Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Keller
Air duct cleaning in Keller typically costs $450-$950 for a full system on a 3,000 sq ft two-story home, with most jobs completed in a single day. That range reflects Keller’s dominant housing stock: large brick homes built between 1993 and 2010 with multi-zone HVAC and long flex-duct runs that hold more debris than smaller, single-zone systems. Our crews serve Keller directly from the Dallas-Fort Worth metro office, and every job starts with a written price before a single panel comes off. Call (806) 606-6902 and you’ll speak to a live person who can walk you through what your specific floor plan will likely require.
Why CleanRun Air Duct Cleaning Is Keller’s Preferred Air Duct Cleaning Company
Keller homeowners tend to research before they call. That works in our favor, because what we hand over at the end of a job is a documented record of what was actually inside your ducts: photos of every run, before and after, included as a standard deliverable. No other Air Duct Cleaning company we know of in the Keller area has done this on every job since 2013. The record shows the debris load at the plenum, the condition of flex-duct connections in the attic, and the airflow verification after extraction. It’s the difference between a service and a shop-vac visit.
Tomas Reyes, who leads CleanRun Air Duct Cleaning, built the company’s standard around a simple idea: a homeowner should never have to trust a technician’s word when a photograph will do. Keller customers consistently point to two things in their feedback. First, the technicians are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3. Second, the 365-Day Done Right Promise is in writing, not a verbal assurance. If the work isn’t right, we make it right. That guarantee applies to every Keller job, including the multi-zone attic systems we see so often here.
Response time to Keller is straightforward. Scheduling is coordinated from the DFW metro office, and we run dedicated routes through the northeast Tarrant corridor, so a Keller appointment is not a detour for us. You’ll talk to a live person when you call (806) 606-6902, get a written quote before work starts, and know the name of the technician who’ll arrive at your door.
Our Air Duct Cleaning Services in Keller
Residential Duct Cleaning
Most Keller homes fall between 2,500 and 4,500 sq ft with two or more HVAC zones. That means longer duct runs, more joints, and more surface area where dust, dander, and pollen settle over 20-plus years. We clean the full system, not just the visible registers. Every residential job includes camera inspection before and after, so you can see the condition of the runs we’re cleaning and verify the result when we’re done.
Commercial Duct Cleaning
Keller’s commercial spaces along Keller Parkway and in the Town Center area include offices, medical suites, and retail spaces that run HVAC nearly year-round. Commercial duct cleaning here often involves rooftop units and longer return runs that accumulate debris faster than residential systems. We schedule around business hours and provide the same documented photo record for commercial clients that we do for homeowners, so facility managers have verifiable evidence for maintenance logs and tenant requests.
Supply Duct Cleaning
Supply ducts carry conditioned air from your air handler to each room. In Keller’s two-story homes, supply runs are often routed through 150°F attics, where flex-duct inner liners degrade over time and joints separate. We run negative-pressure extraction through every supply run and camera-inspect the boot connections at the attic plenum. If we find a separated boot, we flag it and quote the repair in writing before any restoration work begins.
Return Duct Cleaning
The return side is where Keller’s January-February mountain cedar surge and spring oak pollen load tends to concentrate. Return ducts pull unfiltered air from living spaces back to the unit, and the return plenum is often the most debris-packed section of a Keller system. Skipping return ducts while cleaning supplies is one of the most common failure modes we see from other companies in this market. A return-only cleaning is also available for Keller homeowners who have already had supply work done and want verification that the full loop is clear.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
Keller’s HVAC installs run the usual North Texas range: Trane, Lennox, Carrier, Goodman, and Rheem, with Aprilaire and Honeywell filtration systems common in the larger two-story builds. Our equipment roster includes Rotobrush agitation tools, Nikro negative-pressure units, and Guardsman sanitizing systems, all professional-grade gear you can look up independently. Because we work on Keller multi-zone systems regularly, our trucks carry the flex-duct connections, boot seals, and mastic we need to correct the common attic air-handler failures we find during cleanings. That means when our camera shows a separated boot in your attic, we can often resolve it on the same visit rather than scheduling a follow-up.
Common Air Duct Cleaning Problems We See in Keller Homes
- Heat-separated flex-duct boots on attic air handlers. Keller’s multi-zone systems with secondary units in the attic endure 150°F+ temperatures every summer. Over 20-plus years, the adhesive and mechanical connections at supply boots degrade, and conditioned air starts bleeding into the attic. We find this on a significant share of Keller cleanings, and it’s the single biggest reason a cleaning here is also an attic leak inspection.
- Debris-packed return plenums from seasonal allergen surges. Mountain cedar peaks in January and February, oak pollen follows in spring, and Keller homes with continuous May-September AC runtime pull that allergen load into the return side. The return plenum is frequently the most loaded section of the system, and skipping it leaves the job half done.
- Long flex-duct runs that low-suction equipment cannot clear. Keller’s larger floor plans mean runs of 30-50 feet or more from the attic air handler to the far registers. Portable vacuums without truck-mounted negative pressure stall on these runs. We use truck-mounted extraction for the entire job, not just the easy sections near the unit.
- Sagging flex-duct in attic spaces. In Keller’s 1990s-2000s builds, original duct hangers and straps can fail over time, letting flex-duct sag and create low spots where debris collects and airflow drops. We identify sag during camera inspection and note it in the written report, with repair options priced separately so you’re never surprised by a scope change.
Pricing for Air Duct Cleaning in Keller, TX
A full-system cleaning for a typical Keller home runs $450-$950, depending on square footage, number of zones, and whether you have one attic air handler or two. A single-zone home under 2,000 sq ft typically falls at the lower end, while a 3,500-4,500 sq ft two-story with dual attic units and 20-plus flex runs will land in the upper range. Written price before work starts, every time, under Haven Standard Clause 1. No per-vent pricing, no coupon that becomes an upsell. If you have a competitor’s written estimate, bring it. Free Second Opinion means we’ll put our number next to theirs in writing, and you decide. Call (806) 606-6902 for your free estimate.
We Also Serve Cities Near Keller
Beyond Keller, our crews cover the surrounding northeast Tarrant County market, including North Richland Hills, Southlake, Haltom City, and Colleyville. Homeowners in those areas get the same written pricing, documented photo record, and 365-Day Done Right Promise that Keller residents receive on every job.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Keller
Most Keller homes should have ducts cleaned every 3-5 years, with homes running continuous AC from May through September and homes with high allergen sensitivity closer to the 3-year mark. The mountain cedar surge in January-February and oak pollen in spring drive heavier return-side debris than what we see in other DFW suburbs, and Keller’s long flex runs hold more of that material. If you cannot recall the last cleaning or have never had the return plenum inspected, call (806) 606-6902 and we’ll give you an honest written assessment.
Your attic air handler adds an entire second connection point that a single-zone crawlspace system doesn’t have. Keller homes with secondary attic units have supply and return runs in the attic that experience the full thermal load of 150°F summers, and those connections are where flex-duct boots separate and leak conditioned air. A proper cleaning here means accessing the attic unit, camera-inspecting every boot connection, and addressing any heat-degraded seal before extraction, not just vacuuming registers from inside the house.
Yes, and in Keller it often does. During camera inspection of the attic air handler and flex-duct runs, our technicians routinely identify separated boots, loose connections, and sagging sections that have been leaking conditioned air into the attic for years. The inspection is part of the cleaning, not an add-on, and any leaks we find are photographed, written into the scope, and priced separately before any repair work begins.
You need both. Keller’s return ducts carry unfiltered air from your living spaces back to the unit, and that’s where mountain cedar, oak pollen, and household dust concentrate. Cleaning only the supply side leaves the return plenum packed with debris that re-contaminates the system within weeks. Every CleanRun job includes supply and return cleaning as standard, with before-and-after photos of both sides in your documented record.
Expect $650-$950 for a two-zone Keller home over 3,000 sq ft with an attic air handler, assuming no major duct repairs are needed. The range reflects the additional runs, the attic access work, and the extra time required to properly clean both zones. If your home has a secondary attic unit and you’ve never had the boot connections inspected, the cleaning will likely include that inspection as part of the standard scope. Call (806) 606-6902 and we’ll provide a written quote based on your home’s actual layout.
For a written price, a documented photo record of every duct run, and work backed by the 365-Day Done Right Promise, call CleanRun Air Duct Cleaning at (806) 606-6902. We serve Keller homeowners with the same standard on every job: written price before work starts, verified crews, and photo evidence of what we found and what we left behind.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Keller since 2013.