing, we’ll recommend a Tacoma environmental lab and you’ll get the chain of custody for any samples. Call (806) 606-6902 to discuss a video inspection first.
Condensation is the main driver. Warm air from the furnace hits cold galvanized duct surfaces in vented crawl spaces during the cooler months, and water beads form on the interior walls. Over decades, that cycle rusts the metal from the inside. In pre-WWII Tacoma homes, where original trunks were never insulated, the rust can be severe even if the outside of the duct looks fine. That’s why every full system cleaning here includes a camera pass through the trunk and accessible branches.
These systems need more than a wand. The original 12-inch or 14-inch round galvanized trunks often have blind pockets, low returns, and connections that were adapted decades ago with screws and tape. We use Rotobrush agitation tools and HEPA-filtered negative pressure to pull debris from those recesses, then camera-inspect to verify the run is actually clear. After cleaning, we’ll tell you if the old trunk is leaking air into the crawl space. If it is, sealing or section replacement gets a written line item before work starts.
If your Tacoma home is older and you’ve never seen the inside of your ducts, yes, it’s worth doing. A camera inspection shows you what’s actually in there before and after, and it catches problems like disconnected runs, crushed flex, or rusted sections that a standard cleaning won’t address. We include video documentation in every full system cleaning, not as an add-on you have to negotiate for. It’s part of the standard job record under Haven Standard Clause 4.
It removes the dust and the particles trapped in it. The ASARCO smelter operated from 1890 to 1985, and fine dust from that era is denser and more persistent than ordinary household dust. If your home still has its original ductwork and hasn’t been opened since, there’s likely decades of settled material in the trunk and return runs. Cleaning removes it, and sealing the system keeps outside air from pulling more in. For an exact assessment of your home’s ductwork, call (806) 606-6902.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Tacoma since 2013.




Before
After
Before
After