Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterCarrier Air Duct Cleaning in Austin, NY | CleanRun Air Duct Cleaning
Air Duct Cleaning - Austin for Carrier systems typically runs $450-$900 for a full system, and the work usually takes 4-6 hours. We’re CleanRun Air Duct Cleaning, an independent Carrier service provider, not a manufacturer affiliate - and the reason our Austin work differs from anyone else’s is simple: we photograph every duct run before and after, and we write the price down before a single panel comes off. Call (806) 606-6902 for a written estimate on your Carrier system, whether it’s an Infinity air handler or a 1980s WeatherMaker still chugging through cedar season.
Why Austin Residents Choose Us for Carrier Service
Our team has spent over a decade working exclusively on Carrier ducted systems across Austin HVAC Cleaning - from early-2000s Infinity air handlers to aging flex duct runs in the 1970s ranch homes that fill Allandale, Crestview, and Brentwood. That narrow focus means we can identify Carrier-specific duct leakage, liner breakdown, and coil fouling patterns in the first ten minutes of a walkthrough. No authorization needed to know exactly where these systems fail in Austin’s attic heat.
Tomas Reyes, our owner and lead technician, grew up in a Queens building old enough that the ductwork hadn’t been touched since the Carter administration. He completed HVAC coursework at Queensborough Community College before spending years on residential and commercial duct systems across all five boroughs. Today he runs CleanRun with a straightforward approach: camera inspection first, written scope second. No work starts until you’ve seen exactly what’s inside your ducts. Carrier sales & service is what we do, but the photo record is what we hand you.
Every Austin job concludes with a Documented Photo Record of every duct run - inside, before and after - delivered as a standard deliverable, not an upsell. We’ve operated this way since 2013, across more than 52,000 homes, every one with a written price before work started.
Common Carrier Air Duct Cleaning Problems We Solve in Austin
- Flex duct liner degradation from attic heat. Austin attics routinely exceed 140-150°F for six months a year. That heat bakes the inner liner of flex duct until it cracks and sheds fiberglass particles directly into your Carrier air handler. We see this constantly on WeatherMaker and early Infinity systems in Allandale and Crestview, where original 1980s and 1990s ductwork is now 30-50 years old.
- Supply and return duct leakage at plenum connections. Dried mastic and separated takeoffs create gaps where conditioned air escapes into the attic. On Carrier Infinity systems with variable-speed blowers, that leakage causes static pressure spikes that trigger alerts on the thermostat. A cleaning that ignores these gaps is half a job.
- Evaporator coil fouling from cedar pollen and construction dust. Austin’s mountain cedar pollen counts exceed 20,000-30,000 grains per cubic meter every December through February. When degraded duct liners stop filtering, those microscopic grains hit the evaporator coil and choke airflow. Coil cleaning on a Carrier Performance system in Brentwood isn’t optional after a heavy cedar season - it’s the difference between a blower running efficiently and one grinding against restriction.
- Crushed or collapsed flex duct runs in unconditioned attics. Decades of 140°F+ attic exposure destroy the wire coil and jacket on older flex runs. Technicians working Central Austin attics in Allandale, Brentwood, and Cherrywood frequently find partially collapsed or fully detached runs - meaning a quoted cleaning job regularly converts into a duct repair or replacement scope before the vacuum truck even starts.
- Filter bypass from improper media fit. Carrier air handlers are particular about filter dimensions. A slightly undersized aftermarket filter lets debris slip around the frame and straight into the blower. We stock OEM-spec Carrier filter media for Infinity, Performance, and Comfort series systems so the seal is right the first time.
BeforeAfterCarrier Service in Austin: What Local Conditions Mean for Your Equipment
Here’s what makes Austin genuinely different from Dallas, Houston, or anywhere else in Texas: mountain cedar pollen counts exceed 20,000 grains per cubic meter every December through February, and those microscopic grains lodge inside duct liners that have been baked brittle by 140°F attic heat. No other major Texas metro combines that pollen blast with that attic temperature profile. What that means for Carrier owners is specific: a duct cleaning here regularly turns into liner replacement instead of just a vacuum job. The pollen doesn’t sit on the surface - it works into the fiberglass liner itself, where a negative-pressure extraction can’t fully reach it.
Last February we pulled a vacuum truck up to a 1980s ranch on Justin Lane in Brentwood. The homeowner’s Carrier WeatherMaker had run nonstop through cedar season. Our tech found the return flex in the attic had lost its inner liner down to the wire coil, so every pulse of the blower was sucking hot attic air and cedar pollen straight into the air handler. We replaced the entire return run with insulated R-8 flex, resealed the plenum with mastic, then cleaned the evaporator coil before the blower finally hit its target static pressure. That’s the Austin pattern: the cleaning exposes the real problem, and the real problem is usually the ductwork, not the dirt.
Carrier Models & Products We Service in Austin
We work on the full Carrier ducted lineup: Infinity series with variable-speed air handlers, Performance series mid-tier splits, Comfort series entry-level systems, and WeatherMaker legacy units from the 1990s and 2000s that still run throughout Central Austin. Our parts approach is OEM-spec - Carrier replacement flex duct, mastic sealant, and filter media - because Infinity blowers are sensitive to airflow restriction from inferior liner material. We stock common OEM-spec components locally for fast Austin turnaround, which means a flex duct replacement or plenum reseal on a WeatherMaker in Cherrywood doesn’t wait on a parts shipment from out of state.
Carrier Service Pricing in Austin
Carrier air duct cleaning in Austin runs $450-$900 for a full system, with the spread driven by square footage, number of duct runs, and how much liner degradation or coil fouling the camera finds. Flex duct repair adds $200-$500 per run depending on length and access. Evaporator coil cleaning on Carrier Performance or Infinity systems runs $150-$350 as a standalone scope. Duct sealing at plenum connections and takeoffs runs $300-$600 depending on how many joints need mastic work.
Every estimate includes a camera inspection, a written line-item scope, and a flat price per system agreed before work starts - Haven Standard Clause 1. No per-vent pricing, no hour meter running while the truck sits in your driveway. Call (806) 606-6902 for an exact quote on your Austin home; estimates are free and include the photo record whether or not you book.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Carrier Air Duct Cleaning in Austin
Cedar pollen doesn’t just settle in your ducts - it works into the fiberglass liner of aging flex duct, especially after 140°F attic heat has made that liner brittle. So even a freshly cleaned system re-contaminates quickly during the December-February pollen explosion. The fix in Allandale homes with 30-50-year-old ductwork is usually liner repair or replacement first, cleaning second. Call (806) 606-6902 and we’ll camera-scope your runs and show you what’s actually in there before any work is quoted.
High static pressure alerts on Infinity thermostats are almost always from duct leakage or crushed flex runs, not from cleaning equipment. The variable-speed blower ramps up to maintain airflow, and when return or supply ductwork has separated takeoffs, dried mastic, or collapsed liners, the blower registers rising restriction and flags it. If a previous cleaning didn’t photograph the ductwork, you’re guessing. We camera-inspect and measure static pressure before and after every Infinity job in Austin.
Yes. On most Crestview ranch homes with standard attic or closet air handlers, we can access the coil through the service panel, photograph the condition, and clean it in place with professional-grade equipment from Rotobrush or Abatement Technologies. If the coil is so fouled that in-place cleaning won’t restore airflow, we’ll show you the photo and quote removal separately - not as a surprise upcharge. Call (806) 606-6902 for a written estimate.
Mastic-sealed duct connections in a Brentwood attic typically hold for 10-15 years before Austin’s attic heat dries them enough to crack and separate. If your home’s ductwork was sealed when installed in the 1980s or 1990s and hasn’t been touched since, it’s overdue. We re-inspect seals as part of every cleaning and quote resealing separately - written price before work starts, no exceptions.
Usually not. A 40-year-old flex duct run in a Cherrywood attic has spent four decades in 140°F+ heat, and the inner liner is likely cracked, shedding, or gone entirely. Cleaning debris out of a liner that’s already failing is temporary. For older systems with multiple degraded runs, we honestly recommend full duct replacement over continued patching - it often costs less than repeated clean-and-repair cycles over two or three cedar seasons. Call (806) 606-6902 and we’ll camera-scope the runs and put both options in writing.
Service Areas Near Austin
CleanRun serves the broader metro from our Austin base, including the inner-ring neighborhoods of Allandale, Brentwood, Crestview, and Cherrywood, plus surrounding communities across the Hill Country. We also run Carrier service in Jacksonville and Carrier service in San Francisco for homeowners who split time between markets. For Austin and nearby towns, our Austin service area page maps the full coverage radius.
Book Your Carrier Service in Austin Today
Written price before any work starts. Camera record of every duct run before and after. The 365-Day Done Right Promise in writing. Call (806) 606-6902 and Tomas or a member of the CleanRun crew will walk you through what your Carrier system in Austin actually needs - not what someone on the phone guesses it needs.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Austin since 2013.