Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Bloomington
HVAC cleaning in Bloomington, CA typically costs between $425 and $890 for a full system cleaning on a standard ranch home, depending on how many duct runs your system has and how much diesel particulate has accumulated on your coils and blower. Most Bloomington homes need this service roughly every two to three years because of where the town sits. The I-10 and I-215 interchange, the constant warehouse truck traffic, and the Cajon Pass wind corridor all push a heavier particulate load into residential ductwork than you’d find five miles west in Rialto or Fontana. Our crews know exactly what that means for your evaporator coil and blower motor. Call Tomas and the team at (806) 606-6902 for a written price before any work begins.
Why CleanRun Air Duct Cleaning Is Bloomington’s Preferred HVAC Cleaning Company
We’re not the cheapest outfit running a $79 coupon in the Bloomington area, and we’re comfortable saying that. What we do differently is show you the inside of your ducts before anyone touches a tool. Every job includes a documented photo record of every duct run, before and after, delivered to you as part of the standard job record. That practice goes back to our first job in 2013, and it’s why homeowners near Locust Avenue, Cedar Avenue, and the older ranch tracts along Valley Boulevard keep calling us back.
Bloomington sits under a particulate load that surprises people who’ve lived here for years without looking inside their returns. The dark, sooty film our crews pull from ducts here is different from the tan dust you’d see in Rialto. It’s diesel combustion particulate, and it doesn’t come out with a shop vac. We run Rotobrush and Abatement Technologies equipment with HEPA filtration because the particle size here demands it. If you want a second look at any written estimate, we’ll put our number next to a competitor’s quote in writing, free. That’s Haven Standard Clause 1: a written price before any work starts, every time.
Our HVAC Cleaning Services in Bloomington
Evaporator Coil Cleaning
In Bloomington’s 1950s to 1980s ranch homes, evaporator coils sit inside the air handler and collect whatever the return air brings them. Here, that means diesel soot from the I-10 logistics corridor. A fouled coil raises static pressure, cuts airflow, and forces the compressor to run longer in conditions that already push past 105°F in July. We clean the coil with professional-grade equipment from Nikro and Abatement Technologies, then treat it to resist microbial growth in the condensate that the South Coast Air Basin’s humidity encourages.
Blower Cleaning
We see blower wheels in Bloomington that look like they’ve been painted dark gray. That’s not overspray; it’s years of combustion particulate bonded to the blades. A dirty blower wheel moves less air per rotation, which means your system runs longer to hit the thermostat. Cleaning it restores airflow and cuts the constant recontamination that happens when a clean duct is paired with a dirty blower. This is the single most overlooked step on interior units in this area, and skipping it means your clean ducts get re-coated within weeks.
Condenser Cleaning
The outdoor condenser coil on Bloomington homes fights a different enemy than the evaporator: coarse desert dust, Santa Ana wind debris, and pollen from the dry brush along the Cajon Pass corridor. A fouled condenser can’t reject heat efficiently, which shortens compressor life and raises cooling costs through our six-month cooling season. We wash and clear the coil, straighten bent fins where needed, and document it all in the photo record.
Air Handler Cleaning
Air handlers in Bloomington’s older ranch tracts often sit in closets or garages where they’ve never been opened since installation. The blower housing, the coil compartment, the drain pan – all of it accumulates the same fine, dark particulate that makes Bloomington’s duct debris distinctive. We clean the full air handler path, check the condensate drain line, and make sure the system isn’t just clean but actually moving air the way it should before we finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bloomington
We work on equipment from Honeywell, Aprilaire, and Guardsman among others, and our crews carry the common filters, access panels, and drain components these systems need. Because Bloomington is unincorporated San Bernardino County, some of the original equipment in these homes predates modern filtration standards. That’s not a problem we’re surprised by, and it’s not a reason to upsell you. It’s just a fact of the housing stock we see along Slover Avenue and Jurupa Avenue every week. We’ll tell you what your system has, what it needs, and what it doesn’t.
Common HVAC Cleaning Problems We See in Bloomington Homes
- Diesel-particulate soot accumulation. Homes downwind of the I-10 warehouse corridor build a dark film on coils and blower wheels faster than any other part of the Inland Empire. This combustion-derived particulate is fine enough to pass through basic filters and bond to wet coil surfaces.
- Original galvanized ductwork that’s never been serviced. Bloomington’s county jurisdiction means a meaningful share of 1950s to 1980s homes still run their original thin-gauge sheet-metal ducts. These systems were designed before modern filtration, and many have never been opened.
- Blower wheel recontamination. We’ve walked into homes that paid for duct cleaning elsewhere, only to find a blower wheel still caked in years of soot. Within a month, the newly cleaned ducts looked like they’d never been touched. The blower has to be cleaned or the job isn’t done.
- Concealed duct deterioration. Light permit enforcement over the decades means some Bloomington homes have duct runs with gaps, collapsed sections, or rusted seams. A proper cleaning with the right negative-pressure equipment reveals these issues, but a low-effort fogging job will miss them entirely.
Pricing for HVAC Cleaning in Bloomington, CA
A full HVAC cleaning for a typical 3-bedroom Bloomington ranch runs between $425 and $890, depending on the number of duct runs, the level of soot accumulation, and whether the blower and evaporator coil require the deeper cleaning this area usually demands. Dirtier systems cost more in labor, not because we add fees but because source removal takes time. Homes near the Locust Avenue and Cedar Avenue corridors, directly downwind of the logistics parks, often land on the higher end of that range because the particulate load is heavier. Evaporator coil cleaning alone typically runs $180 to $340 in Bloomington. Blower cleaning typically adds $120 to $200. You get one written price before we start, never a per-vent number and never a call back with a higher figure. Call (806) 606-6902 and we’ll put the number in writing.
We Also Serve Cities Near Bloomington
While this page is written for Bloomington homeowners, our crews regularly work in Bloomington and the surrounding communities. We serve Rialto, Fontana, Riverside, and San Bernardino with the same written pricing and documented photo record on every job. If you’re in one of those cities and need HVAC Cleaning, the process is identical: call, get a written price, see the before and after photos when the work is done.
Serving Bloomington, CA - Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Bloomington
Bloomington’s duct debris looks darker because it contains diesel combustion particulate from the I-10 logistics corridor. The warehouse distribution centers that line the freeway generate near-constant heavy truck traffic, and homes downwind of that corridor pull ultra-fine diesel soot into their return-air intakes. That soot binds to coil surfaces and blower wheels in a way that tan desert dust does not. This is the single biggest difference between cleaning ducts here versus in neighboring incorporated cities. Call (806) 606-6902 if you want to see what’s actually inside your returns before deciding anything.
Every two to three years is realistic for most Bloomington homes, which is more frequent than the national average of three to five years. The particulate load here is measurably higher because of the I-10 and I-215 truck traffic and the South Coast Air Basin’s poor air quality rankings. If your home sits north or east of the freeway, you may be at the shorter end of that range. We’ll tell you honestly whether your system needs it now or can wait, and the photo record gives you a baseline for future comparisons.
A fogging sanitiser treats the air inside the duct but does not remove the dark sooty deposits on coil and blower surfaces. In Bloomington’s particulate-heavy environment, fogging without source removal leaves the actual contamination intact while claiming microbial control that doesn’t address the problem you paid to fix. A real cleaning uses negative-pressure extraction with HEPA filtration and mechanical agitation to remove the particulate from the duct walls, coil, and blower. That’s the work we do, and the before-and-after photo record shows the difference. If someone quotes you fogging as a substitute for cleaning, get a second opinion in writing.
Yes, and the improvement is often immediate and measurable. A heavily fouled evaporator coil and blower wheel on a 1970s ranch home near the Locust Avenue corridor can lose 20 to 30 percent of design airflow. Removing that sooty buildup restores airflow, lowers static pressure, and lets the system hit temperature without running constantly. We document coil condition before and after so you can see the difference yourself. Call (806) 606-6902 for a written price on coil and blower cleaning.
Some Bloomington duct systems fail after cleaning because the underlying galvanized sheet metal has deteriorated from decades of use under light county permit enforcement. Cleaning reveals rusted seams, gaps, or collapsed sections that were hidden under dust and debris. If we find this during the job, we show you photos and give you a written scope for the repair before proceeding. We don’t clean around structural problems and call the job done. Haven Standard Clause 1 applies here as everywhere: the price is in writing before any work starts, and the documentation shows what we actually found.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Bloomington and the Inland Empire since 2013.