Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Plano
HVAC cleaning in Plano typically runs $380 to $680 for a full system clean, done in a single visit. But Plano is not a generic market, and a cheap vent-vacuuming job will miss what is actually failing inside these homes. The city’s 1975-1995 slab-on-grade housing stock routes nearly all ductwork through unconditioned attics that exceed 150°F for months every year. That heat ages flex duct and fiberglass ductboard far faster than manufacturer ratings assume. Our crews work Plano neighborhoods weekly and know exactly what that means when we open a plenum. Call (806) 606-6902 for a written price before any work starts.
Why CleanRun Air Duct Cleaning Is Plano’s Preferred HVAC Cleaning Company
CleanRun Air Duct Cleaning has served 52,000+ homes since 2013, and a large share are Plano owners dealing with the same problem: original ductwork that is quietly degrading. Every job we do in Plano ends with a Documented Photo Record of every duct run, shot before and after. You see what we found. No narration, no sales pressure. The photos are your proof of work.
Plano customers tend to be exacting. They bought homes at high prices, they research service categories thoroughly, and they want written detail, not charm. That suits how we operate. Our pricing is delivered in writing before a panel comes off, under Haven Standard Clause 1. Our technicians are background-checked, uniformed, and identified by name before arrival. Tomas Reyes, who leads CleanRun, runs crews on a simple rule: if it cannot be photographed or put in writing, it does not get claimed.
By now, word has spread through Plano’s older subdivisions that our camera inspections routinely find what other companies miss. When we opened a plenum in an east-side Plano neighborhood off Parker Road, the camera showed the original flex duct liner had separated from decades of attic heat. A fiberglass ductboard plenum was shedding fibers directly into the supply and return streams. We performed full source removal on the air handler and blower motor using negative pressure and HEPA filtration with agitation tools, then resealed duct collars that the black-clay slab movement had torqued loose. The photo record showed all of it. That is what we mean by HVAC Cleaning done properly.
Our HVAC Cleaning Services in Plano

Evaporator Coil Cleaning
In Plano, the evaporator coil is where attic heat and spring pollen load meet. Oak, cedar, and elm pollen get pulled through the return side and bake onto the coil surface. A coil mat of even a quarter inch drops airflow and drives up runtime. We clean the coil in place, remove the access panel, capture debris with a HEPA vacuum, and apply a coil cleaner matched to the metal type. On 1980s and 1990s Plano systems, we often find the coil never got touched since installation.

Air Handler Cleaning
The air handler holds the blower motor, the coil, and sometimes the heat exchanger, all in one cabinet. In Plano’s attic-mounted systems, this cabinet is where dust, insulation fibers, and in some homes, moisture from a clogged condensate drain collect and compact. We open the cabinet, remove loose debris, clean the blower assembly, and flush the condensate pan and line. This is the single most skipped step in cheap cleaning offers, and it is the step that matters most for air quality in a Plano home.

Blower Cleaning
A blower wheel caked in clay dust and pet hair moves less air with more noise. Plano’s high-wind thunderstorm seasons stir fine clay particulates that settle inside return ducts and get pulled straight to the blower. We remove the blower assembly, clean each blade or vane, and check the capacitor and bearing noise while we are in there. A dirty blower in a 30-year-old Plano system is often working 20 to 30 percent harder than it should be.

Condenser Cleaning
The condenser sits outside, and in Plano it faces a different enemy: pollen, cottonwood, lawn clippings, and baking clay soil that hardens into crust on the coil fins. We clear debris, apply a coil cleaner rated for outdoor aluminum or copper fins, and rinse with controlled pressure so the fins do not bend. A clogged condenser in a Plano summer means your refrigerant runs hotter and your system runs longer for the same cooling.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Plano
Plano’s housing stock spans every major HVAC brand, and we service them all: Trane, Carrier, Lennox, Rheem, Goodman, American Standard, Daikin, and York. For cleaning work, we use professional-grade equipment from Rotobrush and Nikro, with HEPA filtration units from Abatement Technologies. Those names matter because you can look them up independently and see the difference between a real extraction machine and a shop vac with a spinning brush. We carry Guardsman surface treatments and Honeywell air quality components for Plano jobs that call for them. Our equipment list is published, not hidden. That is the point.
Common HVAC Cleaning Problems We See in Plano Homes

After years of crawling Plano attics, these are the four failure patterns we see most often.
- Brittle flex duct liner separation. Plano attics sit above 150°F from May through September. Original flex duct from the 1980s and 1990s cannot take those repeated thermal cycles forever. The inner liner separates, the duct loses its shape, and debris collects in the folds. In Frisco or Prosper, where most homes post-date 2000, this failure is rare. In Plano, it is routine.
- Fiberglass ductboard plenum delamination. Older Plano systems used fiberglass ductboard for the plenum, and decades of heat plus humidity cause the inner surface to erode. The result is glass fibers in your supply air stream. We see this mostly in central and east Plano subdivisions built before 1990.
- Disconnected duct collars from clay-soil movement. Plano’s expansive black-clay soils heave and settle with moisture. That movement torques attic duct connections loose at the collars over 20 to 30 years. We routinely find attic air bypass blowing conditioned air into the insulation. A standard vent cleaning never catches this. Our camera inspection does.
- A mat of pollen and dust on the evaporator coil. Plano’s spring pollen load is heavy, and return-air systems pull it inside. When the coil gets caked, your AC runs longer and your house feels warmer. In slab-on-grade homes with no basement, the return path picks up clay dust too. That combination is specific to this region.
Pricing for HVAC Cleaning in Plano, TX
A fair, honest HVAC cleaning in Plano runs $380 to $680 for a complete system, depending on home size and the number of returns and supply runs. An evaporator coil clean alone runs $180 to $280. Blower cleaning runs $150 to $220. Air handler cleaning, which includes the blower and condensate line, runs $240 to $380. Condenser cleaning runs $120 to $200. We never quote per-vent pricing, and we never start with a teaser coupon that grows into a trailer full of add-ons. You get one written price per system before any work begins. That is Haven Standard Clause 1, and it is not negotiable.
If you have a written estimate from another Plano company, bring it to us. We will put our number next to it in writing. The comparison tells the story.
We Also Serve Cities Near Plano

Our crews serve Plano and the surrounding North Dallas suburbs weekly. If you are in Allen, Richardson, The Colony, or Sachse, we bring the same written-price policy and documented photo record to your door. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the crews working your street are local and know these attics. Call (806) 606-6902 to schedule.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Plano

Plano’s residential build-out centered on 1975-1995, which means the original flex duct and fiberglass ductboard in those homes have endured 30 to 50 Plano summers now. Attic temperatures in Plano regularly exceed 150°F from May through September. That sustained heat ages flex duct liners and ductboard far beyond what manufacturers rate for. Frisco and Prosper were built out largely after 2000 with modern duct materials and better attic ventilation, so they do not face the same thermal degradation curve. If your Plano home still has original ductwork, the degradation is not a future risk. It is already happening.
Call (806) 606-6902 for a camera inspection and a written quote. Estimates are free.
Yes. Plano sits on expansive clay soils that swell when wet and shrink when dry. That movement heaves slab foundations through seasonal cycles, and over 20 or 30 years, that movement torques attic duct connections loose at the collars. The result is disconnected sections blowing conditioned air directly into the attic insulation. We find this most often in central and east Plano subdivisions, where the clay is heaviest. Our camera inspection covers every collar, and we photograph each connection before and after sealing.
Call (806) 606-6902 to have your duct collars checked.
No. Fogging a sanitizer into ducts that still contain debris, dust, and separated liner material does not remove the source of microbial growth. In Plano’s aging flex duct, moisture trapped in thermal-cycled liners keeps feeding microbial growth weeks after the fog dissipates. The only thing that works is full source removal: physically extracting the debris and contaminated material, cleaning the air handler and coil, then resealing the duct runs. A sanitizing fog without source removal is like mopping a floor that still has trash on it. You will pay for a smell that fades and a problem that returns.
Call (806) 606-6902 and ask about our source removal process. We will show you the before and after photos.
Every 2 to 3 years, if the ductwork is original or was replaced before 2000. Plano’s combination of attic heat, spring pollen load, and clay-dust particulates means return-air systems accumulate debris faster than the national average. If you are seeing dust on vent grilles shortly after cleaning, or if rooms stay unevenly warm in summer, the ductwork itself may be degrading and need more than cleaning. We will tell you the truth after the camera inspection, and the photo record will show you what we saw.
Call (806) 606-6902 to schedule a cleaning or a camera inspection.
If the particles are coming from inside the ductwork, yes. In Plano homes built 1975-1995, the most common source is a delaminating fiberglass ductboard plenum. The inner surface breaks down from attic heat and humidity, releasing glass fibers into the air stream. Cleaning alone may not stop it. The plenum often needs to be sealed or replaced, and the duct runs need source removal to pull out fibers already loose in the system. Our photo record identifies the exact source and shows you what remains after the work is done.
Call (806) 606-6902 for a free estimate and a written plan.
Contact CleanRun Air Duct Cleaning in Plano
If you live in Plano and your HVAC system has not been cleaned in years, or if you are seeing dust on vent grilles, uneven cooling, or attic air bypass, we can help. Every job starts with a written price. Every job ends with a photo record of every duct run. No exceptions, no upsell ambush. Call (806) 606-6902 today to schedule your free estimate. The estimate is free, the written price is guaranteed, and the photos are yours to keep.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Plano since 2013.




Before
After
Before
After