Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Denver, NY | CleanRun Air Duct Cleaning
We provide independent Trane air duct cleaning and our HVAC Cleaning in Denver, and the one thing that separates our Trane work here is simple: we know exactly where wildfire smoke and high-desert dust accumulate inside Trane cabinet and duct design. Since 2013, our technicians have opened hundreds of Trane systems in this city, from early XL90 gas furnaces to XC80 communicating units. Every job gets a written price before work starts, and every duct run is photographed before and after. Call (806) 606-6902 for a free estimate.
Why Denver Residents Choose Us for Trane Service
We’re not a manufacturer service arm. We’re an independent Trane repair and cleaning provider, which means we answer to you, not a corporate warranty department. Our owner, Tomas Reyes, cut his teeth in buildings old enough that the ductwork hadn’t been touched in decades, then built CleanRun on a straightforward sequence: camera inspection first, written scope second, and no work until you’ve seen what’s inside your ducts. That approach matters for Trane equipment because these systems hide problems well. A Trane XC80 can report normal operation through the thermostat while a 3-inch debris build-up chokes the return plenum. We find it, we document it, and we price the fix before a single panel comes off.
For Trane owners in Denver, that documentation is the whole point. You get a written photo record of every duct run, inside every return, before and after. You get Haven Standard Clause 1: a written price before any work begins, every time. And you get the 365-Day Done Right Promise, in writing, not as a marketing line.
Common Trane Air Duct Cleaning Problems We Solve in Denver
- Wildfire smoke odor trapped in the Trane secondary heat exchanger gasket. The high-efficiency Trane secondary heat exchanger uses a fibrous gasket that absorbs smoke oils during events like the December 2021 Marshall Fire. Standard vacuuming won’t touch that tar-like residue. We pull the blower assembly, degrease the affected surfaces, and run an encapsulant fog through the return duct only.
- Trane variable-speed blower motors throwing intermittent ECM speed codes. Denver’s persistent dryness keeps ultrafine dust airborne for weeks. On XV80 and XV95 variable-speed units, that dust loads the blower wheel unevenly over time. The motor ramps, the wheel wobbles, and the board logs a speed fault. Cleaning and rebalancing the wheel usually settles it.
- Trane communicating systems reporting normal CFM while the home stays stuffy. Lint and soot accumulate on the indoor evaporator coil, clipping actual airflow below what the ComfortLink II or XL824 thermostat reports. The system thinks it’s fine. You feel the difference in the living room. We clean the coil and verify real airflow against reported airflow.
- Dried-out Trane OEM media filter cabinet gaskets letting unfiltered air bypass the filter. Denver’s low humidity curls those gaskets within a few seasons. Return air slips around the filter, dusts the evaporator coil, and loads your supply ducts with particulate. We replace the gasket or the cabinet seal, then clean downstream.
- Original galvanized ducts in 1950s-1970s Denver ranch homes paired with modern Trane furnaces. Those Harvey Park and Barnum ranches run original sheet-metal ductwork through unfinished basements, now 50-70 years old. When a newer Trane high-efficiency furnace pushes air through corroded, leaking returns, it pulls basement dust, insulation fibers, and decades of accumulated debris into the system. We clean, seal, and document every run.
BeforeAfterTrane Service in Denver: What Local Conditions Mean for Your Equipment
The December 2021 Marshall Fire pushed a hard, oily smoke plume into western Denver suburbs like Lakewood and Arvada, and only homes whose Trane furnace ran during the event got that smoke pulled deep into the return plenum. That created a block-by-block pattern you can feel standing in the basement: on one street, a Trane XL80 smells faintly of campfire every time the heat kicks on. Two blocks over, nothing. We’ve mapped that pattern on hundreds of Trane systems since the fire, because the difference comes down to whether the blower was circulating when the plume moved through. A homeowner in Lakewood who swapped filters twice but never addressed the smoke film inside the return boot called us a year later, confused about why the odor “came back” with heating season. It never left. The return duct and blower wheel were still carrying it.
We opened a Trane XL80 in the Harvey Park neighborhood a few weeks after the Marshall Fire, and the return duct off the unfinished basement was layered with a grey, slightly tacky smoke film. The homeowner had swapped the filter twice but the odor stuck. We pulled the blower assembly, degreased the blower wheel and the return boot, then ran an encapsulant fog through the return duct only. Four days later the cycle showed normal static pressure and the smell was gone. That’s the fix Denver Trane owners actually need, not a coupon cleaning.
Trane Models & Products We Service in Denver
We service the full Trane residential line in Denver, including the XL80 and XL90 gas furnace series, XR13 and XR15 air conditioner and heat pump lines, XV80 and XV95 variable-speed gas furnaces, and ComfortLink II and XL824 communicating control systems. For repairs, we always price genuine Trane OEM parts first: ignitors, flame sensors, pressure switches, control boards. Trane communicating systems are picky about resistance values, and aftermarket electronics cause more problems than they solve. For non-critical duct sealing and flex duct repair, we use commercial-grade aftermarket mastic and UL-listed replacement duct, and we tell you straight when a 20-year-old Trane furnace isn’t worth the repair cost.
Trane Service Pricing in Denver
Whole-system Air Duct Cleaning in Denver typically runs $300 to $550 depending on home size, number of returns, and what the camera finds. Evaporator coil cleaning adds $150 to $250 when the coil is accessible. Smoke odor remediation, like what we performed on Trane systems across Lakewood and Arvada after the Marshall Fire, runs $400 to $800 depending on how deep the smoke oils penetrated and whether an encapsulant fog is required. A video inspection with written findings is $95, credited toward the job if we do the work. We never quote per-vent pricing, and there’s no coupon game. You get one written price for the whole system before work begins, under Haven Standard Clause 1. Call (806) 606-6902 for an exact quote; estimates are free, and there’s no pressure to book.
Serving Denver, CO - Our Local Coverage Area
We’re based in the Denver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Denver
The smoke odor is embedded in your return duct, blower wheel, or the secondary heat exchanger’s fibrous gasket, not in the filter. Standard filter changes cannot remove that smoke film. If your Trane furnace ran during the December 2021 Marshall Fire, the return plenum likely pulled oily smoke particulate deep into the system. The fix is degreasing the affected surfaces and running an encapsulant fog through the return duct. Call (806) 606-6902 to schedule an inspection and get a written price.
Yes, they can. Trane XV80 and XV95 variable-speed blowers ramp over many minutes, which means longer run cycles and more sustained airflow through the return side. In Denver’s dry, dust-heavy air, that translates to more particulate loading on the blower wheel over a season. Single-speed units cycle less and often accumulate dust in different places. The trade-off is comfort versus maintenance frequency, and a variable-speed system in Denver needs more regular inspection of the blower wheel.
Yes. Smoke oils are ultrafine and bypass standard media filters, especially if the filter cabinet gasket has dried out from Denver’s low humidity. Those oils deposit on the blower motor windings and blower wheel, which can throw a variable-speed motor out of balance and trigger intermittent ECM speed codes. The filter looking clean doesn’t mean the motor isn’t carrying smoke residue. A camera inspection of the blower assembly will show it.
No, not for a standard cleaning. Trane ComfortLink II and XL824 thermostats store configuration profiles that survive power cycling and routine maintenance. However, if we perform a full blower removal, evaporator coil cleaning, or any repair that disconnects the communicating harness, we re-run the system’s self-test to confirm the thermostat sees every component correctly. We document that verification in your photo record.
Yes, it’s a common problem in Denver. Original galvanized ductwork in 1950s through 1970s ranch homes was never sealed the way modern systems require. A newer Trane high-efficiency furnace operating at higher static pressure against leaking, corroded 60-year-old returns will pull basement dust and insulation into the system, and your supply ducts will load with particulate faster than a modern sealed duct design. The good news is we can seal and clean those original runs, and the photo record will show you exactly what was inside and what changed. Call (806) 606-6902 for a free estimate.
Service Areas Near Denver
We serve Denver and surrounding areas from our central location. Our Denver technicians regularly work in neighborhoods including Harvey Park, Barnum, Westwood, Montbello, and Central Park. Need Trane service elsewhere? We also cover Trane sales & service inquiries across the region, and provide Denver service area coverage throughout the metro. For Trane owners in border regions, see Trane service in El Paso and Trane service in Detroit.
Book Your Trane Service in Denver Today
If your Trane system has been through a Denver wildfire season, a dusty spring, or decades of deferred cleaning, the camera will show you what’s inside. The photo tells you what’s in there. Everything else is just paperwork. Call (806) 606-6902 for a free estimate and a written price before any work starts.
Written by Tomas Reyes, Owner & Lead Technician at CleanRun Air Duct Cleaning, serving Denver since 2013.