Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Austin, NY | CleanRun Air Duct Cleaning
Air Duct Cleaning - Austin for Trane systems runs $450-$900 for a full single-system home, and the work takes four to six hours. CleanRun Air Duct Cleaning is an independent Trane service provider serving homeowners across Austin, not a manufacturer-authorized agent. What makes our Trane work different here: we know how Austin’s mountain cedar pollen and 140°F attic heat combine to clog and degrade Trane duct systems faster than anywhere else in Texas. Call (806) 606-6902 for a written price before anything comes apart.
We work on Trane XR and XL air handlers, Hyperion systems, and RunTru ducted setups in Austin’s older ranch neighborhoods every week. We document every duct run with before-and-after photos. The photo tells you what’s in there. Everything else is just paperwork.
Why Austin Residents Choose Us for Trane Service
Our techs open Trane air handlers in Austin attics weekly, so we know how these systems behave in this specific climate. Tomas Reyes, our owner and lead technician, completed his Austin HVAC Cleaning coursework at Queensborough Community College and spent years working residential and commercial duct systems before founding CleanRun in 2013. What he learned in that time carries over directly to Trane work in Austin: aluminum coils corrode faster here, flex duct disintegrates faster here, and the only way to know what a Trane system actually needs is to put a camera in it first.
We are an independent service provider. That means we do not sell Trane equipment and have no incentive to recommend replacement over repair. What we do is document what is actually inside your ducts, write a price down, and let you decide. Our crews carry OEM-compatible Trane blower wheels and coils when heat exchange or airflow is involved, and we stock high-grade aftermarket flex duct and mastic for repair sections where the brand name does not affect performance.
Every Austin job ends with a photo record of each duct run, before and after. That has been our standard since the first CleanRun job in 2013, and it is why homeowners who research their options tend to land on us: we can show the work was done, not just claim it.
Common Trane Air Duct Cleaning Problems We Solve in Austin
- Trane aluminum evaporator coil corrosion. Austin’s shoulder seasons bring humidity swings that pit Trane’s aluminum coils faster than drier climates. Fine metallic debris from pitting embeds in fiberglass duct liners downstream, then re-releases when the blower ramps up. We clean the coil and the liner, and we photograph both before touching anything else.
- Variable-speed blower surging in hot attics. Trane variable-speed ECM motors run rich at lower speeds, but in Austin’s 140-150°F attic air they often fail to ramp properly. The surging flow redistributes dust and cedar pollen that settled during off cycles back into breathing air. Camera inspection catches the surging pattern in the debris distribution.
- Foil-faced ductboard connection breakdown. Trane’s foil-faced ductboard connections break down quicker under sustained attic heat, releasing fiberglass fibers into the return airstream. In Austin neighborhoods like Allandale and Crestview, where original 1980s ductboard is still in service, this is one of the most common findings our camera crews document.
- Drain pan cracking from thermal cycling. Austin’s wide temperature swings crack Trane air handler drain pans over time. The leak drips into accumulated duct debris, turning it into a hardened, sticky mat that brushes and negative-pressure extraction alone will not remove. We flag the pan during video inspection and include the repair scope on the written quote before work starts.
- Collapsed flex duct in unconditioned attics. Older Central Austin homes in Brentwood and Cherrywood routinely have partially collapsed or fully detached flex runs from decades of 140°F attic heat. A cleaning quote often becomes a repair scope once the camera shows the extent of the collapse. We price both on the same written estimate.
BeforeAfterTrane Service in Austin: What Local Conditions Mean for Your Equipment
Here is the fact that changes everything for Trane owners in Austin: mountain cedar pollen counts here exceed 20,000 grains per cubic meter every December through February, which ranks among the highest recorded anywhere in North America. Trane systems with high-MERV filters actually trap more of this fine pollen inside the ductwork rather than letting it pass through to living spaces. That means post-cedar-season cleaning in Austin recovers noticeably fuller debris bags than any other metro in Texas. Dallas and Houston do not experience this because they lack the Ashe juniper density of the Hill Country. In Brentwood last February, we opened a 1980s Trane XR air handler and found the return duct completely lined with a sticky, pale-yellow film. Cedar pollen fused with dust from the variable-speed blower running nonstop since Thanksgiving. Our video inspection showed the flex duct from the return plenum had collapsed in the attic heat, so we replaced that run, brushed the blower wheel, and pulled three full vacuum loads of pollen-laden debris before the system could breathe again.
The takeaway for Trane owners in Austin is that duct cleaning here is not a generic maintenance task. It is a response to a specific, measurable event that happens every winter when cedar pollen loads spike while homes stay sealed and systems keep running. If your Trane has a high-MERV filter and you live in Allandale, Crestview, or any other Austin neighborhood with original ductwork, the inside of your ducts likely carries more pollen residue than you would find in a comparable Houston home after two full years.
Trane Models & Products We Service in Austin
We work on Trane XR series air handlers, Trane XL series heat pumps, Trane Hyperion air handlers, and Trane RunTru ducted systems. That covers the majority of what was installed in Austin’s 1970s-1990s ranch homes as well as newer builds. Our approach to parts is straightforward: when a component directly affects airflow or heat exchange, we recommend OEM. That means Trane coils and Trane blower wheels, sourced from the same manufacturer your system was built with. For flex duct, mastic, and other repair material, we use high-grade aftermarket products that perform as well or better at a lower price. This distinction saves Austin homeowners real money without cutting corners on the parts that matter.
If your Trane air handler is more than twelve years old and has both a corroded coil and sagging duct runs, we will often advise a full duct system replacement plus a coil replacement rather than repeated spot fixes. The math works out for most Austin homes because the attic heat guarantees the remaining flex will fail soon anyway. You will get the written scope with both options priced before any work begins.
Trane Service Pricing in Austin
Trane air duct cleaning in Austin typically runs $450 to $900 for a single-system home based on the number of duct runs and the level of debris buildup. Homes with collapsed flex duct or severely corroded coils will see repair or replacement line items added to the same written estimate. We never quote per-vent pricing and never start with a teaser coupon. You get one flat price per system, written down before a single panel comes off.
What drives the cost in Austin specifically is the condition of the original ductwork. A 1980s ranch in Allandale with original flex duct and a pitted coil will take longer and require more scope than a post-2000 home with modern sealed ductwork. The free estimate includes camera inspection of every duct run, so you know exactly what the quote covers before deciding. Call (806) 606-6902 for a written price.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Austin
Your filter handles the air entering the blower, but Austin’s mountain cedar season runs December through February with counts over 20,000 grains per cubic meter, and much of that fine pollen bypasses standard one-inch filters or embeds in duct liners and elbows during off cycles. When the blower ramps up, it redistributes settled debris through the living space. The camera shows what the filter cannot catch.
Yes. We access the coil through the air handler’s service panel and use a combination of coil-safe foaming agents and low-pressure rinse to break down embedded Austin pollen and dust without removing the coil. If the coil is severely pitted from years of humidity cycling, we document it and include a replacement line item on the written estimate.
Video inspection answers that question before any work is quoted. In Austin attics, partially collapsed or detached flex duct is common enough that what looks like a dirty duct problem is often a mechanical failure of the duct run itself. We replace the failed run, then clean the system, and the photo record shows both.
Yes. Austin homes run blowers for heat and circulation all winter, and Trane systems with high-MERV filters trap more fine pollen in the ductwork rather than pushing it through. What we pull out of Austin ducts in February and March is visibly different from any other season: the debris is finer, stickier, and denser with pollen residue. Call (806) 606-6902 if you want a free camera inspection to see what is actually in yours.
No. Routine cleaning and duct maintenance does not void a Trane warranty, and we are an independent service provider, not a manufacturer-authorized agent. What protects you is the written work record and photo documentation we provide, which demonstrates the work was completed properly. If a warranty claim ever depends on maintenance history, you will have both.
Service Areas Near Austin
Austin service area is our home base, and we also handle select Trane work in New York City, Brooklyn, Queens, and Los Angeles for clients who maintain properties in multiple metros. Our Trane service in Jacksonville and Trane service in San Francisco pages provide the same written-price standard for those regions. If you are in Austin or any surrounding zip, call (806) 606-6902 and we will be direct about coverage. For broader context on our Trane expertise across all service areas, see Trane sales & service.
Book Your Trane Service in Austin Today
Written price first. Camera inspection included. Photo record of every duct run when we leave. Call (806) 606-6902 and we will set a time that works around your schedule, not ours.
Written by Tomas Reyes, Owner & Lead Technician at CleanRun Air Duct Cleaning, serving Austin since 2013.