Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Alliance
HVAC cleaning in Alliance, OH typically runs $380-$690 for a full system on a standard forced-air home, with the evaporator coil and blower adding $140-$260 when done as part of the same visit. In most Alliance homes we complete the job in a single 4-6 hour appointment, and every customer receives a written price before a single panel comes off the return. We work in Alliance’s older housing stock every week, so we know what’s inside those ducts before the camera goes in. The coal dust, the rust scale, the capped plenum boxes left from octopus furnace conversions: this is the work we do. Call (806) 606-6902 for a free estimate.
Key Takeaways:
- Alliance’s pre-1960 homes need more than a basic duct cleaning, often requiring plenum inspection and abandoned-run sealing.
- Written price before any work starts. Always. Haven Standard Clause 1.
- Documented Photo Record of every duct run, before and after, included on every Alliance job.
- 365-Day Done Right Promise backed in writing, not just stated in marketing copy.
Why CleanRun Air Duct Cleaning Is Alliance’s Preferred HVAC Cleaning Company
We are not the cheapest HVAC cleaning company in Alliance, and we will not pretend otherwise. What we are is the company that will show you the inside of your ductwork with a camera before we touch it, quote you a written price for the exact condition we find, and deliver a photo record when we leave. In Alliance, where homes built between 1920 and 1955 carry decades of coal soot and industrial particulate, that documentation matters more than a coupon price ever could.
Alliance homeowners consistently tell us the same thing after we finish: the before photos showed them something they would not have believed without seeing it. We have pulled rust scale, coal dust, and debris that has been sitting in capped plenum boxes since the Eisenhower administration. The work is not glamorous, but it is real, and it is specific to this city’s housing stock. Our HVAC Cleaning team includes background-checked, uniformed technicians who operate under the H.A.V.E.N. Standard, with license information published on every written estimate. The 365-Day Done Right Promise means if the work is not right, we make it right, in writing, and without sending you to a call center.
Scheduling from our Cleveland office keeps dispatch simple. Our crews serve HVAC Cleaning in Alliance on a regular rotation, so we are not driving in cold from an hour away trying to guess at your duct layout. We know State Street and Union Avenue, we know the near-downtown bungalows off East Main, and we know what to look for in the basements of the craftsman homes around South Arch. That is the difference between a technician who has worked your block and one who has not.
Our HVAC Cleaning Services in Alliance
Evaporator Coil Cleaning
Evaporator coil cleaning in Alliance homes typically runs $220-$380 as a standalone service, or $140-$240 when bundled with a full duct cleaning. In older Alliance homes with retrofitted forced-air systems, coils installed during the 1950s and 60s conversion era are often undersized for the return air they now receive, which makes them a magnet for the fine coal dust that keeps recirculating from those capped plenum boxes. We clean the coil in place with professional-grade cleaner and agitation tools, then photograph it before and after so you can see the difference. A dirty coil is not just an efficiency problem: it is a direct restriction on airflow, and in homes with original sheet-metal trunk ductwork, that restriction compounds quickly.
Blower Cleaning
Blower cleaning in Alliance runs $180-$320 depending on motor access and whether the wheel requires removal. The blower in a 1950s retrofit system has been pushing air past decades of coal dust and rust scale, and the wheel typically arrives to us packed with a fine gray paste that no filter ever caught. We remove the blower assembly, clean the wheel and housing with negative-pressure extraction, and reinstall it with a documented photo record of the work. In the older near-downtown neighborhoods of Alliance, where basements are small and access is tight, this is often the single highest-impact service we perform for airflow restoration.
Condenser Cleaning
Condenser cleaning in Alliance, OH runs $160-$280 for a standard residential outdoor unit. The freeze-thaw cycles that define Alliance’s shoulder seasons mean outdoor condensers here collect road salt, leaf litter, and caked-on grime through the winter, then bake it into a crust during the summer. We clean the condenser coils with proper coil-safe equipment, straighten any bent fins we find, and check the pad and line condition while we are there. This is outdoor work that matters just as much as anything we do inside the ductwork.
Air Handler Cleaning
Air handler cleaning in Alliance runs $340-$520 when we include the blower, coil, and interior cabinet surfaces. In many of Alliance’s older homes, the air handler is not a single manufactured unit: it is an assemblage of retrofitted components mounted into a basement ceiling cavity, often surrounded by original ductwork that has never been fully sealed. We clean the interior surfaces, sanitize where appropriate with professional-grade products, and seal any gaps we can reach. What we find in there would surprise most homeowners, and our photo record will show you exactly what came out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Alliance
Our Alliance customers run systems from the full range of manufacturers found in northeastern Ohio’s older housing stock: Carrier, Lennox, Trane, Rheem, Goodman, Bryant, York, and more. The brand matters less in Alliance than the retrofit history does. A 1955 Rheem air handler bolted into a converted octopus-furnace plenum is a different animal than a 2018 Goodman installed in a new-build over in Canton. We stock replacement filters, coils, and common components for most major brands, and our work includes attention to how the system was originally installed here, not just what the label says. When your equipment needs a deeper fix, our HVAC Cleaning team will tell you in plain language before any work is scoped.
Common HVAC Cleaning Problems We See in Alliance Homes
- Capped octopus-furnace plenum boxes. In homes converted from coal to gas in the 1950s and 60s, the original plenum was often left in place, capped, and tied into the new forced-air system. That abandoned box becomes a hidden reservoir of compacted coal dust and rust scale that re-enters the air stream every time the blower runs. Most HVAC cleaning companies never look for it. We do.
- Condensation in uninsulated basement duct runs. Alliance sits in northeastern Ohio’s secondary snow-belt zone. The freeze-thaw cycling that drives moisture into basement cavities creates condensation on the exterior of older sheet-metal ducts, and that moisture supports mold growth inside the runs during spring and fall. A basic cleaning that skips this will leave the mold to recolonize.
- Shared dryer vent stacks in apartment buildings. Many of Alliance’s older apartment buildings route dryer vents from multiple units through a common stack. Lint buildup from multiple dryers creates a fire risk that no single tenant can see from inside their own unit. Our crews can clean shared stacks in most configurations without requiring a full building shutdown.
- Asbestos-wrapped seams on original ductwork. Homes built before the mid-1960s in Alliance often have asbestos tape or wrap on duct seams. We do not disturb this material. We follow NADCA standards for working around asbestos-wrapped ductwork: we encapsulate, we document, and we tell you exactly what we found and what it means before any air is moved through the system.
Pricing for HVAC Cleaning in Alliance, OH
A full HVAC cleaning in Alliance typically runs $380-$690 depending on the home’s age, the number of duct runs, and whether the system still retains original retrofitted components. Homes with abandoned octopus-furnace plenum boxes or asbestos-wrapped seams take longer to do correctly, and that is reflected in the price. Smaller jobs like a standalone blower cleaning run $180-$320. Evaporator coil cleaning runs $220-$380. Condenser cleaning runs $160-$280. If you want the full system including air handler, blower, coil, and ductwork, expect $440-$720.
We do not quote per vent. We do not run a $79 special and then “discover” problems once the van is parked. Every Alliance job receives a written price before any work starts, under Haven Standard Clause 1. You will see the exact number, in writing, before a single panel comes off. Call (806) 606-6902 for a free estimate.
We Also Serve Cities Near Alliance
Our crews work throughout Stark and Portage Counties. In addition to Alliance, we regularly serve Canton, Green, Kent, and Massillon, with the same written pricing, photo documentation, and 365-Day Done Right Promise on every job. The housing stock in those cities is newer on average, which makes the work we do in Alliance’s pre-1960 homes different enough that it is worth asking whether your HVAC cleaning company actually understands what they are opening up.
Serving Alliance, OH - Our Local Coverage Area
We’re based in the Alliance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Alliance
Because the original gravity-furnace plenum box was almost never removed during the mid-century gas conversions. In a standard duct cleaning, that capped plenum box stays sealed, and the decades of coal dust and rust scale inside it stay put, ready to re-contaminate the system the next time the blower kicks on. Cleaning it properly requires opening the plenum, extracting the debris with negative pressure and HEPA filtration, sealing the abandoned run, and documenting the work. We have performed this exact process on homes throughout Alliance’s near-downtown neighborhoods, including the 1940s bungalows off East Main and the craftsman homes near South Arch. Call (806) 606-6902 to find out whether your home still has one of these abandoned plenums.
Alliance sits in northeastern Ohio’s secondary snow-belt zone, which means the city receives meaningful lake-effect moisture through the winter and spring. That moisture drives repeated freeze-thaw cycles in uninsulated basement cavities, and older sheet-metal ducts condense on their exterior surfaces during the shoulder seasons. The result is intermittent moisture inside the duct runs, which creates conditions where mold can establish itself and then recolonize after a superficial cleaning. We address this by identifying which runs are condensation-prone, recommending insulation where needed, and applying professional-grade sanitizing treatments as part of the documented scope.
In most cases, yes. Shared dryer vent stacks serving multiple units can usually be cleaned from roof or exterior access points without requiring any unit to stop using their dryer, though we will ask that specific units pause use during the actual stack cleaning if their vent connects directly to the area we are working. The lint buildup from multiple dryers sharing a single stack is a documented fire risk, and in Alliance’s older apartment buildings, these stacks have often gone years without proper maintenance. We clean the full stack pathway, document it with before and after photos, and leave you with a written record of what was removed.
A modern blower motor is typically a sealed unit in a manufactured air handler with easily removable panels. A 1950s Alliance retrofit often has the blower housed in a converted gravity-furnace cabinet, with original mounting hardware, tight access, and decades of accumulated debris packed around the motor housing. The older configuration takes longer to access and clean correctly, and it is far more common for the wheel to arrive to us with a thick coating of coal dust and rust scale that has been baking onto the blades since the Johnson administration. We remove the blower assembly entirely, clean the wheel and housing under negative pressure, and document the process. This is not a service you want performed by someone who has never seen a pre-1960 Alliance basement.
Yes. Our technicians follow NADCA (National Air Duct Cleaners Association) standards on every job, and on Alliance homes with asbestos-wrapped seams, that means we do not disturb the wrap. We encapsulate where appropriate, document what we found with photos, and explain in plain language what the presence of asbestos tape means for your system. We do not cut corners, and we do not pretend the asbestos is not there. If we see it, we tell you before we move any air through the system, and we include it in the written scope so there are no surprises.
If your furnace is short-cycling, your blower sounds like it is working harder than it should, or you just want to see what is actually inside your ductwork, we can help. Call (806) 606-6902 for a free estimate and a written price before any work starts.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Alliance since 2013.