Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Newton
HVAC cleaning in Newton, MA typically runs $425-$780 for a full system, including evaporator coil cleaning, blower cleaning, and air handler service on a single-zone forced-air setup. Most Newton jobs take 3-5 hours, and we schedule within 4-7 business days. Call (806) 606-6902 for a written price before anyone touches a panel. That’s how we work in every Newton village, from Waban to Newton Centre to Chestnut Hill.
Newton’s housing stock is different from what most HVAC cleaning companies are used to. These aren’t 1990s suburban builds with accessible trunk lines and standard clean-out ports. They’re Victorians and Colonials and Tudor Revivals where forced air was grafted onto steam-heat homes decades after the plaster went up. That changes how we approach every job. Our crews know the village streets, the parking constraints, and the way ductwork was actually run through these houses. We plan for the walls we’ll need to open, not just the vents we’ll cover.
Call (806) 606-6902 for a free estimate with a written price, or read on to understand what HVAC cleaning really involves in Newton.
Why CleanRun Air Duct Cleaning Is Newton’s Preferred HVAC Cleaning Company
We started documenting every Newton job with before-and-after photos in 2013, long before it became a marketing line. Homeowners in Waban, Newton Centre, and Newton Highlands have told us the same thing: they hired us because we could show them what was actually inside their ducts, not just tell them it was dirty. That documented record is standard on every visit. You get photos of every duct run we touch, inside and out.
Tomas Reyes leads our Newton crews. He’s been cutting access panels through plaster-and-lath walls since the company started, and he trains every technician on the specific challenges of retrofit ductwork in pre-war homes. When a Newton customer calls, they’re getting a crew that has already worked on a dozen houses like theirs in the same village.
We answer every call with a live person, day or night. You won’t get a call center or a voicemail. You’ll get a written price under Haven Standard Clause 1 before any work begins. That’s not a promotion. It’s how every CleanRun job has operated since 2013, across more than 52,000 homes.
Our HVAC Cleaning team carries professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies. You can look those brands up independently before you agree to anything. We’d rather you verify our tools than take our word for them.
Our HVAC Cleaning Services in Newton
Evaporator Coil Cleaning
The evaporator coil sits inside your air handler, and in Newton homes it’s often buried behind a plaster wall with no access panel. When we clean it, we’re usually cutting a framed opening first, then photographing what we find. A coil caked with Newton’s spring pollen and five months of winter dust drives up energy costs and reduces airflow. We clean it with professional-grade coil cleaner, not a spray bottle, and document the before and after.
Blower Cleaning
The blower wheel moves air through your entire system, and in Newton’s older forced-air retrofits, it’s frequently the most neglected component. Dust and lint accumulate on the blades, throwing the wheel out of balance and straining the motor. A CleanRun blower cleaning in Newton homes means removing the blower assembly where accessible, cleaning each blade, and photographing the result. In multi-unit condo buildings near Newton Centre, we’ve found blowers so clogged they were running at reduced CFM without the homeowner ever knowing.
Condenser Cleaning
Your outdoor condenser unit handles heat exchange, and in Newton it lives under some of the densest tree canopy in Middlesex County. Maple, oak, and elm debris collect on the fins, restricting airflow and forcing the compressor to work harder. We clean coils and fins with equipment designed for the job, then verify the temperature differential so you can see the improvement in writing. A clean condenser in a Newton summer is the difference between a system that keeps up and one that struggles through July.
Air Handler Cleaning
This is where Newton’s retrofit ductwork creates real problems. Air handlers in pre-war homes were often shoehorned into attic spaces or basement corners never intended for mechanical equipment. Debris collects inside the cabinet, mold can develop in humid seasons, and the entire unit operates less efficiently. We clean the interior surfaces, the drain pan, and accessible components, documenting everything with photos. If the air handler sits behind a plaster wall, we cut and frame a permanent access panel so it never has to be opened blind again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Newton
We work on systems from Honeywell, Carrier, Trane, Lennox, and most other major manufacturers found in Newton homes. Our crews carry Guardsman cleaning products and Rotobrush equipment, and we keep common filters, access panel frames, and coil cleaning supplies stocked for Newton jobs specifically. That means we’re not running back to a supply house mid-job through Newton Centre traffic. We arrive prepared, with the tools and parts needed for the system in front of us, because we’ve seen enough Newton houses to know what we’ll find.
Common HVAC Cleaning Problems We See in Newton Homes
- Plaster-cavity duct runs with no access points. Mid-century retrofits in Waban and Newton Centre often pushed ducts through original wall cavities, leaving no way to inspect or clean them without cutting openings. We cut and frame custom access panels, then clean what’s actually there instead of skipping hidden runs.
- Deteriorating fiberglass liner inside galvanized trunk lines. That 1960s trunk line under your Newton basement floor may have an internal liner that’s breaking down and shedding particulates into your air. Camera inspection finds it. HEPA negative-pressure extraction removes it. You get photos of both.
- Heavy pollen and leaf debris from Newton’s tree canopy. Spring and fall are rough on HVAC systems in the Garden City. Unprotected return-air intakes on older homes pull in organic matter that settles throughout the system, feeding mold growth in humid months.
- Shared dryer vent stacks in Newton condos and multi-units. In buildings around Newton Centre and Newton Corner, dryer exhaust often runs through a shared stack. One unit’s lint buildup can block airflow for the whole stack, backing into a neighbor’s unit. Cleaning requires coordination and access that generic crews often miss.
Pricing for HVAC Cleaning in Newton, MA
A full HVAC cleaning in Newton typically runs $425-$780, depending on system size, number of zones, and access complexity. Evaporator coil cleaning alone runs $180-$280. Blower cleaning runs $140-$220. Air handler cleaning runs $220-$380. Condenser cleaning runs $120-$200. If we need to cut and frame multiple access panels through plaster walls, that adds $90-$150 per panel, which we quote in writing before cutting anything.
You get one flat price per system, in writing, before work starts. Not a per-vent price. Not an estimate that grows once we’re on site. Haven Standard Clause 1 applies to every Newton job: written price first, always. Call (806) 606-6902 for your exact number.
We Also Serve Cities Near Newton
Our crews serving Newton also cover Watertown, Belmont, Brookline, and Cambridge. If you’re in one of those communities, the same written-price policy and documented photo record apply. Dispatch is coordinated from our Boston office, and crews arrive in Newton and surrounding cities with the equipment and parts already on the truck.
Serving Newton, MA - Our Local Coverage Area
We’re based in the Newton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Newton
Because mid-century retrofits in Newton’s pre-war homes frequently routed ductwork through original plaster-and-lath wall cavities with no factory-installed access points. In Waban, Newton Centre, and Newton Highlands, we regularly cut and frame custom panels to reach trunk lines that have never been opened since installation. Without that access, a cleaning crew simply cannot clean those runs. We quote the panel work in writing before cutting, and we frame it permanently so future cleanings are straightforward. Call (806) 606-6902 to schedule an inspection and get a written price for your specific system.
Heavy tree cover means heavy organic debris in your system. Spring pollen, fall leaves, and fine organic dust from Newton’s dense canopy get pulled into return-air intakes on older homes, especially those with unprotected intakes near the ground. That organic matter settles in ducts and coils, and in humid months it supports mold growth. Homes with significant tree coverage often need cleaning every 3-4 years rather than the 5-7 typical for open suburban lots. Call (806) 606-6902 for an honest recommendation based on what we actually see in your system.
Yes, many multi-unit buildings in Newton Centre, Newton Corner, and Newtonville route dryer exhaust through a shared stack. Lint from one unit accumulates in the common pathway and can block airflow for every unit connected to that stack. Cleaning requires accessing the stack at multiple points, not just the individual dryer connection. We inspect the full pathway with a camera before and after, and we photograph the lint we remove. Call (806) 606-6902 to schedule stack inspection and cleaning for your building.
The biggest challenge is hidden runs. Those Victorians and Colonials were built for steam heat, and forced air was added decades later through wall cavities never designed for ductwork. That means irregular sizing, sharp bends, and sections of duct that cannot be reached without cutting access openings. A generic cleaning that only touches registers and visible trunk line misses the majority of the system. We cut and frame access panels, inspect every run with a camera, and clean what’s actually there. Call (806) 606-6902 for a written quote on your system’s specific access requirements.
Yes. Newton’s forced-air systems run nearly continuously from November through March, which means dust, pet dander, and other particulates cycle through the system constantly. In humid shoulder seasons, that accumulated material can support mold growth inside ducts and on coils. Homes with pets, recent renovations, or older ductwork often benefit from cleaning every 3-4 years. We’ll give you an honest answer based on camera inspection, not a calendar. Call (806) 606-6902 to schedule yours.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Newton since 2013.