Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Grapevine
HVAC cleaning in Grapevine runs between $390 and $785 for a complete system cleaning on a typical 2,000-2,800 sq ft home, with evaporator coil cleaning adding $180-$340 and blower cleaning adding $120-$220 depending on access. Most Grapevine jobs take a single day, and you’ll see photographic evidence of every duct run before we pack up. We’re the HVAC Cleaning team that works in Grapevine every week, and we know what your ducts look like before we even pull the first register. Call (806) 606-6902 for a written price, no visit needed.
Why CleanRun Air Duct Cleaning Is Grapevine’s Preferred HVAC Cleaning Company
We’ve been cleaning HVAC systems since 2013, and more than 52,000 homes have received a written price from us before any work started. Grapevine homeowners call us because we photograph the inside of every duct run, before and after, and hand that record over as part of the job. No other cleaning company working in Grapevine does that as standard practice.
Tomas Reyes runs our crews, and every technician who steps into a Grapevine home is background-checked, uniformed, and identified by name before arrival. We don’t send subcontractors. When you book with CleanRun, the person who shows up works for us, under the Haven Standard, with our equipment: Rotobrush agitation tools, Nikro negative-pressure filtration, Abatement Technologies HEPA units, and Honeywell or Aprilaire coil treatments depending on the system.
Grapevine’s housing stock is specific. We work in 1980s flex-duct subdivisions off Hall-Johnson Road, in mid-century homes near Historic Downtown, and in newer construction west toward Lake Grapevine. Each has different failure modes. We know them because we’ve cleaned them.
Our HVAC Cleaning Services in Grapevine
Evaporator Coil Cleaning
Your evaporator coil sits inside the air handler and is the part that actually cools the air. In Grapevine, coils pick up a grayish-black ultrafine film from jet exhaust particulate that settles on the coil surface and insulates it, forcing your system to run longer to hit the same temperature. We remove the access panel, document the coil condition with photos, apply a professional-grade coil cleaner, and rinse it so heat transfer improves. On a Grapevine system near DFW’s northwest boundary, this is usually the highest-impact service we do. Expect $180-$340 as a standalone job, or included in a full system cleaning.
Blower Cleaning
The blower motor and fan wheel move every cubic foot of air your family breathes. In Grapevine homes east of the airport, blower wheels accumulate a fine soot that balances unevenly and puts wear on the motor bearings. We pull the blower assembly, clean each fan blade, and photograph the result before reinstalling. A blower cleaning in Grapevine typically runs $120-$220 and takes about an hour.
Condenser Cleaning
The condenser is the outside unit, and in Grapevine it gets hit with cottonwood, oak pollen, grass clippings, and runway dust from prevailing winds. We clear the fins, straighten bent coils, and check refrigerant pressures while we’re there. A condenser cleaning in Grapevine runs $95-$185. If the coil is heavily impacted, we’ll show you a photo before we start so you can see what you’re paying for.
Air Handler Cleaning
Your air handler is the box in the attic, closet, or garage that houses the blower and coil. In Grapevine’s hot attic installations, the air handler sees temperature swings that bake debris onto interior surfaces. We clean the cabinet interior, the drain pan, the condensation line, and the blower housing. Air handler cleaning in Grapevine typically runs $250-$420 as part of a full system cleaning, depending on accessibility.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Grapevine
We clean and service systems built around Honeywell controls, Aprilaire media cabinets, and Guardsman UV lamps. If your Grapevine home has any of these installed, our crews service them regularly and know the access points, filter sizes, and typical failure patterns. We don’t push equipment you don’t need. If your existing components are clean and functioning, we tell you that and show you the photos to prove it. Our written price covers labor and professional-grade cleaning agents, nothing hidden behind a brand name.
Common HVAC Cleaning Problems We See in Grapevine Homes
- Flex duct sagging in 1980s-90s subdivisions. Homes east and north of the DFW corridor were built during the airport expansion boom, and most used flex duct that sags at low points. Debris settles in those dips and restricts airflow. A camera inspection shows it; a register vacuum won’t fix it.
- Shared dryer vent stacks in apartments and condos. Grapevine’s multifamily stock, especially near DFW’s perimeter along SH-26, often routes dryer vents through shared stacks. Cleaning one unit’s portion leaves cross-contamination from other floors. This requires building-wide scheduling and coordination we handle directly with property managers.
- Jet exhaust ultrafine film on coils and blowers. Homes within a few miles of active runways collect a grayish-black particulate film that coats evaporator coils and blower wheels. If a cleaning crew only vacuums registers and skips coil treatment, the efficiency gain is negligible. We treat the source, not the symptom.
- Converted gravity-furnace ducts in Historic Downtown homes. Grapevine’s older housing stock, some dating to the 1920s, occasionally has gravity-furnace-era duct runs converted to forced air. Those runs are often odd-shaped, partially inaccessible, or routed through original framing. We plan extra access time for these jobs and document what we can and cannot reach.
In a 1980s subdivision off SH-26 near the airport’s northwest boundary, our crew pulled supply registers and found flex duct sagging at low points, trapping a grayish-black ultrafine film from jet exhaust infiltration. We used camera inspection to map the runs, agitation tools to break debris loose, and HEPA filtration with negative pressure to extract it, restoring proper airflow and cutting the musty odor the homeowner had blamed on pets.
Pricing for HVAC Cleaning in Grapevine, TX
A full HVAC cleaning for a typical Grapevine home runs $390-$785, and that’s a written price you’ll see before we touch a single panel. Homes with two systems, extra duct runs, or limited access fall at the higher end. We don’t do per-vent pricing, and we don’t start a job and then “discover” problems that double the invoice. Haven Standard Clause 1 is the whole point: a written price before work starts, every time.
Here’s how Grapevine pricing breaks down across the services we handle most in this market:
| Service | Grapevine Price Range |
|---|---|
| Full HVAC system cleaning | $390-$785 |
| Evaporator coil cleaning (standalone) | $180-$340 |
| Blower cleaning | $120-$220 |
| Condenser cleaning | $95-$185 |
| Air handler cleaning | $250-$420 |
Your written quote includes the Documented Photo Record on every job, and it’s backed by the 365-Day Done Right Promise. If the work isn’t right, we make it right, in writing. Call (806) 606-6902 and we’ll email you a price today.
We Also Serve Cities Near Grapevine
Our crews work throughout the DFW metro, including Southlake, Colleyville, Euless, and Coppell. Each of those cities has its own housing patterns and air-quality profile, but the standard is the same: a written price, a photographed duct record, and a guarantee in writing. If you’re north or east of Grapevine, we’re probably already in your neighborhood this week.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Grapevine
Grapevine wraps around three sides of DFW International Airport, and residential HVAC systems here pull in a measurably higher load of jet exhaust ultrafine particulates, runway dust, and winter deicing-fluid aerosols than nearly any other municipality in Texas. In practical terms, Grapevine homeowners near the SH-26 corridor or the airport’s northwest boundary should plan on cleaning every 18-24 months, while homes in Southlake or Colleyville further from active runways can often go 30-36 months. If you’re seeing a grayish-black film on supply registers, the interval is already past due. Call (806) 606-6902 for a written price and we’ll assess your specific system.
Yes, we clean condo and apartment systems throughout Grapevine, including buildings with restricted parking and shared dryer vent stacks. Shared stacks are a specific problem in Grapevine multifamily stock: cleaning one unit’s portion leaves cross-contamination from other floors, so we coordinate building-wide scheduling with property managers when needed. Our equipment is designed for tight access, and our crews know how to work around Grapevine condo parking constraints. Free second opinions on any written estimate are available at no cost.
Yes, older homes near Historic Downtown Grapevine, some dating to the 1920s-1950s, occasionally have gravity-furnace-era duct configurations later converted to forced air. Those runs are often partially inaccessible or oddly routed through original framing, which requires extra access work and longer job times. We plan for this in our written quote, and our camera inspection documents exactly what we can and cannot reach. You’ll know before we start.
That film is a particulate residue pattern associated with jet exhaust infiltration, and it’s common in Grapevine neighborhoods immediately adjacent to DFW’s perimeter, particularly along the SH-26 corridor near the airport’s northwest boundary. It’s not mold, and it’s not pet dander, though it often gets blamed on both. The fix is source removal: agitation to break the film loose, HEPA filtration with negative pressure to extract it, and coil treatment to restore efficiency. Register-only vacuuming won’t address it. Call (806) 606-6902 and we’ll show you the before photos.
Grapevine sits between Lake Grapevine to the north and the DFW airfield to the south, and the localized humidity plus North Texas’s cedar pollen season from December through February pushes enormous allergen loads through systems that rarely cycle off. If you schedule HVAC cleaning, the best window in Grapevine is late February to early March, after cedar season peaks but before oak and elm pollen hit in April. Indoor microbial growth accelerates in Grapevine’s lake-humidity summer months, so a mid-summer cleaning focused on coil and drain pan treatment is also worth considering. Call (806) 606-6902 for a written price and we’ll work around your schedule.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Grapevine since 2013.