Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Moore
HVAC cleaning in Moore, OK runs $425-$780 for a full system on a typical single-family home, and most jobs are completed in half a day. That covers the evaporator coil, blower assembly, condensate line, and accessible duct runs, with a written price agreed before a single panel comes off. If you’re in Moore and your system hasn’t been opened up since the 2013 rebuild era, the condition inside is probably worse than you think. We run cameras before and after every job, so you’ll see exactly what was in there. Call (806) 606-6902 for a written quote, no phone-tag and no vague “it depends.”
Why CleanRun Air Duct Cleaning Is Moore’s Preferred HVAC Cleaning Company
Moore’s housing stock isn’t like the rest of the OKC metro. Half the homes are pre-1999 ranches built during the south-side expansion, still running original galvanized trunks through unconditioned attics that hit 140°F every July. The other half went up fast after May 20, 2013, when over 12,000 homes needed rebuilding, and much of that flex duct went in under disaster-recovery deadlines. Both types need a different approach, and that’s what we bring to every job in Moore.
Our customers in Moore tend to ask the same thing: “Can you show me what’s actually in there?” Yes. Every visit includes a documented photo record of every duct run, taken before and after with a camera probe. You don’t take our word for it. You look at the liner in the return trunk near the plenum and see the difference yourself. Tomas Reyes set that standard in 2013, and we’ve kept it on more than 52,000 homes since.
We serve all of Moore from the 73160 and 73170 zip codes, out to the rural grid roads east of I-35 where gravel drives kick up constant dust. Our crews are background-checked, uniformed, and named before arrival under Haven Standard Clause 3. You’ll know who’s walking up the driveway before they ring the bell.
Our HVAC Cleaning Services in Moore
We offer the full HVAC Cleaning scope for Moore homes, with four services that matter most in this market:
Evaporator Coil Cleaning
Moore’s red-clay dust is so fine it passes through most return filters and packs itself into the evaporator coil, cutting airflow and driving up runtimes in July. Our techs pull the coil access panel, document the buildup on camera, and clean the fins with professional-grade equipment from Nikro and Abatement Technologies. On post-2013 homes near Plaza Towers Elementary, we routinely find coil faces 40-60% occluded after a decade without service.
Blower Cleaning
The blower wheel in a Moore HVAC system takes the brunt of whatever the coil doesn’t catch. In pre-1999 ranch homes on original duct, the blower often carries a quarter-inch of caked dust on the forward-curved blades, which unbalances the wheel and strains the motor bearings. We remove the blower assembly, clean each blade, and photograph it before reinstalling. Homes along SW 4th Street that run heat pumps nearly year-round benefit most from this service.
Condenser Cleaning
The outdoor condenser in Moore sits in relentless south winds that carry red clay, cottonwood seed, and agricultural dust from open land around the city. Cottonwood season in May clogs condenser fins fast, and a dirty condenser pushes head pressures high enough to trip the compressor on 100°F days. We clean and straighten fins, document restriction, and treat the coil to slow re-soiling through the June storm season.
Air Handler Cleaning
Attic air handlers in post-2013 Moore rebuilds sit in unconditioned spaces that bake all summer. That heat cycling causes any moisture inside the handler cabinet to bond dust to surfaces, especially around blower housings and the secondary drain pan. We open the cabinet, source-remove the debris, clean the pan and drain path, and check the condensate line so you don’t get a ceiling stain in the guest bedroom. This is the service we’d tell every flex-duct homeowner in Moore to schedule first.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Moore
Moore homes carry every major brand from the south-metro supply houses: Trane, Carrier, Lennox, Goodman, Rheem, and Bryant, plus a steady number of Daikin and Mitsubishi mini-splits going into rebuilt homes. Our techs work on all of them, and we regularly clean evaporator coils on Goodman and Carrier systems that dominate the post-2013 rebuild corridor. For the cleaning work itself, we use Rotobrush negative-pressure extraction units, Nikro inspection cameras, and Abatement Technologies HEPA filtration. You can look up any of those brands before you agree to a price, and we’ll put the written quote next to whatever a competitor gave you, free of charge.
Common HVAC Cleaning Problems We See in Moore Homes
- Post-2013 flex duct that’s never been touched. Homes rebuilt in the Plaza Towers area and south of SW 4th Street went in fast, and construction debris stayed in the system. Drywall compound dust and blown-in insulation fragments have baked into flex-duct liners through ten summers of attic heat.
- Decades-old galvanized trunks in pre-1999 ranches. Original ductwork in Moore’s older neighborhoods carries 25-40 years of accumulated red-clay dust, pet dander, and whatever the previous owners left behind. The cameras don’t lie, and these trunks rarely look better than they sound.
- Storm pressure surges from April-June severe weather. Moore sits in the heart of Tornado Alley, and even when a storm passes well south of your street, the pressure differential forces exterior particulates deep into supply and return ducts. Filter changes never reach that material.
- Gravel-road dust on rural Moore properties. East of I-35 around Air Depot and the unincorporated grid roads, unpaved drives and agricultural traffic load systems with a constant fine grit that settles in the blower and coil. Homes on gravel roads clean their systems twice as often as in-town homes do.
Pricing for HVAC Cleaning in Moore, OK
A full HVAC cleaning in Moore runs $425-$780 for the typical single-family system, including the evaporator coil, blower assembly, condensate line flush, and accessible duct runs. Smaller systems or single-zone homes land at the lower end; two-story properties with long attic trunk runs and post-2013 flex duct land higher. Every job gets a written price before work starts, under Haven Standard Clause 1. That’s not a ballpark you have to negotiate later. It’s the number, in writing, before a single panel comes off. We also offer a Free Second Opinion on any written estimate you’ve received from another company in Moore. Call (806) 606-6902, describe your system, and we’ll put a number in front of you.
We Also Serve Cities Near Moore
Besides our regular work across Moore, we schedule jobs in Oklahoma City, Norman, Edmond, and Midwest City. If you live just north of the South Canadian River or south along I-35, our crews are already in the area most weeks.
Serving Moore, OK - Our Local Coverage Area
We’re based in the Moore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Moore
Because post-disaster rebuilds moved fast, and the duct systems were seldom source-cleaned after construction. Drywall dust, blown-insulation fragments, and red Oklahoma clay entered the flex duct during sheetrock finishing and stayed there, hardening into the liners through repeated attic heat cycles. In a rebuilt home near Plaza Towers Elementary, we pulled the flex runs and found the original post-construction debris still sitting in the return trunks, covered with a baked-on layer of drywall compound dust and red clay that had been cooking for a decade. A ten-year-old Moore home can be dirtier than a thirty-year-old Norman home. Call (806) 606-6902 and we’ll show you the camera footage from your own system.
Every 2 to 3 years, which is twice as often as a home on paved streets. Gravel-road dust is finer and more abrasive than pavement dust, and it loads the blower wheel and evaporator coil especially fast when Oklahoma’s south winds push it through your return. If you’re east of I-35 on the rural grid roads, factor that into your maintenance calendar.
Yes. Severe storms create massive pressure differentials, and the negative-pressure surge pulls exterior debris, insulation fibers, and even small building fragments into return and supply openings even when the structure is intact. Homes within a few blocks of the May 20, 2013 path had this happen repeatedly across multiple storm seasons. If you’ve never had the ducts camera-inspected after a close tornado pass, there’s likely material in there that your filter never saw. We’ll document it before and after. Call (806) 606-6902.
Yes, substantially. Wood smoke carries fine particulate and creosote residue that your HVAC return pulls in whenever the system runs, especially in ranch homes where the fireplace sits in the main living area. Outdoor boilers on rural Moore properties compound this with ash and agricultural dust tracked into the return path. The blower wheel and evaporator coil pick up a sticky film that standard filters can’t stop, and it reduces airflow noticeably by the second season. Our blower and coil cleaning removes it, and you’ll see the before-and-after in your photo record.
The blower wheel and the evaporator coil get dirtiest fastest in Moore, not the duct walls. Fine red-clay dust and post-construction debris make it past the filter and cake onto the coil face and blower blades, where they restrict airflow and increase strain on the motor. In post-2013 flex-duct homes, the coil is typically the critical failure point by year eight or nine. The ducts themselves look less dramatic on camera, but the debris inside them is dry, settled, and still worth source-removing. We clean all three, and the photo record shows each one.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Moore since 2013.