Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Air Duct Cleaning in Bristol, CT
Dryer vent cleaning in Bristol typically costs $120-$240 and most jobs are completed in under two hours. The city’s pre-1960 housing stock and long, cold winters mean lint accumulation is heavier here than in newer Connecticut suburbs. Call (806) 606-6902 for a written price before any work starts.
Why Bristol Homes Are Different
Bristol’s industrial peak left something most homeowners don’t think about until a problem shows up: a dense belt of worker housing built between the 1880s and 1950s with ductwork that was never designed for modern forced-air systems. Many of the Cape Cods, two-families, and compact colonials across Federal Hill, Forestville, and the downtown valley originally ran on gravity furnaces, often called octopus furnaces because of the sprawling round ducts radiating from a central unit. When those systems were converted to forced air decades later, the original ductwork was usually adapted rather than replaced. That means cloth-taped joints that have long since dried out and failed, mismatched duct sizing that throws off airflow room to room, and debris loads that have been accumulating since long before anyone reading this bought their home.
The climate compounds it. Bristol sits inland and at higher elevation than coastal Connecticut, so heating systems run harder and longer each winter than they do in Hartford or New Haven. That longer runtime pulls more air through ducts that are already leaky and lined with old dust. Add the Pequabuck River corridor running through the downtown valley, and you get localized humidity that encourages mold growth inside ductwork in low-lying neighborhoods. A duct cleaning job in Bristol isn’t the same job as one in a 2005 colonial in Farmington.
Our Main Bristol Services
Most Bristol homeowners call us first for one of two things: a full air duct cleaning to address years of accumulated debris in aging ductwork, or an HVAC cleaning to restore system efficiency and airflow.
Air Duct Cleaning in Bristol
Bristol’s 70-100+ year old housing stock means many duct systems have never been professionally cleaned, and the debris isn’t just dust. We find plaster chunks from old renovations, cloth tape fragments that have fallen into the airflow, and in Forestville two- and three-family rentals, decades of lint and hair built up in shared trunk lines. The camera doesn’t lie, and neither do we. Air Duct Cleaning in Bristol includes a documented photo record of every run, before and after.

HVAC Cleaning in Bristol
Older Bristol furnaces and air handlers collect a specific mix of fine dust and debris that newer systems don’t see. The longer winter runtime means blower wheels, coils, and plenums need attention more often than in coastal towns. HVAC Cleaning in Bristol covers the full system, not just the visible register openings.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterDryer Vent Cleaning in Bristol

Dryer vent cleaning in Bristol is one of the most overlooked maintenance jobs in older homes, and it’s also one of the most dangerous to ignore. Lint buildup inside a vent doesn’t just make the dryer work harder. It’s a fire hazard. In pre-1960 Bristol homes, vent runs are often long, narrow, and made of aging materials, with elbows and joints that collect lint faster than modern straight runs. We’ve pulled handfuls of compacted lint from runs in Forestville and Federal Hill that hadn’t been opened in years. The climate matters too: Bristol’s longer heating season means dryers run more cycles per week, and more cycles means faster lint accumulation. For a full look at our process, see Dryer Vent Cleaning.
Dryer Vent Inspection
Signs you need it
Clothes take more than one cycle to dry, the dryer feels hot to the touch, or you can’t recall the last time anyone looked inside the vent.
What it costs in Bristol
A dryer vent inspection in Bristol typically runs $80-$120, and we document the condition with photos.
How we do it
We run a camera through the full vent run, measure airflow at the exterior exit, and give you a written report with photos before quoting any cleaning.
Lint Removal
Signs you need it
Visible lint at the exterior vent, a burning smell when the dryer runs, or the dryer shuts off mid-cycle from overheating.
What it costs in Bristol
Lint removal from a standard residential dryer vent in Bristol typically costs $120-$240, depending on run length and how compacted the lint is.
How we do it
We use a Rotobrush or Nikro negative-pressure system with rotating brushes, then verify the full run with a camera before showing you the before-and-after record.
Vent Rerouting
Signs you need it
Your current vent run is longer than 25 feet, has more than two elbows, or emerges somewhere unsafe like a crawlspace, attic, or wall cavity.
What it costs in Bristol
Dryer vent rerouting in Bristol ranges from $180-$350 depending on where the new exit point goes.
How we do it
We map the shortest safe path to an exterior wall, install rigid metal duct with proper supports, seal all joints, and photograph the new run end to end.
Bird Guard Installation
Signs you need it
You hear chirping or rustling at the exterior vent, see nesting material poking out, or have had birds enter through the opening.
What it costs in Bristol
A bird guard for a dryer vent in Bristol typically costs $40-$90 installed.
How we do it
We remove any nesting material, clean the vent thoroughly, and install a metal guard that keeps birds out without restricting airflow.
What Dryer Vent Cleaning Costs in Bristol
| Item | Typical range in Bristol |
|---|---|
| Dryer vent inspection | $80-$120 |
| Standard lint removal | $120-$240 |
| Vent rerouting | $180-$350 |
| Bird guard installation | $40-$90 |
How often should dryer vents be cleaned in Bristol?
Every year for most Bristol homes, and every 6 months if the vent run is long, has multiple elbows, or serves a two-family with heavy laundry use. Forestville rentals with shared vent runs should be cleaned at least annually.
Does a clogged dryer vent really cause fires?
Yes. Lint is highly flammable, and when airflow is restricted the dryer’s heating element runs hotter. Bristol’s older vent runs with failed joints and accumulated debris are a higher-risk profile than new straight runs. Call (806) 606-6902 for a documented inspection.
Duct Repair & Sealing in Bristol

Duct repair and sealing in Bristol addresses a problem that most homeowners don’t know they have until they see the photos. The city’s gravity-furnace conversions left behind joints sealed with cloth tape that has dried, cracked, and fallen away over decades, allowing heated or cooled air to escape into wall cavities and attics. In Bristol’s older two-family homes, a single trunk line often serves multiple units, so a leak in one section affects the airflow and air quality in every apartment on that system. We document every repaired section with before-and-after photos so you can see exactly what was done. Our Duct Repair & Sealing service covers the full range of issues.
Duct Sealing
Signs you need it
Rooms at the far end of the house never reach the same temperature as the rest of the home, or your energy bills climb while comfort stays the same.
What it costs in Bristol
Whole-system duct sealing in Bristol typically runs $400-$1,200 depending on the number of accessible joints and runs.
How we do it
We locate leaks with a visual inspection and smoke pencil, then seal joints with mastic sealant, not cloth tape, and photograph every sealed joint.
Flex Duct Repair
Signs you need it
You see crushed, kinked, or sagging flex duct in your basement or attic, or feel weak airflow at specific registers.
What it costs in Bristol
Flex duct repair in Bristol ranges from $200-$550 per section, depending on access and run length.
How we do it
We cut out the damaged section, install new insulated flex duct with proper supports, seal both connections with mastic, and photograph the finished work.
Metal Duct Repair
Signs you need it
You see rust, separated seams, or visible holes in exposed metal ductwork, often in older Bristol basements.
What it costs in Bristol
Metal duct repair in Bristol typically runs $250-$700 per section depending on the extent of the damage.
How we do it
We cut out the damaged metal, fabricate and install a replacement section, seal the seams, and document the repair with photos.
What Duct Repair & Sealing Costs in Bristol
| Item | Typical range in Bristol |
|---|---|
| Whole-system duct sealing | $400-$1,200 |
| Flex duct repair | $200-$550 per section |
| Metal duct repair | $250-$700 per section |
How do I know if my ducts are leaking?
Uneven room temperatures, high heating bills, and dust accumulating quickly after cleaning all point to leaky ducts. In Bristol gravity-furnace conversions, the cloth-taped joints are the usual culprits, and we document every leak with photos.
Is sealing ducts worth the cost?
For most Bristol homes, yes. Sealing leaks means the air you paid to heat or cool actually reaches your living space instead of an attic or wall cavity. Call (806) 606-6902 for a written assessment and exact price.
Air Quality & Sanitizing in Bristol

Air quality and sanitizing in Bristol is about more than dust. The Pequabuck River corridor creates low-lying humidity pockets in the downtown valley, and that moisture inside older ductwork promotes mold growth that standard cleaning alone won’t resolve. Bristol’s tight worker housing from the industrial era often has limited ventilation, so whatever is growing inside the ducts ends up cycling through the living space day after day. We treat the cause, not just the symptom, and every step is documented. See Air Quality & Sanitizing for the full scope of treatments available.
Mold Treatment
Signs you need it
Musty smell from the registers, visible mold growth on or around vent openings, or family members with allergy symptoms that worsen at home.
What it costs in Bristol
Mold treatment for ductwork in Bristol typically ranges from $450-$1,200 depending on the affected area and severity.
How we do it
We identify the affected sections with a camera, contain the area, apply EPA-registered antimicrobial treatment, and document the entire process with photos.
UV Light Installation
Signs you need it
Recurring mold or bacteria issues, or a household with respiratory conditions that would benefit from continuous air treatment.
What it costs in Bristol
A UV light system installation in Bristol typically costs $550-$900 installed.
How we do it
We mount a Honeywell UV system at the air handler, wire it to operate when the system runs, and verify operation before documenting the installation.
Odor Removal
Signs you need it
Persistent smell from the ducts that isn’t resolved by cleaning, often from previous occupants, pets, or a past mold issue.
What it costs in Bristol
Duct odor removal in Bristol ranges from $250-$600 depending on the treatment method and system size.
How we do it
We clean the duct runs first, then apply an odor-neutralizing treatment through the full system and verify the result with a follow-up walkthrough.
What Air Quality & Sanitizing Costs in Bristol
| Item | Typical range in Bristol |
|---|---|
| Mold treatment for ductwork | $450-$1,200 |
| UV light installation | $550-$900 |
| Odor removal | $250-$600 |
Is mold in my ducts dangerous?
Mold spores circulating through your ducts expose everyone in the home to them, especially in Bristol’s low-lying Pequabuck corridor where humidity promotes regrowth. Treatment should address both the mold and the moisture source. Call (806) 606-6902 for a documented assessment.
Will UV lights really improve air quality?
A properly installed UV system at the air handler can reduce bacteria and mold growth on the coil and in nearby ductwork. It’s not a substitute for cleaning, but it helps keep things from coming back in Bristol’s humid valley areas.
Brands We Service in Bristol

Our crews in Bristol work on systems from all major manufacturers, and we stock common parts locally for Guardsman, Rotobrush, Nikro, and Honeywell equipment. Most parts are on hand or available same week. See our brands for more on what we work with.
Pricing for Air Duct Cleaning in Bristol, CT
| Service | Typical range in Bristol |
|---|---|
| Dryer vent inspection | $80-$120 |
| Standard lint removal | $120-$240 |
| Vent rerouting | $180-$350 |
| Bird guard installation | $40-$90 |
| Whole-system duct sealing | $400-$1,200 |
| Flex duct repair | $200-$550 per section |
| Metal duct repair | $250-$700 per section |
| Mold treatment for ductwork | $450-$1,200 |
| UV light installation | $550-$900 |
| Odor removal | $250-$600 |
What pushes a Bristol job toward the higher end of these ranges is usually access and condition. Gravity-furnace conversions with failed cloth tape, long vent runs with multiple elbows, and ductwork in tight crawlspaces all add labor. Every price we give is written before any work starts, under Haven Standard Clause 1, and never changes after the fact.
Neighborhoods We Serve in Bristol

We cover Bristol end to end, including the older housing clusters where ductwork conditions vary block by block. Typical response for a scheduled estimate anywhere in the city is within a few business days.
- Federal Hill
- Forestville
- Downtown Bristol
- Chippens Hill
- Edgewood
Service Area - Cities Near Bristol
CleanRun also serves homeowners in the neighboring communities of New Britain, CT, Newington, CT, West Hartford, CT, and Waterbury, CT. Scheduling is coordinated from the brand’s Hartford office, and crews serve Bristol locally.
Serving Bristol, CT - Our Local Coverage Area

We’re based in the Bristol area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Bristol
Scheduled estimates are typically available within a few business days across Bristol. For dryer vent issues that pose an immediate fire risk, call (806) 606-6902 and we’ll prioritize your appointment.
Routine duct cleaning, dryer vent cleaning, and most duct sealing work does not require a permit in Bristol. If a repair involves structural changes or new exhaust routing, we’ll tell you during the estimate and handle the paperwork as needed.
Yes. We clean and repair ductwork in two- and three-family homes throughout Bristol, including shared trunk line systems in Forestville where multiple units draw from a single run. Each job gets a written price before work starts.
If you’re ready to see what’s actually inside your ductwork, call CleanRun Air Duct Cleaning at (806) 606-6902 for a free estimate. Every Bristol job includes a written price before work begins and a documented photo record when we’re done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bristol Customers Say
"The before and after photographs of each run are the reason I used them. You cannot argue with what came out of the return."
- Marguerite O."Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B."The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M.




Before
After
Before
After