Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Dania Beach, FL
Dryer vent cleaning in Dania Beach runs $129-$189 for a standard single-story home, and the job usually takes about an hour. What makes Dania Beach different from a job in Hollywood or Pembroke Pines is the housing stock: thousands of 1950s-1970s concrete-block homes still have original or early-replacement dryer ducts routed through attics where South Florida heat bakes lint into a hard, papery crust that a basic vacuum won’t pull. If you’re noticing longer dry times or a burning smell, call (806) 606-6902 and we’ll put a written price in front of you before any work begins.
Why Dania Beach Homes Are Different
Dania Beach sits directly under the approach and departure corridors for Fort Lauderdale-Hollywood International Airport. That means residential HVAC systems here pull in a mix of jet exhaust particulates, aviation-fuel combustion residue, salt-laden Atlantic air, and the standard Florida humidity that keeps duct interiors perpetually damp relative to the air around them. The result is a contamination profile we don’t see in inland Broward County: a greasy, slightly sticky, dark film that builds on the inside of supply boots and return plenums, then bonds with the mold and dust that humidity creates.
The older blocks between Dania Beach Boulevard and the airport perimeter are the most affected. Homes there are largely concrete-block construction from the 1950s through the 1970s, and many still run original flexible ductwork through poorly ventilated attics. Flex duct ages badly in that environment: the inner liner degrades, the outer jacket tears, and collapsed sections go unnoticed because nobody opens the attic in July. Salt corrosion on metal registers and duct collars accelerates the process. When we pull a register in these homes, the camera frequently shows a combo we’ve learned to expect in Dania Beach: oily soot on top of mold colonization on top of rust flakes. Standard dry-vacuuming lifts the top layer and leaves the bonded film behind. The work here demands rotary brush agitation and negative-pressure extraction, and that’s what we run on every job.
Our Main Dania Beach Services
Most Dania Beach homeowners call us first about the two services below. Each has its own dedicated page with full pricing, signs, and process detail.
Air Duct Cleaning in Dania Beach
The full duct-cleaning write-up for Dania Beach covers what our camera finds in supply and return runs across the older CBS homes near the airport corridor, what a documented before-and-after record looks like, and line-item pricing for the whole system. Salt-air corrosion on metal components and the oily film from flight-path exposure mean this work rarely matches a standard inland job. Air Duct Cleaning in Dania Beach explains the process we run and the written price you’ll see before we start.
HVAC Cleaning in Dania Beach
HVAC cleaning in Dania Beach goes beyond the duct runs: we open the air handler, inspect the evaporator coil, clean the blower assembly, and check condensate drainage. In homes near the Intracoastal and the ocean, salt air pits coil fins and accelerates corrosion on the blower wheel, and a dirty coil in a chilled, humid cabinet becomes a mold substrate fast. HVAC Cleaning in Dania Beach details that service, including the photo record we deliver when the cabinet goes back together.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterDryer Vent Cleaning in Dania Beach
Dryer vent cleaning in Dania Beach typically runs $129-$189 for a standard run, and the reason it matters here is specific: the 1950s-1970s concrete-block homes common to Dania Beach frequently route dryer exhaust through long, heat-soaked attic spaces where lint accumulates faster and dries into a hard, dense plaque against the duct walls. That compacted lint is more likely to clog the run completely, which is the condition that causes dryer fires and forces the thermal fuse to trip. Our Dryer Vent Cleaning service removes the buildup to the full length of the run and documents the result with photos from the inside of the duct, before and after.
Dryer Vent Inspection
Signs you need it
Clothes take more than one full cycle to dry, or the dryer exterior gets unusually hot to the touch while running.
What it costs in Dania Beach
A dryer vent inspection in Dania Beach runs $89-$149 depending on access to the exterior termination point and attic routing.
How we do it
We send a camera through the full vent run from the dryer connection to the exterior termination, checking for lint blockages, disconnected sections, crushed flex, and animal nesting.
Vent Cleaning
Signs you need it
You see lint accumulating around the exterior vent hood, or the dryer shuts off mid-cycle and displays an airflow error code.
What it costs in Dania Beach
A full dryer vent cleaning in Dania Beach runs $129-$189, with upcharge potential for runs that exceed 25 feet or require roof access.
How we do it
We run a powered rotary brush through the entire vent from the dryer side, then extract loosened debris with a negative-pressure vacuum and confirm the result with after photos of the duct interior.
Lint Removal
Signs you need it
The dryer has begun tripping its thermal fuse or the exterior vent flap stays partially open because lint is backing up behind it.
What it costs in Dania Beach
Expect to pay $129-$189 for lint removal that covers the full vent run, including the transition hose behind the dryer.
How we do it
We clear the transition hose, the wall duct, and the exterior termination point, removing compacted lint and confirming clear airflow with documented photos from the inside of the run.
Vent Rerouting
Signs you need it
The current vent run takes an unnecessarily long or twisting path through the attic, or it terminates in a soffit vent that pushes moist, lint-laden air back into the attic space.
What it costs in Dania Beach
Vent rerouting in Dania Beach runs $250-$650 depending on the new termination point and the number of wall or roof penetrations required.
How we do it
We re-route the duct to the shortest practical path with minimal bends, install a code-compliant exterior termination with a backdraft damper, and document the new routing with photos.
Bird Guard Installation
Signs you need it
You hear birds or scratching sounds near the dryer vent termination, or you find nesting material protruding from the exterior vent hood.
What it costs in Dania Beach
A bird guard installation in Dania Beach runs $75-$150 as a standalone service, and is commonly added to a vent cleaning or rerouting job.
How we do it
We remove nesting material from the vent run without harming the animals, then install a screened guard over the termination point to prevent re-entry while preserving full airflow.
What Dryer Vent Cleaning Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Dryer vent inspection | $89-$149 |
| Dryer vent cleaning (standard run) | $129-$189 |
| Vent rerouting | $250-$650 |
The written price you receive before we begin reflects the measured length and condition of your specific vent run, not a generic package rate. We don’t charge per vent or add a surprise access fee once we’re on site.
How can I tell if my dryer vent is clogged in Dania Beach?
A drying cycle that takes twice as long as it did a year ago is the clearest sign. At that point the vent is already partially blocked, which forces the dryer to overheat and work against the backpressure. Call us before the thermal fuse fails.
Does my Dania Beach home’s older attic routing affect dryer vent maintenance?
Yes. Vents routed through hot, uninsulated attics dry lint into a crust that standard vacuum equipment doesn’t remove. Rotary brush agitation is necessary to break that compacted layer loose. That’s the method we run on every Dania Beach cleaning.
Duct Repair & Sealing in Dania Beach
Duct repair and sealing in Dania Beach addresses a housing-stock problem: 1950s-1970s concrete-block homes typically still run original flexible ductwork through hot attics, and decades of South Florida humidity and salt air have degraded liners and corroded collars to the point where conditioned air leaks into the attic instead of reaching rooms. In Dania Beach specifically, salt-laden air from the Atlantic and the Intracoastal accelerates corrosion on metal duct components faster than inland Broward cities. Our Duct Repair & Sealing service restores the run to sealed, insulated condition and documents the repair with photos of the affected sections before and after.
Duct Sealing
Signs you need it
Rooms at the far end of the house consistently run warmer than the rest, or your electric bill climbs during summer without a change in usage habits.
What it costs in Dania Beach
Aeroseal duct sealing in Dania Beach runs $1,500-$3,500 for an average single-family home, and we apply it to the full run from plenum to register.
How we do it
We pressurize the duct system and apply a sealant aerosol that fills leaks from the inside out, then confirm the reduction with pressure readings before and after.
Flex Duct Repair
Signs you need it
You open the attic hatch and see kinked, collapsed, or disconnected flex duct sections, or one register blows almost no air while the room next to it is fine.
What it costs in Dania Beach
Flex duct repair or replacement in Dania Beach runs $150-$350 per 25-foot flex run, material and labor included.
How we do it
We remove the damaged flex run, install new insulated flex duct in its place with sealed connections at both ends, and photograph the finished work from inside the run.
Duct Insulation
Signs you need it
The attic side of your ductwork feels warm to the touch in summer, or you can see condensation beading on the outside of the duct jacket.
What it costs in Dania Beach
Duct insulation replacement in Dania Beach runs $2-$5 per square foot of duct surface area, depending on insulation thickness and access.
How we do it
We strip degraded insulation, check the duct wall underneath for damage, and wrap the run with new insulation at the thickness appropriate for a South Florida attic.
What Duct Repair & Sealing Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Duct sealing (Aeroseal, full system) | $1,500-$3,500 |
| Flex duct repair/replacement (per 25 ft run) | $150-$350 |
| Duct insulation replacement (per sq ft) | $2-$5 |
Prices in Dania Beach run toward the higher end for homes where attic access is tight and salt corrosion has weakened duct connections that must be replaced, not just sealed. You’ll see the exact written price before we touch anything.
Can you repair one section of duct or do I need to replace it all?
Most Dania Beach homes need one or two sections repaired or replaced, not the entire system. We assess each run with a camera and give you a written scope for only the sections that actually show failure. The choice is yours, documented in advance.
How do I know the sealing was actually effective?
We provide pressure readings taken before and after the sealant is applied, with the numbers written on your job record. The photo documentation also shows the sealed sections from the outside and inside where access allows.
Air Quality & Sanitizing in Dania Beach
Air quality and sanitizing work in Dania Beach deals with a specific combination: the fossil-fuel particulate layer that settles into ductwork from airport flight paths, plus the mold growth fed by constant condensation in a perpetually air-conditioned coastal climate. Homes near the Intracoastal also see elevated salt content in the air, which settles on coils and registers and accelerates the cycle. Our Air Quality & Sanitizing service treats the whole system after cleaning: we apply an EPA-registered antimicrobial to the duct interiors, which addresses the microbial layer that cleaning alone doesn’t eliminate.
Mold Treatment
Signs you need it
A musty smell comes from the vents when the AC runs, or the camera inspection shows dark, patchy growth on duct liners or supply boots.
What it costs in Dania Beach
Mold treatment for the duct system in Dania Beach runs $350-$850 depending on the extent of the affected area and whether the air handler cabinet requires treatment too.
How we do it
We apply an EPA-registered antimicrobial to the cleaned duct surfaces, targeting the plenum and supply boots where condensation keeps surfaces damp enough for regrowth.
Odor Removal
Signs you need it
You notice a persistent odor that returns after cleaning, or cooking and pet smells linger far longer than they should in specific rooms of the house.
What it costs in Dania Beach
Odor removal paired with duct cleaning in Dania Beach adds $200-$500 to the base cleaning price, depending on the number of occupants and whether upholstery or carpets are a factor.
How we do it
We identify odor sources in the duct system and surrounding envelope, then apply vapor-phase antimicrobial treatments that neutralize odor compounds rather than masking them with fragrance.
UV Light Installation
Signs you need it
The indoor coil shows visible mold growth even after cleaning, or a household member has respiratory symptoms that flare up when the AC runs.
What it costs in Dania Beach
UV light installation in Dania Beach runs $800-$2,000 for a professionally installed unit from Honeywell or Aprilaire, including dedicated wiring and mounting.
How we do it
We mount the UV lamp in the supply plenum or above the coil so the light is directed at the surface where mold is most likely to form, then verify proper function and electrical connections.
What Air Quality & Sanitizing Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Mold treatment (duct system) | $350-$850 |
| Odor removal (with duct cleaning) | $200-$500 add-on |
| UV light installation | $800-$2,000 |
Jet exhaust residue and condensation-fueled mold mean Dania Beach jobs often need a heavier antimicrobial application than a dry inland home would. The written price reflects exactly what the camera showed us during inspection.
Is duct sanitizing safe for my kids and pets in Dania Beach?
The EPA-registered antimicrobials we use are labeled for HVAC applications and we control the application rate precisely. Families can be home during the work, though we will ask that rooms being treated are cleared for the hour of application and until the product dries.
How long does the sanitizing effect last in a Dania Beach home?
With the right humidity control and cleaned ductwork, the effect typically lasts 12-24 months. But homes under active flight paths collect new particulate constantly, so we recommend pairing sanitation with a regular cleaning cycle and checking the coil at least annually.
Brands We Service in Dania Beach
CleanRun installs and maintains equipment from Honeywell, Aprilaire, and Guardsman, with parts stocked in our South Florida facility for quick turnaround on Dania Beach jobs. Visit our brands to see the full roster and the documented specifications on each unit we recommend.
Pricing for Air Duct Cleaning in Dania Beach, FL
| Service | Typical range in Dania Beach |
|---|---|
| Dryer vent inspection | $89-$149 |
| Dryer vent cleaning | $129-$189 |
| Vent rerouting | $250-$650 |
| Aeroseal duct sealing | $1,500-$3,500 |
| Flex duct repair (per run) | $150-$350 |
| Duct insulation replacement | $2-$5 per sq ft |
| Mold treatment | $350-$850 |
| Odor removal add-on | $200-$500 |
| UV light installation | $800-$2,000 |
Two factors push Dania Beach pricing upward relative to inland cities: the oily particulate film from airport flight paths requires heavier brush agitation and longer cleaning cycles, and the older concrete-block housing stock means attic access is frequently tight and flex duct is more often degraded enough to need repair rather than simple cleaning. Every job still gets a written price before work starts, per Haven Standard Clause 1.
Neighborhoods We Serve in Dania Beach
CleanRun’s crews work throughout Dania Beach, including the older blocks near the airport where housing stock and flight-path contamination are concentrated. We do not batch neighborhoods or set response windows per area; the whole city is covered by our South Florida dispatch on the same schedule.
- Dania Beach Boulevard corridor
- Melaleuca Gardens
- Downtown Dania Beach
- Estates of Fort Lauderdale
- Ravenswood Estates
Service Area - Cities Near Dania Beach
CleanRun serves Dania Beach as part of a broader South Florida territory. The same written-price policy and documented photo record apply whether you’re in Miami, FL or Tampa, FL, Orlando, FL, or Jacksonville, FL. The crews are dispatched from our Miami metro office, and the pricing tables on this page apply to Dania Beach specifically.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Dania Beach
Our Dania Beach scheduling runs through the South Florida office and we work on a first-call, first-scheduled basis. Once you call, we confirm a date and time that works for you. You’ll get a written price before any work begins, and the crew arrives in uniform, background-checked, and identified by name.
Most duct cleaning, vent cleaning, sealing, and sanitizing work does not require a permit in Dania Beach. If your neighborhood has an HOA with exterior modification rules, that typically applies only to new vent terminations or visible exterior work. We will flag any potential requirement before you’re asked to approve the scope.
The airport approach paths deposit an oily, greasy particulate film into the air that your HVAC system constantly draws in, and the constant humidity plus salt air means that film bonds with mold and rust instead of staying loose. Standard vacuuming doesn’t remove the full layer, which is why our Dania Beach jobs use rotary brush agitation on every run.
If you have questions about your duct system, your dryer vent, or the air you’re breathing in Dania Beach, call (806) 606-6902. We’ll answer the phone, walk through what you’re seeing, and give you a written price before any work starts. No per-vent pricing, no surprises after the van shows up.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dania Beach Customers Say
"The before and after photographs of each run are the reason I used them. You cannot argue with what came out of the return."
- Marguerite O."Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B."The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M.