Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Studio City
HVAC cleaning in Studio City typically runs $395-$695 for a full system on a standard 1940s-1960s ranch home, with most jobs completed in 4-7 hours. Our crews work the canyon-mouth streets off Fryman Canyon Road, Coldwater Canyon Avenue, and Laurel Canyon Boulevard every week, so we know what this geography does to ductwork. If you’re seeing dust settle back onto registers within days of wiping them, or a musty smell when the blower kicks on, call (806) 606-6902 for a written price before any work starts. That’s how CleanRun Air Duct Cleaning has operated since 2013: no vague estimates, no scope creep after the van pulls up.
Why CleanRun Air Duct Cleaning Is Studio City’s Preferred HVAC Cleaning Company
Studio City homeowners call us because we document what we find. Not with adjectives. With photos. Every HVAC Cleaning job includes a camera inspection of every duct run before and after, delivered as a standard job record. If the return ducts off Fryman Canyon Road show a 3-inch debris build-up at the first elbow, you’ll see that photo. If the blower wheel is caked with gray ash, you’ll see that too. We’ve cleaned systems in post-war bungalows along Ventura Boulevard and hillside custom builds above Mulholland Drive, and the evidence-first approach is the same: written price, documented work, no exceptions.
Tomas Reyes founded CleanRun in 2013 and has held the line on one thing since day one: the H.A.V.E.N. Standard. Clause 1 is a written price before any work starts. Every single time. Our technicians are background-checked, uniformed, and identified by name before they step into your home. When you call our Los Angeles office, a live person answers and schedules your Studio City service. We don’t route you through a call center in another state.
Our HVAC Cleaning Services in Studio City
Evaporator Coil Cleaning
The evaporator coil sits on the supply side of your system and does the actual cooling work. In Studio City’s canyon-adjacent homes, humid marine air moving through the passes meets this cold coil and condenses, which is exactly where microbial growth starts. A clogged coil forces the system to run longer to hit the same setpoint, and that’s money leaving your house every summer afternoon when the San Fernando Valley heat trap pushes daytime highs 15-20°F above the Westside. We inspect the coil with a camera, document the before state, clean it with professional-grade equipment, and photograph the result. Evaporator coil cleaning in Studio City typically runs $150-$250 as part of a full system cleaning.
Blower Cleaning
The blower motor and wheel move conditioned air through every duct run in your house. When ash and fine chaparral particulate from canyon fires settle into the blower wheel, it throws dust even after the ducts have been cleaned. Our crew recently worked a 1950s ranch off Fryman Canyon Road where the return ducts showed visible gray ash and pink fire-retardant dust inside; after source removal on the duct runs, cleaning the blower wheel was the difference between “better” and “fixed.” Blower cleaning as a standalone runs $160-$240 in Studio City, depending on access and how much debris has accumulated on the wheel.
Air Handler Cleaning
Your air handler is the cabinet that houses the blower, the evaporator coil, and often the filter rack. In older Studio City homes with original or once-retrofitted duct systems, the air handler is frequently the dirtiest component because it’s downstream of every gap in the return path. We clean the entire cabinet, the blower assembly, and the coil, removing the material that recontaminates freshly cleaned ducts. Air handler cleaning runs $180-$320 in Studio City’s market, and on post-war bungalows with 50-70-year-old duct systems, we strongly recommend pairing it with a full duct clean rather than doing it in isolation.
Condenser Cleaning
The outdoor condenser unit sheds heat to the outside, and in Studio City’s canyon-mouth location, it collects dust, ash, and fire-retardant residue every time the Santa Anas blow through the passes above the city. A blocked condenser coil drives up energy use and shortens the compressor’s life. We clean the coil fins, straighten them where needed, and clear the surrounding area so the unit can actually breathe. Condenser cleaning runs $100-$200 in Studio City and is a straightforward job that pays for itself in cooling season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Studio City
Our technicians work on every major HVAC brand found in Studio City homes, including Carrier, Trane, Lennox, Rheem, Goodman, and Daikin. For the cleaning equipment itself, we run Rotobrush and Nikro systems with HEPA-filtration, and we use Guardsman treatments where a surface-level antimicrobial application is actually warranted after source removal. We carry common parts and filters for the systems we see most often on Studio City jobs, which means less waiting when a job reveals a cracked condensate pan or a failed filter rack.
Common HVAC Cleaning Problems We See in Studio City Homes
- Ash and fire-retardant residue inside duct runs. Homes along Fryman Canyon Road, Coldwater Canyon Avenue, and the hillside streets above Ventura Boulevard show a signature gray ash and pink retardant dust inside return ducts years after brush fires. This material is fine enough to stay suspended and re-enter living spaces every time the blower cycles, and vacuum-only cleaning will not remove it from duct walls.
- Disconnected or deteriorated duct joints in 1940s-1960s ranch homes. Studio City’s flatland housing stock dates back to Hollywood’s expansion era, and we routinely find separated joints and collapsed flex runs in crawlspaces during cleaning. Reconnecting and sealing those runs is part of a complete job, not an upsell.
- Microbial growth on evaporator coils from humid marine air. The passes between the Santa Monica Mountains and the Valley funnel coastal air into Studio City, and that moisture condenses on cold coils. Skipping evaporator coil cleaning in a canyon-adjacent home means the clean ducts get recontaminated within weeks.
- Overheated blower motors from long run times. Studio City’s inland Valley climate forces central HVAC systems to run far more hours per year than in Santa Monica or Venice. The accumulated dust on the blower reduces airflow, and the motor runs hotter as a result. Cleaning the blower wheel and the surrounding cabinet extends the life of a component that’s expensive to replace.
Pricing for HVAC Cleaning in Studio City, CA
A full HVAC cleaning on a standard Studio City ranch home runs $395-$695, depending on system size, number of duct runs, and accessibility. That includes source removal of the supply and return ducts, evaporator coil cleaning, blower cleaning, and the air handler cabinet. For homes with multiple zones or hillside duct routing above Ventura Boulevard, add $150-$350. We write the price down before a single panel comes off, under Haven Standard Clause 1. No per-vent pricing games. No “call for a quote.” Bring us a competitor’s written estimate and we’ll put our number next to it in writing, free. Call (806) 606-6902 for your price.
We Also Serve Cities Near Studio City
Our crews serve Studio City and the surrounding communities, including North Hollywood, Universal City, Van Nuys, and West Hollywood. If you’re in one of those areas, you can read more about our HVAC Cleaning in Studio City coverage and what to expect from a CleanRun job, or call us directly for scheduling. The same written-price standard applies everywhere we work.
Serving Studio City, CA - Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Studio City
Studio City sits directly at the base of the Santa Monica Mountains where Fryman Canyon, Coldwater Canyon, and Laurel Canyon open into the Valley floor, creating a natural funnel for wildfire smoke, ash, and dry chaparral particulate. When fire events like the 2019 Getty Fire or recurring Mulholland-area brush fires occur, that particulate is drawn into residential return ducts and settles on duct walls, where it remains until physically removed. Vacuum-only cleaning without agitation leaves this ash caked in place. Source removal with HEPA-filtered negative pressure and mechanical agitation is what actually gets it out. Call (806) 606-6902 to schedule an inspection with documentation of what’s inside your ducts.
No. Fogging a sanitizer into ducts that still have standing debris and microbial growth on the evaporator coil addresses nothing. The moisture problem in Studio City’s canyon-adjacent homes comes from humid marine air condensing on cold coils, and the only effective sequence is source removal first: clean the ducts, the coil, and the blower. Then, if surface treatment is warranted, we use Guardsman products on accessible surfaces and document what was applied and why. Anyone selling fogging as a substitute for cleaning is selling a smell. Call (806) 606-6902 for a written scope that separates actual cleaning from optional treatments.
Every 2-4 years, depending on fire seasons and how much dust the Santa Anas push into the home. A 1950s ranch off Fryman Canyon Road with original ducts and a canyon-facing return will accumulate ash and fine particulate faster than a newer build further from the passes. After significant fire events anywhere in the Santa Monica Mountains, we recommend an inspection even if you’re inside the 2-year window. The camera will tell you whether cleaning is due. Call (806) 606-6902 to book an inspection.
Yes. Hillside custom builds and mid-century homes above Ventura Boulevard often have non-standard duct routing added during remodels, with steeper runs, smaller access points, and less predictable layouts than the crawlspace-accessible duct systems common in flatland Studio City ranches. That adds labor time and sometimes requires additional access panels. Our written price reflects the actual duct layout, not a flat assumption. Call (806) 606-6902 and we’ll scope it from the plans or a pre-inspection walkthrough.
Yes, because the system simply runs more hours. Studio City regularly hits temperatures 15-20°F above Westside neighborhoods, which means central HVAC runs far longer during cooling season, pulling more air across the coil and through the ducts. Every hour of run time deposits more dust and particulate inside the system. Westside homes in Santa Monica or Venice run their air conditioners far less, so their ducts accumulate material slower. Studio City homes need more frequent attention, full stop. Call (806) 606-6902 for a written price on a complete HVAC clean.
Contact CleanRun Air Duct Cleaning in Studio City
We’ve cleaned systems on the flatland ranch streets and the hillside streets above Ventura Boulevard, and we know what this canyon-mouth geography does to ductwork. If you want a written price, a documented photo record, and work that’s backed by the 365-Day Done Right Promise, call (806) 606-6902 for a free estimate. Tomas Reyes and the CleanRun team serve Studio City with one standard: evidence first.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Studio City since 2013.
HVAC Cleaning in Nearby Areas
