Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Air Duct Cleaning in Farmers Branch, TX
Dryer vent cleaning in Farmers Branch costs $89-$269 for a standard single-family home, and duct repair work typically runs $300-$1,400 depending on how much of the original 1950s-1960s galvanized ductwork has failed. The homes here, mostly brick ranches built during the first postwar suburban boom, sit next to one of the densest freight corridors in the Metroplex along I-635 and I-35E. That means vent clogs and duct leaks we find in Farmers Branch carry a greasy, dark-gray soot load that newer suburbs ten minutes north simply don’t see. If your dryer takes two cycles to finish a load, call (806) 606-6902 and we’ll put a written price in front of you before any work starts.
Why Farmers Branch Homes Are Different
Farmers Branch’s core housing stock is 1950s and 1960s brick ranch, and a striking amount of it still runs on original galvanized sheet-metal ductwork or early fiberglass duct board. The fiberglass liner inside those older systems degrades over time and sheds particulate directly into the airstream. That’s a physical fact of the housing stock, not a guess. But the deeper variable here is location. Residential streets south of LBJ Freeway, particularly around Valwood Parkway, sit close enough to the I-635 and I-35E freight corridors that diesel particulate infiltrates return-air leaks and open windows. Technicians working those blocks routinely pull duct debris with a noticeably darker, denser character than the dust loads we see in Carrollton’s newer subdivisions a few miles north.
North Texas’s cooling season runs hard from May through October, which means Farmers Branch HVAC units cycle more hours each year than systems in most U.S. markets. More runtime means more air exchanges, more particulate settling, and faster accumulation inside duct runs. Spring thunderstorm season adds another layer: repeated pressure swings pull outdoor dust and allergens through any unsealed duct penetration, and older homes in Farmers Branch tend to have plenty of those. The result is a duct contamination profile that is measurably heavier than what most homeowners expect, and it changes what a proper cleaning or sealing job actually requires.
Our Main Farmers Branch Services
Two services account for most of the calls we take from Farmers Branch homeowners: full air duct cleaning and HVAC cleaning. Here’s what each involves in this city’s housing stock.
Air Duct Cleaning in Farmers Branch
In Farmers Branch, air duct cleaning is rarely cosmetic. The combination of 50-70-year-old duct runs, degraded fiberglass liner, and diesel soot infiltration from surrounding freight corridors means the inside of most duct systems here shows real contamination on camera, not just household dust. We run negative-pressure extraction with a Rotobrush or Nikro system, photographing every duct run before and after so you can see what was actually removed. The full scope of this service, including local pricing, signs, and what a documented photo record means for your home, lives on its own page: Air Duct Cleaning in Farmers Branch.

HVAC Cleaning in Farmers Branch
HVAC cleaning in Farmers Branch focuses on the evaporator coil, blower motor, plenum, and condensate pan. In older ranch homes, the plenum is often lined with the same aging fiberglass that sheds particles into the airflow, and the coil picks up a greasy film from the same diesel particulate that darkens the ductwork. We clean those components with professional-grade equipment from Abatement Technologies and Guardsman, and every job concludes with a documented photo record of the interior surfaces. Detailed pricing and the step-by-step scope for this service is here: HVAC Cleaning in Farmers Branch.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterDryer Vent Cleaning in Farmers Branch

Dryer vent cleaning in Farmers Branch has to account for lint that is heavier and more adhesive than the fluffy accumulation most people picture. The same diesel soot that darkens duct interiors mixes with dryer lint to form a denser, stickier layer that clogs faster and restricts airflow harder than lint alone ever does. In 50-70-year-old brick ranches where the vent run snakes from an interior laundry closet to an exterior wall, that restriction becomes a genuine fire risk as well as an efficiency drain. A full Dryer Vent Cleaning includes the documented photo record and the written price before work begins. For more on our broader dryer-vent scope, see Dryer Vent Cleaning.
Dryer Vent Inspection
Signs you need it
Clothes take more than one full cycle to dry, or the dryer exterior runs noticeably hot to the touch.
What it costs in Farmers Branch
A camera inspection of the full vent run in Farmers Branch runs $39-$89, and the written report includes before photos of any restriction we find.
How we do it
We run a camera from the dryer connection to the exterior termination, photographing restrictions, damaged pipe, or broken joints along the entire run.
Lint Removal
Signs you need it
Lint accumulates visibly at the exterior vent hood, or the dryer shuts off mid-cycle on its high-limit safety switch.
What it costs in Farmers Branch
Full lint removal from the vent run costs $89-$189 for a standard single-family home in Farmers Branch, depending on run length and clog density.
How we do it
We use a rotating brush and HEPA-filtered negative-pressure extraction from the exterior termination backward, removing the lint column and vacuuming the interior run.
Vent Rerouting
Signs you need it
The existing run flexes into sharp elbows, exceeds 35 feet in effective length, or terminates into a soffit or crawlspace instead of a dedicated exterior hood.
What it costs in Farmers Branch
Rerouting a dryer vent in Farmers Branch ranges $150-$350, which includes new rigid metal duct, a proper exterior hood, and sealed joints along the entire new run.
How we do it
We remove the failed run, route rigid metal duct along the shortest code-compliant path, seal every joint with aluminum tape, and photograph the finished run from both ends.
Bird Guard Installation
Signs you need it
You hear birds, see nesting material around the vent hood, or find loose lint and grass clumped at the termination.
What it costs in Farmers Branch
A weather-resistant bird guard with pest screening, installed and documented, runs $50-$120 including the guard itself.
How we do it
We mount the guard over the exterior termination, secure it against wind and wildlife, and photograph the completed installation from ground level and at the hood.
What Dryer Vent Cleaning Costs in Farmers Branch
| Item | Typical range in Farmers Branch |
|---|---|
| Dryer vent camera inspection | $39-$89 |
| Full lint removal | $89-$189 |
| Bird guard installation (with guard) | $50-$120 |
Does Farmers Branch require a permit for dryer vent cleaning or rerouting?
No permit is required for routine dryer vent cleaning or replacement of a vent run in Farmers Branch. Rerouting work that involves a new exterior wall penetration falls under the city’s residential mechanical permit rules in most cases, though a straightforward like-for-like hood replacement typically does not.
How long does dryer vent cleaning take in Farmers Branch?
A standard Farmers Branch ranch home takes 60-90 minutes for a full cleaning, including the camera inspection and the documented photo record. Longer runs, multiple elbows, or heavy soot-lint adhesion can push that to two hours or more.
Duct Repair & Sealing in Farmers Branch

Duct repair in Farmers Branch is often about rescuing original systems. The dominant housing stock is 1950s-1960s brick ranch, and much of that era’s galvanized sheet-metal ductwork was never designed to stay airtight for 60-plus years. Joints fail, flex runs sag, and return-air plenums pull in unfiltered air from attic and wall spaces, which is exactly how diesel soot from the I-635 corridor ends up in the airstream. Sealing those leaks is the single highest-ROI improvement we can make in most Farmers Branch homes. For the full scope of our repair and sealing work, see Duct Repair & Sealing.
Duct Sealing
Signs you need it
Rooms never reach the same temperature, or visible dust accumulates on registers shortly after cleaning.
What it costs in Farmers Branch
Sealing accessible duct joints and seams in a Farmers Branch ranch runs $300-$700, depending on total footage and how many sections are reachable from the attic.
How we do it
We locate leaks with a pressure test and smoke pencil, then seal joints with HVAC-grade mastic or aluminum tape, photographing each sealed seam as part of the record.
Flex Duct Repair
Signs you need it
Flex runs sag between supports, have visible kinks or punctures, or deliver almost no airflow to a specific room.
What it costs in Farmers Branch
Replacing or repairing a failed flex duct section in Farmers Branch ranges $200-$600, including new insulated flex, hangers, and sealed connections at both ends.
How we do it
We remove the damaged flex section, install new R-6 or R-8 insulated flex with proper suspension, seal both connections, and photograph the finished run.
Metal Duct Repair
Signs you need it
You find rust, separated longitudinal seams, or crushed sections in exposed sheet-metal ductwork, or hear metallic rattling when the blower runs.
What it costs in Farmers Branch
Sectional metal duct replacement or repair in Farmers Branch runs $400-$1,400 depending on footage, accessibility, and whether the plenum itself needs work.
How we do it
We fabricate or source matching gauge sheet metal, remove the failed section, install the replacement with sealed seams and proper support, and photograph before, during, and after.
What Duct Repair & Sealing Costs in Farmers Branch
| Item | Typical range in Farmers Branch |
|---|---|
| Duct joint and seam sealing | $300-$700 |
| Flex duct section replacement | $200-$600 |
| Metal duct section replacement or repair | $400-$1,400 |
Why is duct sealing worth more than duct cleaning in an older Farmers Branch home?
Cleaning removes what’s inside the ducts; sealing stops what’s outside from getting back in. In older Farmers Branch ranches with degraded joints and return-air leaks, unsealed ducts refill with the same attic dust and diesel particulate within months. The highest-value job does both.
Can a 60-year-old galvanized duct system actually be sealed, or does it need full replacement?
Most galvanized systems from the 1950s and 1960s can be sealed effectively if the metal itself is sound. We assess each section during the pressure test; where rust or seam failure is structural, we recommend sectional replacement rather than sealing over a failing seam.
Air Quality & Sanitizing in Farmers Branch

Air quality work in Farmers Branch usually begins with a documented visual finding: mold growth on the plenum or coil from years of condensation in a continuously running system, or a dark particulate coating on return-air surfaces from the surrounding freight traffic. The older the home, the more likely the fiberglass liner inside the plenum has become a reservoir for both moisture and particulate. Sanitizing is not a substitute for cleaning; it’s the final pass after the source material is removed. We use professional-grade solutions and equipment from Guardsman and Honeywell, and every job concludes with a photo record of treated surfaces. For the broader scope of what we do, see Air Quality & Sanitizing.
Mold Treatment
Signs you need it
Visible mold on the coil, plenum, or duct interiors, or a persistent musty odor that intensifies when the blower runs.
What it costs in Farmers Branch
Mold treatment of accessible interior surfaces in a Farmers Branch single-family system runs $395-$795, including surface treatment and the documented photo record.
How we do it
We remove visible growth mechanically from accessible surfaces, apply an EPA-registered antimicrobial, and photograph every treated area before and after application.
Odor Removal
Signs you need it
Persistent cooking, pet, or musty odor that returns shortly after the system shuts off, or an odor that localizes to specific supply registers.
What it costs in Farmers Branch
Whole-system odor removal in Farmers Branch runs $250-$600, and is most effective when paired with a full duct cleaning to remove the odor source itself.
How we do it
We clean the source surfaces first, then apply a commercial-grade deodorizer through the ductwork using fogging equipment, followed by a full documented record of the treated runs.
UV Light Installation
Signs you need it
Recurring microbial growth on the evaporator coil despite cleaning, or a household member with respiratory sensitivity that tracks with HVAC runtime.
What it costs in Farmers Branch
A coil-mounted UV-C system, installed and wired, runs $600-$1,200 in Farmers Branch depending on unit size and electrical access.
How we do it
We mount the UV-C fixture at the coil line-of-sight, hardwire it to the blower circuit so it runs only when the fan runs, and photograph the installation and wiring.
What Air Quality & Sanitizing Costs in Farmers Branch
| Item | Typical range in Farmers Branch |
|---|---|
| Mold treatment of accessible interior surfaces | $395-$795 |
| Whole-system odor removal | $250-$600 |
| UV-C light installation at the coil | $600-$1,200 |
Will sanitizing fix a mold problem permanently in a Farmers Branch home?
Sanitizing kills and removes active surface growth but does not fix the moisture source that allowed it in the first place. In Farmers Branch’s continuous cooling season, unresolved condensate drainage issues or unsealed return-air leaks will re-create the same conditions. We address the source before we treat.
Do I need UV light if I don’t have visible mold?
Not necessarily. UV-C is most valuable when microbial growth is proven or recurring. We can camera-inspect the coil and plenum first; if the surfaces are clean after a proper cleaning and sealing job, the documented record will show you don’t need to add UV.
Brands We Service in Farmers Branch

We work on every major HVAC brand in Farmers Branch’s older ranch stock, including Carrier, Trane, Lennox, Rheem, and Goodman, plus the early American Standard systems still running in some 1950s homes. For a full list of what we service and the parts we keep stocked, see our brands.
Pricing for Air Duct Cleaning in Farmers Branch, TX
| Service | Typical range in Farmers Branch |
|---|---|
| Air duct cleaning (whole system) | $300-$600 |
| HVAC cleaning | $300-$700 |
| Dryer vent camera inspection | $39-$89 |
| Dryer vent lint removal | $89-$189 |
| Bird guard installation | $50-$120 |
| Duct joint and seam sealing | $300-$700 |
| Flex duct section replacement | $200-$600 |
| Metal duct section replacement or repair | $400-$1,400 |
| Mold treatment | $395-$795 |
| UV-C light installation | $600-$1,200 |
Two things push price upward in Farmers Branch more than anything else: heavy soot-laden debris that requires slower extraction passes, and 60-year-old ductwork that has never been accessed since the original build. Every price above is the full written figure you approve before a single panel comes off, under Haven Standard Clause 1.
Neighborhoods We Serve in Farmers Branch

We work residential streets across all of Farmers Branch, from the established ranch blocks south of LBJ to the garden-apartment corridors near the city’s eastern edge. Response windows vary by time of year, but our Dallas-Fort Worth scheduling office dispatches locally and most Farmers Branch jobs are scheduled within a few business days.
- Valwood Park and surrounding streets off Valwood Parkway
- Neighborhoods south of LBJ Freeway (I-635)
- Brookhaven and the residential blocks near Brookhaven College
- The 1960s ranch subdivisions west of I-35E
- Garden-apartment and condo communities near the city’s main corridors
Service Area - Cities Near Farmers Branch
Our crews serve Farmers Branch directly and also cover the broader Metroplex and Texas markets. If you’re in Dallas, TX or Austin, TX, we schedule there from the same Dallas-Fort Worth office. We also run routes out to Houston, TX and San Antonio, TX for larger commercial and multifamily projects.
Serving Farmers Branch, TX - Our Local Coverage Area

We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Farmers Branch
Most Farmers Branch jobs are scheduled within two to five business days, depending on season and crew routing. Every job starts with a written price delivered before work begins, and the documented photo record is included as a standard deliverable on the day of service. Call (806) 606-6902 and we’ll give you a firm date.
Farmers Branch HOAs rarely restrict interior mechanical work like duct cleaning or repair. Exterior work such as a new dryer-vent hood termination or roof-penetration work may require HOA review in some subdivisions, and we can usually tell you which neighborhoods enforce that quickly. We work around HOA requirements on a case-by-case basis.
Yes, and it’s measurable. The residential blocks south of I-635 sit close enough to continuous diesel traffic that return-air leaks and open windows pull in diesel particulate. Our camera inspections in Farmers Branch consistently show a darker, greasier debris profile than what we photograph in Carrollton or Plano, which is why sealing return-air leaks matters as much as cleaning here.
If your ducts haven’t been inspected in years, or your dryer vent has never been opened by a professional, call (806) 606-6902 for a free estimate. We’ll put the written price in front of you before any work starts, and you’ll get a documented photo record of every duct run when we’re done. The 365-Day Done Right Promise means that record stays accountable, in writing, long after the truck leaves your street.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Farmers Branch Customers Say
"On time, professional, and explained what the readings meant without talking down to me."
- Warren E."The before and after photographs of each run are the reason I used them. You cannot argue with what came out of the return."
- Marguerite O."Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B.




Before
After
Before
After