Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Temple City
Temple City homes collect dust differently than houses ten miles west. The base of the San Gabriel Mountains traps fine particulate matter against this stretch of the SGV, and your ductwork is where it settles. CleanRun Air Duct Cleaning handles Air Duct Cleaning for Temple City homeowners with a written price before any work starts and a photo record of every duct run when we leave. Call us at (806) 606-6902 for an estimate that won’t change once the van pulls up.
Why CleanRun Air Duct Cleaning Is Temple City’s Preferred Air Duct Cleaning Company
We’ve been inside hundreds of Temple City attics since 2013, and the pattern is consistent: post-WWII ranch homes with original duct board, retrofitted AC, and elbows packed with debris that coastal systems never see. Homeowners here don’t want a coupon visit. They want a technician who can show them the inside of their ducts beforehand. That’s what we do. Every Temple City job includes a documented photo record, every price is written before work begins under Haven Standard Clause 1, and every job is backed by the 365-Day Done Right Promise in writing.
Our uniformed, background-checked crews arrive identified by name. We coordinate from the brand’s Los Angeles office and serve Temple City locally. No third-party subcontractors. No mystery pricing. Tomas Reyes, who leads CleanRun, keeps the service standard simple: show the customer what’s actually in their ductwork, then give them a number in writing.
Our Air Duct Cleaning Services in Temple City
Temple City’s housing stock demands a specific approach. Homes here run hot attics and aging duct systems, so we prioritize the services that actually restore airflow and remove the particulate load that Santa Ana events push in.
Residential Duct Cleaning
For the ranch and split-level homes that define Temple City’s neighborhoods, we run negative-pressure extraction through every supply and return run, then camera-scope each transition to confirm the debris is gone. A typical single-system residential clean in Temple City runs $450-$780 depending on the number of runs and how much the attic heat has baked into the duct walls. The photo record you receive afterward shows exactly what came out.
Commercial Duct Cleaning
Small offices, medical suites, and retail spaces along Las Tunas Drive deal with the same SGV particulate loading as homes, but with higher occupancy hours and less tolerance for downtime. We schedule around business hours and provide the same written price and documented photo record. Commercial systems in Temple City typically run $900-$2,400 based on square footage and the number of rooftop units.
Supply Duct Cleaning
Supply ducts are where Temple City homes show their age. The retrofitted 1970s AC systems were never sized for the airflow modern cooling demands, and decades of 140°F attic heat have made the original duct board brittle. We remove the register, run extraction through each supply run, and document every seam. Supply-side cleaning on a Temple City ranch typically runs $250-$420 as part of a full system clean.
Return Duct Cleaning
This is where crews skimp, and it’s the single most common failure we correct in Temple City. A skipped return duct holds the deepest PM2.5 load from Santa Ana events, and within days it re-contaminates every supply register that was just cleaned. We clean both sides. Return duct cleaning runs $200-$380, and it’s included in our full-system pricing rather than upsold separately.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Temple City
We work on systems built around every major brand found in Temple City homes, and we carry parts for the older units that still dominate this housing stock. When a 1960s flex connector has collapsed, we replace it rather than cleaning around it. Our equipment roster includes Rotobrush and Abatement Technologies for extraction, and Nikro for HEPA filtration on jobs where fiberglass duct board has begun shedding. You don’t need to know the brands to get a good result, but you should know the contractor didn’t bring a shop vac.
Common Air Duct Cleaning Problems We See in Temple City Homes
- Collapsed flex connectors at the plenum. The original 6-inch flex ducts on 1960s systems have been through fifty summers of 140°F attic heat. We find them brittle, partially collapsed, and creating turbulence zones where debris collects heavily at every elbow.
- Fiberglass duct board shedding. Original duct board from the 1950s and 60s breaks down under thermal cycling. The lining becomes a fine airborne grit that lands on registers and in the air you breathe. Cleaning means extraction with HEPA filtration, not just brushing.
- Returns skipped by previous contractors. We’ve seen supply runs cleaned and returns left untouched, which means the PM2.5 load from the last Santa Ana event sat in the system and re-contaminated everything within weeks. That’s not cleaning. That’s vacuum noise.
- Fogging sanitizers sold as mold remediation. A fogging treatment kills surface microbials but leaves the biofilm matrix intact. In Temple City’s hot attic air, moisture returns and re-growth happens faster than it did before. Source removal is the only fix that lasts.
Pricing for Air Duct Cleaning in Temple City, CA
A full system clean in Temple City runs $450-$780 for most single-family homes. That’s the whole job: supply runs, return runs, plenum, registers, and a camera-scoped video inspection of every transition. Larger homes or systems with severe Santa Ana dust loading may run higher, but you’ll see the written number before anything starts. We don’t do per-vent pricing, and we don’t quote $79 to get in the door. The price we write is the price you pay, under Haven Standard Clause 1. Bring a competitor’s estimate and we’ll put our number next to it in writing for free.
We Also Serve Cities Near Temple City
CleanRun serves Temple City and the surrounding SGV communities: El Monte, San Gabriel, Arcadia, and Rosemead. If you’re in one of these areas and need a written price on Air Duct Cleaning, call (806) 606-6902 for a free estimate.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Temple City
Temple City sits directly at the base of the San Gabriel Mountains in one of Southern California’s most particulate-laden airsheds, so smog and fine PM2.5 accumulate against the mountain range here at higher concentrations than in mid-basin LA communities. Pasadena and Arcadia sit slightly further from the mountain face and get more western airflow, while Temple City’s position traps the particulate load. Add the Santa Ana events that funnel desert dust east-to-west through the SGV, and your ductwork loads faster than nearly anywhere in the region. Most Temple City homes should be inspected every 3-4 years, versus the 5-7 year interval often cited for coastal LA. Call (806) 606-6902 for an exact assessment of your system.
Yes, and this is the most common system type we service in Temple City. The key is extraction with HEPA filtration downstream, not aggressive brushing, because the duct board liner has been degrading for decades and can shed if handled roughly. We use Abatement Technologies extraction units and Nikro HEPA filtration to capture fine fiberglass grit before it enters living space air. After cleaning, we camera-scope every transition to verify the liner is intact. If a joint or seam has separated, we seal it rather than leaving a leak path for attic dust.
Source removal physically extracts the microbial growth and the organic debris it feeds on, while a fogging sanitizer only kills surface organisms and leaves the biofilm matrix intact. In Temple City’s hot attic air, moisture returns quickly and re-growth happens faster than before the fog was applied. We clean the coil and duct surfaces first, then apply sanitizer only if the material requires it. A sanitizer fog without source removal is an upsell, not a treatment. If a previous contractor fogged your system and the odor returned within months, call (806) 606-6902 for a camera inspection to see what’s actually still in there.
Santa Ana winds push fine desert dust from the east directly across Temple City, and the dust forces its way through any duct leakage points in the attic. Older ranch homes with retrofitted AC systems have seams and transitions that never sealed properly, so each wind event adds a fresh layer of particulate inside the ducts. The dust settles at elbows and transitions, then bakes into a hardened layer during summer attic heat. If you notice a burst of dust on your registers after a Santa Ana event, that’s the leak path, not the wind outside. Call (806) 606-6902 to have the transitions camera-scoped and sealed.
Because the original heating-era duct system was retrofitted with 1970s AC that was never sized for cooling airflow, the air velocity through the runs drops sharply at every elbow. Lower velocity means particulate settles out of the air stream in those bends, and the effect worsens as the flex connectors age and partially collapse. Dust at the elbows is a flow problem, not a cleaning problem. We camera-scope each elbow to identify collapsed or kinked sections, replace what’s failed, and re-balance the system so debris doesn’t settle there within months. Call (806) 606-6902 to schedule a video inspection of your duct runs.
In a Temple City Ranch, the Evidence Tells the Story
In a mid-century ranch on Arden Drive, our techs pulled the registers and found the original fiberglass duct board shedding into the supply runs. Attic temperatures had baked the lining into a fine airborne grit that was blowing through the home. We ran negative-pressure extraction with HEPA filtration downstream, then camera-scoped each transition and found a collapsed 6-inch flex connector at the plenum. After replacing it, static pressure in the living room vents dropped by over 40%. The customer got a photo record of the before, the during, and the after. That’s the standard for every Temple City job.
CleanRun Air Duct Cleaning serves Temple City with written pricing, documented results, and a 365-Day Done Right Promise on every job. Call (806) 606-6902 to schedule an inspection and get your written estimate before any work starts.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Temple City since 2013.
Air Duct Cleaning in Nearby Areas