Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Dallas, NY | CleanRun Air Duct Cleaning
Trane Air Duct Cleaning in Dallas typically runs $450 to $900 for a full system, and we complete most jobs in a single visit. CleanRun Air Duct Cleaning is an independent Trane service provider, not manufacturer-affiliated. What makes our work different here is simple: we photograph every duct run before and after, so you see exactly what was inside. Call (806) 606-6902 for a written quote before any work begins.
We’ve been servicing Trane systems across Dallas since 2013. The homes here sit on expansive clay that moves with every rain and drought cycle, and that movement works its way into your ductwork. We know what that does to Trane equipment because we’ve opened thousands of attic hatches from Lake Highlands to Oak Cliff and seen the same failure patterns repeated. If you own a Trane system in this city, your ducts are fighting a slow battle against the ground beneath your slab.
Why Dallas Residents Choose Us for Trane Service
Most companies treat a Trane system like any other box in the attic. We don’t, because Dallas attics are unlike attics almost anywhere else. A Trane air handler in a Lake Highlands ranch endures a different life than the same unit in a city with basements. Tomas Reyes, our owner and lead technician, grew up in Queens working on buildings where ductwork hadn’t been touched in decades. That experience taught him to look at what’s actually happening inside a system rather than what the spec sheet claims. He brings that same scrutiny to every Trane we service in Dallas.
We stock the common flex sizes, mastic, and coil cleaners Dallas homes need, so repairs don’t stall while parts get ordered. When a Trane part is needed, we use OEM. When duct materials need replacing, we carry aftermarket flex and sealing products that meet or exceed original specs. The pricing is written before we unscrew a single panel. No call for a quote, no estimate roulette. You’ll see the number in writing first.
Common Trane Air Duct Cleaning Problems We Solve in Dallas
- Flex-duct connections pulled loose at the supply plenum. Dallas’s clay soil swells after rain and shrinks during dry spells, which makes slabs heave and settle. A slab that moves a quarter inch can pull a flex connection off a Trane air handler, and then attic air pours into your living space. We reattach, reseal, and re-photograph.
- Collapsed or kinked flex runs. Installers often leave too little slack in attic runs, and years of 140°F attic heat soften the outer jacket until the inner liner folds. This starves the Trane system of airflow, makes the blower work harder, and leaves far bedrooms warm in July. We replace the run with proper slack and support.
- Fiberglass duct board shedding into the airstream. Homes built in Dallas during the 1960s through the 1980s often have original fiberglass duct board. After 40+ summers in a hot attic, the board becomes brittle and releases fibers that coat the Trane evaporator coil. We show you the before photo of the coil, then clean it.
- Trane evaporator coil fouled by allergen buildup. Dallas’s pollen calendar runs nearly year-round: Ashe juniper in winter, oak and elm in spring, ragweed in fall. During the April-to-October cooling season, your Trane system pulls that pollen through the return and deposits it on a wet coil. That’s where it sticks. We clean the coil as part of a full duct service when it’s needed.
- Microbial growth on coils from recirculating biological debris. When pollen, dust, and Dallas humidity combine on a Trane coil, the result is often a musty smell at the registers. We remove the organic layer, sanitize the coil surface, and document the result on camera.
BeforeAfterTrane Service in Dallas: What Local Conditions Mean for Your Equipment
Here’s what’s different about Dallas, and it affects every Trane owner here. The metro sits atop some of North America’s most expansive black clay soils. That clay swells when it gets wet and shrinks when it dries, which means the slab under your house is never actually still. It rises after heavy rain, settles during drought. Since virtually every Dallas home is slab-on-grade with no basement, all your ductwork runs through the attic. When the slab moves, the structure shifts, and that shift transfers up through walls and ceilings into the attic framing. The flex duct connecting your Trane air handler to the supply plenum gets pulled. Joints open. Attic air, which is hot, dusty, and full of insulation fibers, rodent dander, and construction dust from Dallas’s continuous building boom, gets drawn right into your living space. This soil-movement-plus-attic-duct pattern is the defining driver of duct problems here. A Trane owner in a city with basements and stable soil simply never sees this failure mode. In East Dallas and Oak Cliff specifically, our crews now carry extra flex and mastic on every truck because separated joints and kinked runs are so common in the clay-heavy zip codes. We see it often enough that it’s become part of the standard kit.
Trane Models & Products We Service in Dallas
We work on the Trane equipment Dallas homes actually have. That includes Trane RunTru central air conditioning units, which are common in the tract-built ranch homes across Farmers Branch and Oak Cliff. We see plenty of Trane XR series heat pumps and air conditioners, especially in Far North Dallas subdivisions built during the 2000s. Trane Hyperion air handlers are frequent in newer master-planned developments. And for homes with Trane ComfortLink II communicating systems, we approach the job with the same camera-first, written-scope discipline. We also service the sub-components most affected by duct problems: flex duct repair, duct sealing, evaporator coil cleaning, and our HVAC Cleaning in Dallas includes blower cleaning. When an OEM Trane part is required, we use it. When duct materials need replacing, we use premium aftermarket flex, mastic, and insulation that meet or exceed the original duct specs. Our recommendation is always honest: if your Trane air handler or coil is still within its service life, we clean and seal. If it’s failing, we tell you to consider replacement rather than patching.
This is the Trane work we do across Trane sales & service and throughout our Dallas service area.
Trane Service Pricing in Dallas
For a full Trane air duct cleaning on a typical Dallas slab home, expect to pay $450 to $900 depending on system size, number of runs, and accessibility. Homes with extensive flex-duct damage, collapsed runs, or heavily fouled coils will land on the upper end or exceed it if repairs are needed. Duct sealing and flex replacement are quoted separately and in writing before work starts. That’s Haven Standard Clause 1: written price before any panel comes off. You’ll know the full number before we begin.
Factors that influence cost in Dallas specifically include attic access (some older East Dallas homes have tight scuttle holes that slow the work), the number of separated flex connections we find, and whether your Trane coil needs the full removal-and-clean treatment. A free estimate includes a camera inspection of your duct interior and a written scope. Call (806) 606-6902 to schedule one. If you already have a competitor’s written quote, bring it. We’ll put our number next to it in writing.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Dallas
Because Dallas’s allergen calendar runs nearly year-round, your Trane system pulls Ashe juniper, oak, elm, and ragweed pollen through the return constantly during the long cooling season from April through October. When duct joints have separated due to slab movement, attic dust and insulation fibers also enter the airstream upstream of the filter, so the filter loads faster than it should. If you’re changing filters monthly and they’re caked, the ductwork itself is likely the source. Call (806) 606-6902 and we’ll camera the ducts to find where the attic air is getting in.
When the clay soil under your Dallas slab expands and contracts with moisture, the frame of your house shifts. That movement transfers into the attic and pulls flex duct connections loose from the Trane air handler supply plenum and return boxes. Once a joint opens, conditioned air leaks into the attic and unconditioned attic air gets drawn in. Your system has to work harder to hit the same setpoint, and rooms at the end of the run stay warm. We find this pattern regularly in Lake Highlands, Oak Cliff, and East Dallas homes.
Yes. A new filter doesn’t help if airflow is restricted upstream by collapsed flex runs, kinked ducts, or debris-packed returns. Low airflow across the coil is the most common cause of coil freeze, and Dallas attics are full of flex runs that have been crushed, kinked, or separated by years of slab settlement. We fix the airflow problem first, then clean the coil. Call (806) 606-6902 if you’re seeing frost or ice on the line set.
That smell is typically microbial growth on the evaporator coil. During the off-season, pollen and organic debris sit on the coil surface. When cooling season starts and moisture condenses on the coil for hours each day, that organic layer becomes a growth medium. In Dallas, where winter juniper and spring oak pollen have been recirculating for months, the first hot week often triggers the smell. A coil cleaning and sanitizing treatment addresses the source rather than masking it with a deodorizer.
If the duct board is brittle, crumbling, or shedding fibers onto the coil, replacing it with modern insulated flex or rigid duct is usually the better long-term choice. Patching decaying duct board occasionally makes sense for a short-term fix until replacement is budgeted. In Dallas homes from the 1960s through 1980s, this is a common decision. We’ll show you the camera footage and give you both options in writing. Call (806) 606-6902 for an inspection.
Service Areas Near Dallas
We serve Dallas and the surrounding metro. If you’re in New York City, Los Angeles, Chicago, Brooklyn, Houston, or Queens, visit our Trane service in San Jose or Trane service in Austin pages for coverage details.
Book Your Trane Service in Dallas Today
Our tech spent an afternoon in a Lake Highlands ranch where the Trane XR heat pump ran constantly but upstairs rooms stayed warm. In the attic, we found a separated flex duct at the supply plenum, a kinked run collapsed under its own weight, and original fiberglass duct board shedding fibers. We replaced the damaged flex, sealed all joints with mastic, and cleaned the blower wheel and coil. The homeowner reported balanced temperatures across both floors the next day. That’s the kind of documentation you get with every job. The photo tells you what’s in there. Everything else is just paperwork.
Call (806) 606-6902 to schedule your Trane system inspection. Written price before work starts, photo record when we leave.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Dallas since 2013.