Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Taylor
Air duct cleaning in Taylor typically runs $350-$650 for a full residential system, including supply and return sides, with same-week scheduling available. Most of the work we do in Taylor involves 1950s-1970s ranch homes whose ductwork has never been cleaned since the day it was installed. We know these systems because we open them up every week. Tomas Reyes, who leads CleanRun Air Duct Cleaning, has built a 52,000-home track record on one simple practice: a written price before work starts, and a photo record of every duct run before the crew leaves. Call (806) 606-6902 for a free estimate, and you’ll get an honest number, not a sales pitch.
Why CleanRun Air Duct Cleaning Is Taylor’s Preferred Air Duct Cleaning Company
Taylor’s housing stock is distinct. Most of the homes here are single-story brick ranches and bungalows built between roughly 1955 and 1975, many with original trunk-and-branch supply ducts and panned-joist return cavities rather than dedicated return runs. That matters because a lot of companies quote these jobs without ever pulling a register to check what’s actually behind it. We quote differently. We inspect first, then put a written number in front of you.
Our technicians working in Taylor know the streets around Heritage Park, the grid off Telegraph Road, and the neighborhoods branching from Eureka Road. They understand that an older Downriver ranch often hides crushed flex runs, disconnected branches, or a return side that amounts to an open joist bay with a metal face tacked over it. That’s not what a generic duct cleaning crew looks for. It’s what we look for every time, because it’s the single biggest reason a cleaning doesn’t hold.
Every Taylor job is backed by the 365-Day Done Right Promise, which is a written guarantee, not a marketing line. Every visit also concludes with a Documented Photo Record of the inside of every duct run. You see what was there, and you see what was fixed. We don’t ask you to take our word on anything.
Our Air Duct Cleaning Services in Taylor
Residential Duct Cleaning in Taylor
A standard residential cleaning in Taylor covers the full system: supply trunk, branch lines, registers, and the return side, including panned-joist cavities when present. We use a negative-pressure extraction rig (Rotobrush or Nikro equipment, depending on the access layout) to pull debris out rather than push it around. On a typical Taylor ranch, this means disconnecting the air handler, sealing each register, and cleaning in sections so debris can’t migrate into rooms.
Commercial Duct Cleaning in Taylor
Retail spaces, offices, clinics, and property management accounts across Taylor get the same written-price structure as residential work. Commercial systems here often sit above drop ceilings or in mechanical closets with decades of accumulated particulate from nearby industrial corridors along the I-94 and Telegraph industrial zones. We schedule commercial cleaning around operating hours so business continues without disruption.
Supply Duct Cleaning in Taylor
The supply side carries conditioned air from the furnace or air handler to every room. In Taylor homes with original sheet-metal trunk lines, we routinely find construction dust, drywall mud, and insulation fiber dating back to the home’s construction. On panned-joist homes, the supply side is usually the only dedicated ductwork present, which means it carries the entire heating and cooling load. Cleaning it properly requires more than brushing the last three feet of each branch run.
Return Duct Cleaning in Taylor
This is where Taylor work gets specific. In a large share of 1950s-1970s Downriver ranches, the “return” is not a duct at all. It’s a panned-joist cavity: the space between two floor joists, enclosed with sheet metal, carrying air back to the furnace. These cavities were never designed to be cleaned. Most have never been opened. They sit directly below the floor, collecting decades of debris, and are the primary reason we push video inspection on older Taylor homes before quoting.
BeforeAfterTrusted Brands We Service in Taylor
The equipment on our Taylor trucks includes Rotobrush and Nikro extraction machines and Abatement Technologies HEPA filtration. These are trade-standard brands you can look up independently before you agree to anything. We don’t use shop vacs. For attic and crawlspace runs in Taylor ranches, we often run Guardsman insulation products where sealing is part of the job. If your system was installed with Honeywell or Aprilaire components (common in mid-century Downriver forced-air systems), we service and clean around them without voiding any existing warranties.
Common Air Duct Cleaning Problems We See in Taylor Homes
- Panned-joist returns that have never been opened. The return side in many Taylor ranches is a floor joist bay with sheet metal nailed over it. Inside: sixty years of dust, insulation, rodent droppings, and drywall debris. Most owners don’t know it exists until we pull the register and show them the photo.
- Crushed or disconnected flex runs in crawlspaces. Homes that had partial retrofits in the 1980s or 1990s often have flex duct that has sagged, kinked, or separated at the elbow. The furnace runs fine, but half the air never reaches the room. We find these with a video camera, not by guessing.
- Musty odor at first heat-up each fall. Taylor’s Great Lakes climate produces humid summers. When the furnace fires up in October, any moisture that accumulated in poorly sealed ductwork turns into a musty smell that floods the house. This is usually microbial growth in the return cavity or a disconnected supply run pulling crawlspace air.
- Return plenum drawing from the crawlspace. On cul-de-sac homes off Ecorse Road near Heritage Park, we’ve pulled registers to find the pan face missing entirely. An open joist bay was serving as the return plenum, pulling dirt and rodent allergens straight into the air handler and distributing them through the supply runs at every cycle.
Pricing for Air Duct Cleaning in Taylor, MI
A full residential system cleaning in Taylor runs $350-$650, including both supply and return sides. Homes under 1,400 square feet typically fall at the lower end; larger ranches with multiple trunk lines or crawlspace access run higher. Return-side work on panned-joist systems adds $150-$300 when sealing is required, because we source-remove debris from the joist bay, then seal it properly. That’s the real fix, not a brush-and-vacuum pass. Video inspection is included with every full-system cleaning. We don’t quote per-vent. We don’t run teaser coupons. You get one written price per system, before any panel comes off, and that’s the number on the invoice unless you approve additional scope in writing first. Call (806) 606-6902 for a free estimate.
We Also Serve Cities Near Taylor
CleanRun Air Duct Cleaning handles Air Duct Cleaning in Taylor and the surrounding Downriver and western Wayne County communities. That includes Dearborn Heights, Lincoln Park, Dearborn, and Westland. If you’re a few miles from Taylor and dealing with the same 1960s-era ductwork, the same written pricing and photo record applies.
Serving Taylor, MI - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Taylor
Yes, it needs special handling. Panned-joist returns were a cost-cutting construction method used heavily in 1950s-1970s Downriver housing. Instead of installing a dedicated return duct, builders enclosed the space between floor joists with sheet metal and used it as the return-air path. These cavities collect debris that standard duct cleaning tools can’t reach properly. In Taylor, we treat panned-joist systems as a separate scope item: the joist bay gets source-removal with negative pressure and HEPA filtration, then we show you the before and after photos. Call (806) 606-6902 to find out if your return side is panned and what it’ll take to clean it.
We clean the entire system: trunk line, every branch run, the supply registers, and the full return side including any panned-joist cavities. Some Taylor companies brush the visible part of a branch run and call it done. That’s not cleaning; that’s dusting. Our standard full-system cleaning in Taylor includes video inspection of the main trunk and return path as part of the job record, so you don’t have to wonder whether we actually got past the third elbow.
In Taylor, the musty first-heat smell is almost always moisture that accumulated in the return system during Michigan’s humid summer, then cooked off when the furnace fired up in October. The return side in these ranches is often a panned joist bay that pulls air from spaces you’ve never seen. If the smell returns every fall, it’s worth a video inspection of the return cavity specifically. Call (806) 606-6902 and we’ll trace it before you spend another season breathing it.
A panned joist return can work for decades if it’s sealed and clean, but many Taylor homes have pans that were never sealed properly in the first place. The bigger problem is when the pan face is missing entirely, turning the cavity into an open chase that pulls crawlspace air, rodent allergens, and insulation fiber directly into the air handler. We don’t always recommend replacement, but we do recommend inspection first. You’ll see the photo, and then we’ll tell you honestly whether cleaning is enough or whether sealing and a proper return drop are needed.
We use negative-pressure extraction. The system is sealed at every register, the extraction unit pulls air out of the ducts under vacuum, and agitation tools knock debris loose inside the sealed run. Nothing gets blown out into the rooms. On Taylor jobs where the return side is panned, we isolate that section separately so we’re not redistributing sixty years of joist-bay debris through the supply side at first heat-up. That’s the exact failure mode we see from crews using basic brush-and-vacuum methods without containment.
Get a Written Price for Air Duct Cleaning in Taylor
If you own a Taylor home built before 1980, the odds are good your ductwork has never been cleaned properly, and the return side may be something you’ve never seen. We’ll show it to you. Call CleanRun Air Duct Cleaning at (806) 606-6902 for a free estimate. Tomas Reyes leads the team. You’ll get a written price before any work starts, a documented photo record of every run when we finish, and the 365-Day Done Right Promise in writing. That’s not a special offer. It’s the standard.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Taylor and the Downriver area.
Air Duct Cleaning in Nearby Areas
