Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Acworth
HVAC cleaning in Acworth typically costs $350-$750 for a full system, depending on the condition of the coils, blower, and duct runs we find once we open the panels. Most Acworth jobs are completed in a single visit, with a written price in your hand before we touch a single access panel. We work throughout Acworth’s lake-adjacent subdivisions and older in-town neighborhoods weekly, and our crews know what living within a mile of Lake Allatoona does to an air handler. Call (806) 606-6902 to schedule, and you’ll get a documented photo record of every run when we leave.
Why CleanRun Air Duct Cleaning Is Acworth’s Preferred HVAC Cleaning Company
We’ve cleaned enough Acworth systems to know the difference between a routine job and the kind of hidden damage this city’s humidity creates. A mid-1990s flex duct run in an unconditioned attic near Lake Allatoona ages differently than the same duct in Kennesaw. Our technicians operate under the H.A.V.E.N. Standard, which means background-checked and uniformed crews, a written scope before work begins, and license information published openly, not buried in a footer. Led by Tomas Reyes, our team has served Acworth-area homeowners as part of our broader metro Atlanta coverage for years, building a reputation on documented results instead of coupon pricing. Dispatch and scheduling for Acworth jobs are coordinated from our Atlanta office, with crews serving Acworth neighborhoods directly.
What separates us is what you receive long after the job is done. Every Acworth visit includes a before-and-after photo record of the inside of every duct run, captured on camera as standard procedure. Not a sample photo. Not a marketing image. Your system, your attic, your photo record. And every job carries the 365-Day Done Right Promise in writing: if it is not right, we make it right.
Our HVAC Cleaning Services in Acworth
Evaporator Coil Cleaning
In Acworth, the evaporator coil is where the lake’s ambient moisture and Georgia’s extended pollen season do the most visible damage. When the coil sits in an attic air handler that has been drawing high-pollen return air through failing duct seals, the face of the coil becomes a humid mat of organic debris. That coating insulates the coil, drives up runtime, and becomes a substrate for mold. We pull the coil housing, camera the coil face for documentation, and clean it with professional-grade equipment and coil-safe chemistry. A typical evaporator coil cleaning in Acworth runs $150-$300 as part of a full HVAC cleaning.
Air Handler Cleaning
The air handler in most Acworth homes lives in a hot, unconditioned attic. Blower wheels collect the fine pine pollen that slips past filters; condensation inside the cabinet supports biological growth on surfaces that should be dry. We remove and clean the blower assembly, clean the cabinet interior, and treat surfaces so the handler is not just wiped down but actually documented clean before we reassemble. Air handler cleaning in Acworth typically falls between $120-$250 depending on the handler type and interior condition.
Condenser Cleaning
The outdoor condenser unit is exposed to Acworth’s pollen, leaf litter, and cottonwood every spring, plus grass clippings and red Georgia clay kicked up by mowing. A clogged condenser coil forces the compressor to run harder and hotter through the long April-to-October cooling season. We clean the condenser coil with low-pressure coil cleaning agents, straighten bent fins where possible, and document the unit’s condition at the exterior slab. Condenser cleaning for Acworth homes runs $90-$180.
Coil Treatment
After cleaning, we apply a coil treatment that helps prevent that first layer of biological growth from returning in the humid attic environment. This matters more in Acworth than in drier parts of Cobb County, because the moisture that persists near the lake means a bare, untreated coil becomes re-colonized faster than you might expect. Coil treatment is included in our full HVAC cleaning package for Acworth customers at $60-$110 per coil.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Acworth
We service all major HVAC brands and equipment in Acworth, including systems built around Honeywell controls, Rotobrush-cleaned duct runs, and Guardsman-treated surfaces. Knowing the equipment matters, because a builder-grade Goodman from a 1998 Centennial Commons subdivision and a higher-end Trane from a 2015 Bentwater build present different problems. Our crews carry the right non-abrasive brushes, negative-pressure extraction equipment, and coil-safe chemistry for the particular metal and flex materials used across Acworth’s two main housing eras. That is why we specify the equipment we use on our written quotes: Rotobrush for duct agitation, Nikro for negative-pressure extraction, Honeywell for air quality diagnostics.
Common HVAC Cleaning Problems We See in Acworth Homes
- Sagging flex duct with condensation pooling. In lake-adjacent subdivisions like Bentwater, the combination of mid-1990s builder-grade installation, attic heat extremes, and elevated ambient moisture creates low spots in flex runs where water pools and liner material breaks down. A camera inspection shows us the sag before we clean anything.
- Disconnected or leaking duct connections at the plenum. Original 1990s connections in Acworth homes were often taped, not mastic-sealed. The tape fails after 20+ years, and high pine and oak pollen loads bypass the filter entirely, coating the blower motor and evaporator coil with a thick, tacky mess.
- Mold recurrence after prior cleaning because sealing was skipped. We see this constantly in Acworth: a homeowner pays for a cleaning elsewhere, and six months later the musty smell is back. The cleaning was fine. The problem is that the attic air handler kept pulling humid lake air through unsealed duct connections, re-wetting the same surfaces. Cleaning without sealing here is a half-measure.
- Crushed or partially collapsed flex duct in attic runs. Hot attics, low-quality flex, and 25-35 years of age add up. We regularly find runs that have been stepped on during other work or have simply kinked and collapsed. A crushed run is not a cleaning problem, it is an airflow problem that shortens equipment life and leaves rooms under-conditioned. We document every crushed run on camera and give you a written repair scope.
Pricing for HVAC Cleaning in Acworth, GA
Here are the real numbers for Acworth’s market. A full HVAC cleaning, including evaporator coil cleaning, air handler cleaning, blower wheel extraction, and coil treatment, runs $350-$750 for a typical 2,000-3,500 square foot Acworth home. Condenser-only cleaning is $90-$180. Evaporator coil-only cleaning runs $150-$300. If we find failed duct sealing or a collapsed flex run during the cleaning, the sealing work is priced separately in writing before anything is done, and that scope runs $400-$1,200 depending on the number of accessible runs. You will always see the full number in writing before we begin. Call (806) 606-6902 for a free estimate and a written quote.
We Also Serve Cities Near Acworth
Our HVAC Cleaning crews serve Acworth and the surrounding Cobb and Cherokee County communities. If you’re in Kennesaw, Woodstock, Marietta, or Canton, we provide the same documented photo record and written upfront pricing we bring to every Acworth job. You can also view our full HVAC Cleaning in Acworth coverage details here.
Serving Acworth, GA - Our Local Coverage Area
We’re based in the Acworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Acworth
Because the debris is not the root problem, the leaking duct connections are. Acworth’s lake-driven humidity means any gap at a plenum connection or flex takeoff pulls damp attic air into the return side of your system. You can clean every surface spotless, and within a year the same conditions return. Sealing the runs is what stops the contamination at the source. Call (806) 606-6902 and we’ll show you on camera exactly where your system is leaking before any sealant is applied.
We find more biological growth and more liner deterioration in Acworth air handlers than in homes of the same age just a few miles east in Kennesaw or Marietta. The water vapor near the lake keeps surfaces inside the cabinet damp longer, so the same pine and oak pollen load that would dry out and remain inert in a drier attic becomes a food source for mold. The air handler itself may be identical, but the environment is not.
Most original flex duct in Acworth homes of that era is at or past its usable lifespan. We routinely document sagging runs, separated inner liners, crushed sections from other trades working in the attic, and taped connections that have separated completely. The cleaning can restore what is cleanable, but the honest finding is often that some runs need replacement or re-supporting. We will tell you which it is, on camera, with a written scope. Call (806) 606-6902 to schedule an inspection.
Yes, and the math is simple. Acworth’s extended April-to-October cooling season means your blower motor moves more pollen-laden air through the system than systems in cooler climates. Georgia’s pine and oak pollen counts rank among the worst in the nation, and when those particles bypass a failing filter or leaking connection, the coil and blower cake up faster. We see this in nearly every Acworth home we open. The fix is a thorough cleaning combined with proper sealing at the access points.
You usually cannot see it without a camera, because it happens in the attic runs, but the symptoms include a musty smell when the system switches on, reduced airflow to specific rooms, and visible water staining near a register. If the smell is stronger in humid months, that is a reliable indicator. Our camera inspection shows the exact low spot and whether moisture is actively pooled inside. Call (806) 606-6902 and we’ll inspect and document it, no guessing.
What We Found Behind a Bentwater Attic Door
We pulled back the attic access in a Bentwater subdivision home and found a mid-1990s flex run that had sagged so low condensation had pooled inside, staining the liner and feeding a musty smell through the supply registers. After camera inspection confirmed a partial collapse, our crew ran negative pressure with agitation tools to clear the debris, then sealed the low spots and re-supported the run to NADCA standards. The homeowner said the difference in air quality was noticeable the same night. That is the work, documented from the first camera frame to the final photo record.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Acworth under the H.A.V.E.N. Standard.
HVAC Cleaning in Nearby Areas