Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Houston, NY | CleanRun Air Duct Cleaning
We’re an independent Trane service provider offering Air Duct Cleaning - Houston and repairing duct systems across the metro, and the quick answer is this: Trane air duct cleaning in Houston typically runs $350-$650 for a full single-system home, and the price is written down before any panel comes off. What makes our work here different is what Houston’s slab-foundation, unconditioned-attic housing stock does to Trane flex duct. Call (806) 606-6902 for a written estimate.
We work on Trane systems every week - XR and XL split systems, RunTru, Ameristar - and we know how Trane coils, air handlers, and flex duct layouts behave under Houston heat and humidity. No manufacturer affiliation. No authorization from Trane. Just deep independent knowledge, camera evidence of what’s inside your ducts, and a written scope before we touch anything. Check our Trane sales & service work for context on what we handle.
Why Houston Residents Choose Us for Trane Service
Most duct cleaning outfits in Houston will clean any system you put in front of them. We’re narrower than that, and it works in your favor. Our techs spend their time on Trane residential equipment specifically - the coils, the air handler cabinets, the ECM blowers, the plenum connections - so we know what a Trane system should sound like, pull like, and look like on camera before we start. That matters when the question isn’t just “are the ducts dirty” but “why is this Trane system breathing like it has asthma.”
Tomas Reyes, who runs CleanRun, grew up in Woodside, Queens, a few blocks from the elevated 7 train, in a building where the ductwork hadn’t been touched since the Carter administration. He confirmed that himself once he got into the trade. He completed his HVAC coursework at Queensborough Community College and spent years working residential and commercial duct systems across all five boroughs before building CleanRun on a straightforward rule: camera inspection first, written scope second, nothing starts until you’ve seen what’s inside. His signature line holds: “The photo tells you what’s in there. Everything else is just paperwork.”
We publish our license number on the page, not in a footer. Technicians are background-checked, uniformed, and identified by name before arrival. And every job wraps with a documented photo record of every duct run, before and after, delivered with your written warranty under the 365-Day Done Right Promise.
Common Trane Air Duct Cleaning Problems We Solve in Houston
- Evaporator coil contamination feeding supply ducts. Older XR and XL Trane units use all-aluminum spine-fin coils that hold condensation almost constantly in Houston’s humidity. Biological growth colonizes the coil, and every blower cycle pushes spores into the supply ductwork. We clean the coil and the supply runs together - doing one without the other just reintroduces the problem.
- Flex duct sagging and kinking in 150°F attics. Houston’s unconditioned attics routinely hit 140-160°F in summer. Flex duct connected to Trane air handlers softens, sags, and kinks in that heat, and a kinked return spikes static pressure so the system pulls humid attic air through any gap it can find. We repair the flex, re-support the runs, and seal the connections.
- Variable-speed blower motors choking on dust and moisture. Trane ECM blowers are precise, and they’re also sensitive. When ducts are dirty, dust and moisture accumulate on the blower control module, leading to intermittent failure or reduced airflow. A dirty duct system shortens the life of an expensive motor. Cleaning the ducts and the blower assembly together is the fix.
- Return-side flex collapsing at the plenum. Slab-foundation tract homes across Houston - Sharpstown, Spring Branch, the Energy Corridor - often have original 1970s-1990s flex return runs that tear or collapse at the plenum connection. That pulls humid attic air directly into the Trane air handler, and mold follows. We replace the flex section, re-collar, and mastic-seal the connection.
- Post-flood contamination in Trane duct systems. In flood-prone Houston neighborhoods, floodwater that reached air handlers pushed silt and mold spores straight into the ductwork. That’s a different contamination profile than normal HVAC use, and it needs different remediation. We video-inspect first, then clean and sanitize with the right process.
BeforeAfterTrane Service in Houston: What Local Conditions Mean for Your Equipment
Here’s the Houston-specific fact that shapes this work more than anything else. Houston’s post-1960s suburban boom - Spring Branch, Sharpstown, Clear Lake, the Energy Corridor - produced millions of slab-on-grade tract homes with no basements and no conditioned crawlspaces. That means virtually all flex ductwork runs through unconditioned attics that hit 140-160°F every summer, in one of the most humid major cities in the continental US. AC systems cycle nine or more months a year. Condensation risk at poorly sealed duct joints is near-constant. And the result for Trane owners specifically is this: the duct system attached to your Trane equipment is degrading faster than the equipment itself, and the failure mode is biological - mold, dust mites, and spores building up inside flex runs that were never designed for this climate’s sustained heat and moisture load. Drier Sunbelt metros don’t produce this same combination. In Houston, duct contamination is a structural consequence of the housing stock, not a periodic nuisance.
Trane Models & Products We Service in Houston
We handle the Trane residential lines Houston homes actually have. That includes XR14 and XR16 split systems, XL18i and XL20i variable-speed systems, RunTru by Trane (A4AC4, A4HP4), and Ameristar (M4AC3, M4HP3). For parts, we use OEM Trane components when they materially affect performance or safety - control boards, coil pans, blower modules. For ductwork-specific repairs like collars, mastic, and flex connectors, we use premium aftermarket materials that outperform what builders originally stapled into these homes. If a duct section is too degraded to seal, we’ll tell you it needs replacement, not patch it and bill you twice. We repair whenever sound.
Trane Service Pricing in Houston
Trane air duct cleaning in Houston runs $350-$650 for a whole single-system home, depending on system size, number of runs, and contamination level. Evaporator coil cleaning adds $150-$300 when done with the duct work. Duct sealing runs $250-$500 per section depending on access. Flex duct repair or replacement is quoted per run after we see the condition on camera. Every estimate is written and delivered before any work starts - that’s Haven Standard Clause 1, and it’s not negotiable. We’ll also match our number next to any competitor’s written quote, free. Call (806) 606-6902 for your exact price. The estimate is free, the number is in writing, and the photo record is included whether you hire us or not.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Houston
The smell isn’t coming through the filter - it’s coming from the coil and the supply ducts downstream of it. In Houston’s summer humidity, your Trane evaporator coil sweats almost constantly. Biological growth builds up on the coil face, and the blower pushes that smell through the supply runs every cycle. A clean filter doesn’t touch it because the filter sits upstream of the coil. You need the coil and our HVAC Cleaning in Houston for the supply ducts done together. Call (806) 606-6902 and we’ll camera-inspect the coil before quoting anything.
At this point, the flex duct is four decades old and has been baking in a Houston attic the whole time. The inner liner delaminates, the insulation breaks down, and the outer jacket tears. Cleaning can remove contamination, but if the flex is kinked, sagging, or separated at the joints, cleaning alone won’t fix the airflow problem. We’ll video the inside and show you exactly what’s there. If sections are too degraded to seal, we’ll say so and quote replacement per run. Call (806) 606-6902 for an inspection - the camera doesn’t lie.
More often. Houston’s humidity means your AC runs nine-plus months a year, and the condensation risk at duct joints is year-round. That accelerates mold spore, dust mite, and allergen buildup inside the ductwork in a way Phoenix’s dry heat doesn’t. Most Houston Trane owners with original flex duct should be inspected every three years and cleaned as the camera evidence dictates. If you’ve never had it inspected, start there. Call (806) 606-6902 and schedule a video inspection - you’ll see what’s in there before any cleaning is quoted.
Usually not. Floodwater carries silt, sewage, and organic material into the air handler and the first several feet of supply ductwork. A regular duct cleaning doesn’t address the contamination embedded in the air handler cabinet, the blower wheel, or the coil - and mold will re-establish in the ducts within weeks. In Meyerland and Kingwood, we routinely pull back flex duct and find silt and biological growth that originated in the flood, not from normal HVAC use. That requires coil cleaning, blower cleaning, duct cleaning, and sanitizing as a single job. Call (806) 606-6902 for a post-flood inspection quote - the camera will show you what’s actually in there.
Yes. Trane ECM blower motors run on control modules that don’t tolerate dust and moisture well. When ducts are dirty, fine particulates coat the module and the motor windings. Moisture from Houston’s humidity accelerates the degradation. The result is intermittent blower failure or reduced airflow - and an ECM replacement that runs $600-$900, far more than a duct cleaning. Keeping the ducts clean protects the motor. Call (806) 606-6902 and we’ll inspect the blower while we’re in the system.
Service Areas Near Houston
Beyond Houston proper, we run Trane duct service across the surrounding region - from the Houston service area map through neighborhoods like Sharpstown, Meyerland, and the Energy Corridor. For readers comparing coverage, our team also handles Trane service in Queens and Trane service in Philadelphia. Same standard everywhere: written price first, camera evidence, photo record when we leave.
Book Your Trane Service in Houston Today
We keep it simple. You call (806) 606-6902, we schedule the video inspection, and you get a written price before any duct work starts. Every job ends with a photo record of every run. Every job carries the 365-Day Done Right Promise. That’s the whole deal.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Houston since 2013.