Air Duct Cleaning in Moore - One Flat Price, Before-and-After Photos

Air Duct Cleaning in Moore, OK

Dryer vent cleaning in Moore, OK typically runs $89-$189 and takes under two hours when the vent run is accessible from the exterior wall. What makes Moore jobs different is the housing stock: thousands of post-2013 rebuilt homes with flex duct in attic chases, and thousands more pre-1999 ranches on original galvanized systems. Both trap red-clay dust and storm debris in ways a filter swap never touches. Call (806) 606-6902 for a written price before any work starts.

Call (806) 606-6902

Why Moore Homes Are Different

Moore is ground zero for the May 20, 2013 EF5 tornado that destroyed or damaged over 12,000 homes, triggering one of the largest single-city residential rebuilding surges in U.S. history. The rebuilt neighborhoods, many using flex duct on slab-on-grade construction assembled rapidly by competing crews, were largely never professionally cleaned post-construction. That left a decade-old layer of drywall compound dust, blown-insulation fragments, and cellulose baked into duct liners. Homes adjacent to the tornado path that structurally survived also had duct systems infiltrated by the storm’s massive pressure differentials and airborne debris, contamination that routine filter changes never reached.

Moore’s housing stock is split between pre-1999 ranch-style suburban homes from the OKC south-metro expansion still on their original duct systems, and large swaths of post-2013 rebuilt single-family homes using flexible duct in attic chases. The older surviving homes commonly have 25-40 year-old galvanized or fiberglass-lined ducts running through unconditioned attic spaces that bake at 140°F+ each summer. The rebuilt homes face a different problem: flex duct that sags, gaps, and accumulates debris in Oklahoma’s extreme attic heat. The region’s relentless south winds carry red-clay dust and agricultural particulates year-round, and systems running nearly continuously through 100°F+ summers pull that material deep into duct interiors. In the rebuilt corridor around Plaza Towers Elementary and the neighborhoods south of SW 4th Street reconstructed after 2013, many owners have never had ducts cleaned because the homes were “brand new.” A decade of Oklahoma dust seasons in flex duct installed under post-disaster time pressure is exactly the scenario that drives the worst contamination readings technicians see anywhere in the OKC metro.

Our Main Moore Services

Most Moore homeowners call us first for these two jobs, both of which hit differently here because of the post-2013 rebuild mix and the red-clay dust load.

Air Duct Cleaning in Moore

Air duct cleaning in Moore means pulling years of red-clay dust, construction debris, and storm particulate out of the full duct run, from the plenum to the registers. In rebuilt homes, we routinely find drywall compound dust and blown-insulation fragments that have been recirculating since 2013. In older ranches, we document galvanized ducts that haven’t been opened in decades. Every job includes a Documented Photo Record of every duct run, before and after, so you can see exactly what was removed. That’s the standard we’ve held since our first job in 2013. Learn more about Air Duct Cleaning in Moore.

HVAC Cleaning in Moore

HVAC cleaning in Moore goes beyond the ducts to the blower motor, evaporator coil, and drain pan, all of which accumulate the same fine red-clay dust that settles into the duct liner. Moore’s systems run almost continuously from May through September, pulling south-wind particulates across the coil and into the blower assembly. In post-2013 rebuilt homes, we also find construction dust that has baked onto the coil fins, cutting efficiency. We photograph the components before and after so you can see the difference between a documented cleaning and vacuum noise. Details on HVAC Cleaning in Moore.

Before

After

Dryer Vent Cleaning in Moore

Dryer vent cleaning in Moore means clearing the length of the vent run, from the dryer connection to the exterior termination, of lint, red-clay dust, and sometimes bird nesting that blocks airflow. In Moore’s rebuilt homes, flex vent runs through attic chases are prone to sagging and kinking, which traps lint and creates choke points. In older ranches, we see vent runs that exit through the roof, accumulating debris faster than wall-vented systems. Every job ends with a photo record of the vent interior before and after. This is core work for us, and we document it like all our Dryer Vent Cleaning, with a written price agreed before the first panel comes off.

Dryer Vent Inspection

Signs you need it

If clothes take two cycles to dry, the exterior vent flap doesn’t open fully when the dryer runs, or you notice a hot, musty smell in the laundry room, the vent run likely has a restriction.

What it costs in Moore

A camera inspection of the dryer vent run in Moore typically runs $59-$99, and that cost is credited toward cleaning if you proceed.

How we do it

We run a flexible borescope camera from the dryer connection through the full vent run to the exterior termination, documenting every bend, restriction, and gap with a photo record before quoting a written price.

Lint Removal

Signs you need it

Lint builds on the vent walls and at every bend; when the duct interior drops to half its diameter or less, airflow falls, dry times stretch, and the risk of a vent fire climbs.

What it costs in Moore

Full lint removal from a standard 10-15 foot residential dryer vent run in Moore typically costs $89-$189, depending on run length and accessibility.

How we do it

We use a motorized rotating brush with HEPA-filtered negative-pressure extraction to pull lint and debris out of the run, working from the exterior vent back toward the dryer connection, then photograph the clean run.

Vent Rerouting

Signs you need it

Older Moore homes often vent dryers through the roof, a configuration that traps lint faster and is harder to clean than a wall-vented run.

What it costs in Moore

Rerouting a dryer vent from roof termination to an exterior wall in Moore typically runs $220-$380, including the new termination fitting and sealing.

How we do it

We plan the shortest straight run through the exterior wall, install rigid metal duct (no flex in the new run), seal the old roof penetration, and photograph the completed installation.

Bird Guard Installation

Signs you need it

If you hear scratching near the vent opening, see nesting material protruding from the exterior flap, or the flap won’t close fully, birds have likely entered the vent run.

What it costs in Moore

A galvanized or stainless steel bird guard installed on an existing dryer vent termination in Moore typically costs $45-$95, including removal of any existing nesting debris.

How we do it

We clear the vent of nesting material, photograph the obstruction, then install a screened guard over the exterior termination that keeps birds out while allowing full airflow.

What Dryer Vent Cleaning Costs in Moore

How often should a dryer vent be cleaned in Moore?

Every 12 to 18 months for a household that runs three or more loads per week. Moore’s red-clay dust and south winds push more fine particulate into vent runs than the national average, so annual cleaning is reasonable here. Call (806) 606-6902 for a written quote.

Why is my dryer taking longer to dry clothes in Moore?

It’s usually a restricted vent run, often made worse by sagging flex duct in attic chases of post-2013 rebuilt homes. The restriction holds moisture and heat in the drum. Call (806) 606-6902 and we’ll camera the run and document what’s there.

Duct Repair & Sealing in Moore

Duct repair and sealing in Moore addresses two local failure patterns: post-2013 flex duct that has sagged, gapped, or pulled apart at the connections, and pre-1999 galvanized ducts with failed tape, rusted seams, or loose joints in 140°F attics. Both leak conditioned air, pull dust from unconditioned spaces, and drive up cooling costs through Oklahoma’s long summer. Our Duct Repair & Sealing work is documented run by run, with a written price before any work starts and a photo record of every repair when the job is done.

Duct Sealing

Signs you need it

Rooms that never reach the thermostat setting, visible gaps at duct joints in the attic, or dust accumulation around registers despite regular filter changes all point to air leaks.

What it costs in Moore

Sealing accessible duct joints and seams with mastic and foil tape in Moore typically runs $180-$420, depending on the number of joints and the duct configuration.

How we do it

We locate every accessible joint and seam, clean the surface, apply mastic sealant with fiberglass mesh tape at each joint, and photograph each sealed section before closing access.

Flex Duct Repair

Signs you need it

Kinked, collapsed, or disconnected flex runs in the attic, often visible as sagging lines, cause much of the uneven cooling Moore homeowners report in post-2013 rebuilt homes.

What it costs in Moore

Replacing a damaged section of flex duct, including a new connector and sealing, typically costs $120-$260 per run in Moore, depending on length and accessibility.

How we do it

We pull the damaged section, cut a new run to the correct length, connect with properly sized collars, seal both ends with mastic, and support the run with strapping to prevent future sag.

Mastic Sealant

Signs you need it

Dried, cracked tape at duct joints, gaps where the duct meets the plenum, or visible dust streaks at seams indicate failed sealing that mastic will correct permanently.

What it costs in Moore

A full mastic sealing pass over all exposed duct joints in a typical Moore attic typically costs $220-$480, including cleaning and surface preparation.

How we do it

We strip old tape, abrade the surface, apply mastic sealant to every exposed joint with a brush, and photograph the sealed joints before and after to document coverage.

What Duct Repair & Sealing Costs in Moore

Is duct sealing worth it in Moore’s climate?

Yes. Moore’s attics hit 140°F in summer, and air leaking from duct joints pulls hot, dusty attic air into the system while cooling the attic instead of the house. Sealing pays back in comfort and energy use. Call (806) 606-6902 for a written quote.

How do I know the ducts were actually sealed?

We photograph every sealed joint before and after, and deliver that photo record with the job documentation. You can see the mastic on every seam, not just take our word for it. Call (806) 606-6902 for a written quote.

Air Quality & Sanitizing in Moore

Air quality and sanitizing in Moore targets what accumulates inside duct systems that mechanical cleaning alone won’t address: mold spores in humid attic ducting, bacteria on the evaporator coil, and persistent odor from storm infiltration or household sources. Moore’s rebuilt homes often have construction dust and post-disaster particulates baked into flex duct liners, while older homes carry years of red-clay dust and biological loading. Our Air Quality & Sanitizing service applies EPA-registered antimicrobials or installs UV systems, with before and after documentation of every treated surface.

Mold Treatment

Signs you need it

Musty odor that comes from the registers when the blower runs, visible growth on duct surfaces or the coil, or a home with a history of roof leaks or storm water intrusion warrants inspection.

What it costs in Moore

Surface mold treatment of the accessible duct interior and evaporator coil in Moore typically runs $300-$650, depending on duct length and coil accessibility.

How we do it

We inspect with a camera, then apply an EPA-registered antimicrobial to affected surfaces using a fogger or direct application, photographing the treatment area before and after.

Bacteria Sanitizing

Signs you need it

A dirty-sock smell from the registers in cooling season often indicates bacteria and biofilm on the evaporator coil, common in homes where the system runs constantly through humid Oklahoma summers.

What it costs in Moore

Coil sanitizing and bacterial treatment for a typical residential system in Moore typically costs $180-$380, including cleaning and antimicrobial application.

How we do it

We clean the coil surface, apply an EPA-registered antimicrobial labeled for HVAC use, and photograph the coil before and after so you can see the difference.

UV Light Installation

Signs you need it

Recurring mold or bacteria on the coil despite cleaning, or a household member with respiratory sensitivities that worsen when the HVAC runs, are common reasons Moore homeowners add UV.

What it costs in Moore

Installing a UV-C light at the evaporator coil in Moore typically costs $450-$900, including the lamp, mounting, and wiring by a qualified technician.

How we do it

We mount the UV-C lamp in the supply plenum facing the coil, wire it to the system, verify operation, and document the installation with photos of the mounting and wiring.

Air Purifier Install

Signs you need it

If red-clay dust accumulates rapidly on registers and returns despite duct cleaning, or household members react to allergens during Oklahoma’s spring and fall transitions, a whole-system purifier helps.

What it costs in Moore

Whole-system air purifier installation in Moore typically costs $500-$950, including the unit, mounting, and electrical connection.

How we do it

We install the purifier in the supply plenum, connect it to the system so it runs when the blower runs, verify operation, and photograph the completed installation.

What Air Quality & Sanitizing Costs in Moore

Does sanitizing actually do anything, or is it just a fog spray?

It does something measurable when applied to a documented microbial problem. We photograph the affected surfaces before treatment, show you what’s there, and photograph again after. If you have no microbial growth, we’ll tell you that too. Call (806) 606-6902.

Will an air purifier help with Moore’s red-clay dust?

A whole-system purifier reduces airborne particulates, but it works best after the ducts and coil are cleaned. Adding a purifier to loaded ducts just pushes dust through a dirty system. Call (806) 606-6902 for a written quote.

Brands We Service in Moore

We work on duct systems tied to every major HVAC brand found in Moore homes, and we carry parts for the most common configurations we see in post-2013 rebuilds and older ranches alike. Our equipment includes Rotobrush, Nikro, Abatement Technologies, and Guardsman, professional-grade tools you can look up independently. Same-week scheduling is typical for most Moore jobs. See our brands for the full roster.

Pricing for Air Duct Cleaning in Moore, OK

Neighborhoods We Serve in Moore

We cover all of Moore, from the pre-1999 ranches on the north and east sides to the post-2013 rebuilt corridors around Plaza Towers Elementary and south of SW 4th Street. Most jobs are scheduled within three to five business days.

• Old Town Moore
• Southmoore
• East Hills
• Oak Creek
• Sendera Lakes

Service Area - Cities Near Moore

Our Moore crews also serve homeowners across the south OKC metro. That includes Oklahoma City, OK, where many older homes have the same galvanized-duct issues as Moore, Norman, OK with its mix of student rentals and fixed-up bungalows, Edmond, OK with newer flex-duct construction facing the same attic heat load, and Midwest City, OK where much of the housing stock mirrors Moore’s pre-1999 ranch era.

FAQs About Air Duct Cleaning in Moore