Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Brooklyn
HVAC cleaning in Brooklyn, NY typically costs $425-$780 for a full-system clean of evaporator coil, blower, and air handler, depending on whether you’re in a gut-renovated brownstone retrofit, a post-war co-op tower, or one of the factory-to-loft conversions along the Williamsburg waterfront. Most jobs are completed in a half day. The honest part most companies won’t tell you: a large share of Brooklyn’s housing stock has no ducts to clean at all, and we’ll say so before scheduling anything. Call (806) 606-6902 for a written price based on your actual system, not a phone estimate.
We’ve worked the full sweep of Brooklyn building types since 2013. Brownstone retrofits with slim ducts squeezed around steam risers. NYCHA towers with decades of accumulated particulates. Converted factory lofts in Bushwick and DUMBO where original industrial ventilation now carries residential air. Each demands a different approach, and we’ll document what we find with a camera before and after every run.
Why CleanRun Air Duct Cleaning Is Brooklyn’s Preferred HVAC Cleaning Company
Brooklyn homeowners research before they call. That’s who we built this company for. Every job starts with a written price delivered before a single panel comes off, under Haven Standard Clause 1. Every job ends with a photographed record of every duct run, inside, before and after. No exceptions since 2013, across 52,000+ homes served.
Our Brooklyn customers routinely check three things before booking: our license number, the equipment we run, and whether the 365-Day Done Right Promise is actually in writing. It is. The warranty is printed on every job record, not buried in a footer. If the work isn’t right, we make it right. No manager approval required.
Tomas Reyes, who leads CleanRun, set the standard this way because Brooklyn’s building stock punishes sloppy work faster than most markets. Salt air near Sheepshead Bay corrodes duct seams. Humidity in Brighton Beach basements fuels microbial growth inside return runs. A company that skips the camera inspection here gets found out quickly.
Our HVAC Cleaning Services in Brooklyn
We don’t sell a $79 special and then “discover” problems once the van is on your block in Park Slope. We quote a flat price for the system, in writing, before work starts. Here’s what that covers in Brooklyn’s most common HVAC configurations.
Evaporator Coil Cleaning
The evaporator coil sits inside your air handler and does the actual cooling work. In Brooklyn’s humid summers, this coil stays wet for months at a time, which means it collects a biofilm of dust and microbial growth faster than it would in a drier climate. A fouled coil forces your system to run longer to hit the same setpoint. In a converted loft near the Williamsburg waterfront, we routinely pull coil debris that has cemented itself to the fins with salt-laden humidity. We clean the coil with professional-grade equipment, then photograph the result so you can see the difference between clean fins and what was there before.
Air Handler Cleaning
The air handler is the cabinet housing the blower, coil, and often the filter. In Brooklyn’s pre-war buildings, these units are frequently squeezed into closets, above dropped ceilings, or into basement mechanical rooms with poor drainage. That tight installation makes cleaning harder, not easier, and it’s where residential-only protocols fail. Our techs work the full interior of the handler, removing accumulated debris from the drain pan to the coil housing. In Crown Heights brownstone retrofits, we see drain pans holding standing water through the summer, which feeds microbial growth that a simple filter change never touches.
Blower Cleaning
The blower wheel is a squirrel-cage fan that moves air through your system. When it loads up with dust and grime, airflow drops and the system works harder. In Bedford-Stuyvesant row houses with retrofit ducting, the blower often runs against undersized return ducts, which means it pulls harder and clogs sooner. We remove the blower assembly when accessible, clean the wheel and housing, and reinstall it with the airflow verified. A dirty blower is one of the most common causes of “the system runs but the rooms don’t cool” calls we get in Brooklyn’s summer months.
Condenser Cleaning
The condenser is the outdoor unit, usually on a roof, balcony, or in a rear yard behind a brownstone. In Brooklyn, condensers sit in some punishing locations: street-facing yards off busy avenues, flat roofs with direct sun, air shafts with poor airflow. Salt air near Brighton Beach and Coney Island accelerates corrosion on aluminum fins. We clean the coil, clear the surrounding area of debris, and check refrigerant line insulation. A condenser caked with city grime and salt spray runs hotter and draws more power. This is one service where Brooklyn’s environment makes a measurable difference in how often cleaning is actually needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Brooklyn
We service all major residential HVAC brands, and we run professional-grade equipment our customers can research before we arrive. That includes Rotobrush and Nikro agitation and extraction tools, Guardsman coil-cleaning chemistry, and Honeywell filter and IAQ components where a system upgrade makes sense. We don’t stock every part for every brand on the truck, but our Brooklyn jobs are scheduled with the specific equipment loaded the night before, based on what you tell us about your system. That means fewer return trips and a faster job for co-ops and condos where building access is tightly scheduled.
If you’re in a building with a specific access window, tell us when you book. We plan around it.
Common HVAC Cleaning Problems We See in Brooklyn Homes
- Slim-duct retrofits packed with debris. When a brownstone owner installs central air in a building built for steam heat, the duct runs get squeezed around risers, joists, and original masonry. Low-clearance bends trap debris that a standard residential cleaning protocol never reaches. We see this constantly in Park Slope and Carroll Gardens retrofits.
- Salt-corrosion and mold in coastal basement runs. Homes near Brighton Beach, Sheepshead Bay, and Coney Island sit in salt-laden air year-round. Duct seams corrode, and the persistent humidity in below-grade runs promotes mold colonization faster than inland neighborhoods. A fogging “sanitiser” without source removal just seals moisture into the debris. We remove the debris first.
- Industrial contamination in converted factory lofts. Williamsburg, DUMBO, and Bushwick loft conversions often repurposed original factory ventilation for residential HVAC. These steel ducts spent decades collecting metal shavings, solvent residue, and industrial dust before the buildings were rezoned. Standard residential protocols are not designed for this contamination profile.
- Post-war tower systems that haven’t been touched in years. Many NYCHA and post-war co-op buildings have central or semi-central HVAC that hasn’t seen a documented cleaning in a decade or more. Filters get changed, but the coil, blower, and supply runs accumulate years of fine particulate. Residents in these buildings often assume poor airflow is just the way the building is. It isn’t.
Pricing for HVAC Cleaning in Brooklyn, NY
A full HVAC cleaning in Brooklyn runs $425-$780 for a single system, covering the evaporator coil, blower, and air handler. The range reflects building type more than anything else. A standard post-war co-op unit with accessible mechanicals sits at the lower end. A brownstone retrofit with slim ducts and tight clearances runs higher because the work takes longer. A Williamsburg loft conversion with original industrial ducts that need heavy source removal sits at the top.
| Service | Brooklyn Price Range |
|---|---|
| Evaporator Coil Cleaning | $150-$275 |
| Blower Cleaning | $125-$225 |
| Air Handler Cleaning (full cabinet) | $225-$400 |
| Condenser Cleaning | $120-$200 |
| Full System Clean (coil, blower, handler) | $425-$780 |
Every price is delivered in writing before work starts. No per-vent pricing. No “discovered” problems after the van arrives. The price we quote is the price you pay, backed by the written warranty on the job record.
Tomas Reyes set this policy because Brooklyn customers have seen the bait-and-switch too many times. You’ll get a written scope, a written price, and a photographed record of every duct run when the crew leaves.
We Also Serve Cities Near Brooklyn
Our Brooklyn crews also handle HVAC Cleaning in Brooklyn‘s neighboring communities, including Manhattan, Astoria, Elmhurst, and Staten Island. If you’re in one of those areas, scheduling works the same way: written price first, photo record after. For anything related to the full scope of what we do, see our HVAC Cleaning service page.
Serving Brooklyn, NY - Our Local Coverage Area
We’re based in the Brooklyn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Brooklyn
Most pre-war brownstones and row houses in neighborhoods like Park Slope, Bedford-Stuyvesant, Crown Heights, and Carroll Gardens were built for steam or hot-water heat and have no central ductwork at all. If your heat comes from radiators and your cooling comes from window units, you don’t have ducts to clean, and we’ll tell you that before scheduling anything. If a company sells you duct cleaning on a radiator-heated brownstone, walk away. Where forced-air HVAC does exist in pre-war buildings, it’s almost always a retrofit, and those slim ducts need a different cleaning approach than suburban systems. Call (806) 606-6902 and describe your setup, and we’ll tell you honestly whether a cleaning makes sense for your building.
A genuine source removal clean removes the debris itself: the dust, the salt-corroded metal particles, the microbial growth that’s living in the moisture held against the duct surface. A fogging treatment deposits a coating on top of whatever is already there. In a humid Brighton Beach basement run, that coating can seal moisture into the debris and make the problem worse over time. We use negative-pressure extraction and agitation tools to pull material out, then photograph the results. Fogging alone is something we do not sell as a substitute for cleaning, because in Brooklyn’s coastal humidity it isn’t one.
Usually not. Original factory ventilation ducts in converted Williamsburg and Bushwick lofts can carry decades of metal shavings, solvent residue, and industrial dust. Standard residential agitation tools can drive that contamination deeper into the system instead of removing it. That’s why every CleanRun job in these buildings starts with a camera inspection. We identify what’s actually inside the ducts before choosing the extraction approach. Our techs recently camera-inspected a repurposed factory duct run in a Williamsburg loft conversion and found sheet-metal supply and return ducts lined with decades of metal shavings and solvent residue. After HEPA-filtered negative pressure and agitation tools on the evaporator coil and blower motor, airflow recovered enough that the owner stopped running two portable dehumidifiers.
Every three to four years is a reasonable interval for a converted loft near the Brooklyn waterfront, and that’s more frequent than what we’d recommend for an inland home. Salt-laden humidity accelerates corrosion inside sheet-metal ductwork, and the moisture supports microbial growth that returns faster than it would in a drier environment. If you run your system year-round for heating and cooling, check the visible supply registers every six months. If you see dust accumulation or a musty smell when the system starts, schedule a camera inspection. If the registers look clean and the airflow is strong, you may not need a cleaning yet. Call (806) 606-6902 and we’ll help you decide based on your actual building, not a generic maintenance calendar.
No. A high MERV filter traps more particles before they enter the system, and that’s genuinely useful in a city with Brooklyn’s air quality, but it doesn’t stop everything. Moisture still condenses on the coil in humid weather. Dust still accumulates on the blower wheel. Microbial growth still forms in the drain pan and on wet coil surfaces. A filter protects the air stream; it doesn’t clean the components the air passes over. The right comparison is this: a good filter slows the rate of contamination, but it doesn’t eliminate the need for periodic cleaning, especially in coastal neighborhoods where humidity is the driving factor.
If you’re in Brooklyn and want a written price for your actual system, call (806) 606-6902. We’ll tell you honestly whether your building needs the work, what it will cost, and what you’ll see in the photo record when we’re done.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Brooklyn since 2013.