HVAC Cleaning in Brushy Creek - One Flat Price, Before-and-After Photos

Fast, Reliable HVAC Cleaning Across Brushy Creek

HVAC cleaning in Brushy Creek typically costs $350-$650 for a full system with documented before-and-after photos, depending on how many duct runs your home has and how much debris has accumulated since it was built. If your home sits in one of the 1990s-era subdivisions off Great Oaks Drive or Brushy Creek Road, the odds are good that the original flex ductwork has never been deep-cleaned. Our crews work these neighborhoods weekly, and that familiarity means we arrive knowing what to expect in a Williamson County attic before we even open the hatch. We’re CleanRun Air Duct Cleaning, and we do one thing here: clean HVAC systems properly, with a written price before work starts and a photo record of every duct run when we leave. Call (806) 606-6902 if you want that kind of documentation.

Call (806) 606-6902

Why CleanRun Air Duct Cleaning Is Brushy Creek’s Preferred HVAC Cleaning Company

We don’t ask Brushy Creek homeowners to take our word for anything. We hand them a camera feed and a written report instead. Since 2013, CleanRun has built its reputation in this market on a simple principle: show the customer what’s inside their ducts, photograph it before and after, and put the price in writing before a single panel comes off. The 365-Day Done Right Promise means exactly what it says. If the cleaning wasn’t done right, we make it right. In writing, on every job, not as a marketing slogan subject to manager moods.

Brushy Creek homeowners ask us the same question on nearly every call: how do I know you actually cleaned something? The answer is Haven Standard Clause 2, the Documented Photo Record. We photograph the interior of every duct run before cleaning and after. You’ll see the return plenum, the supply trunk, and the branch runs from inside, on a screen, with our technician standing next to you explaining what the camera found. A 3-inch layer of compacted drywall dust and cedar pollen doesn’t argue with a photo.

Our crews are background-checked, uniformed, and identified by name before they step onto your property. That’s Haven Standard Clause 3, and it’s not decorative. Tomas Reyes, who leads CleanRun’s operations, has built his crews around the same standard he’d expect if someone were working inside his own home. The equipment we run is professional-grade: Rotobrush and Nikro for source removal, Abatement Technologies for negative-pressure containment when a job calls for it. You can look those brands up yourself before you ever agree to a price.

Our HVAC Cleaning Services in Brushy Creek

What we call HVAC Cleaning is really a set of distinct services, each targeting a specific component of your system. In Brushy Creek’s housing stock, built largely between 1990 and 2005, three areas fail most predictably: the evaporator coil, the blower assembly, and the air handler. Here’s what each involves.

Evaporator Coil Cleaning

Your evaporator coil sits above the furnace or inside the air handler and does the actual cooling work. In Brushy Creek, where summers run hot and humid from May through September, the coil stays wet for months at a time. That moisture grabs whatever the filter missed, and if the previous owner swapped the builder’s 4-inch pleated filter for a $4 fiberglass panel, that means two decades of cedar pollen, live-oak catkins, and limestone construction dust. A fouled coil drops efficiency by 10 to 20 percent and pushes your compressor harder. We clean it with a foaming cleaner rated for coil metals, then photograph the result.

Blower Cleaning

The blower motor pushes conditioned air through your supply ducts. When dust and pollen cake onto the blower wheel’s blades, the motor works harder to move the same airflow, runs hotter, and burns out sooner. In 1990s-era Brushy Creek homes, we routinely find blower cages loaded with a gray-brown paste of duct debris and humidified dust. Cleaning the blower restores proper static pressure and reduces the load on a component that’s likely already past its prime. It’s a two-hour job that saves a $600 motor replacement.

Condenser Cleaning

The condenser is the outdoor unit. In Brushy Creek, it sits in a yard ringed by live oaks and Ashe junipers. Cottonwood seed, cedar pollen, grass clippings, and construction dust from neighboring homes all pull through the coil fins. A dirty condenser coil runs hotter head pressures and shortens compressor life. We remove the outer cabinet, flush the fins from inside out with the correct pressure, and clear the surrounding area so the unit can breathe. If you’ve never had this done since you bought the house, it’s overdue.

Air Handler Cleaning

The air handler is the box that houses the blower, the evaporator coil, and often the filter rack. In Brushy Creek, most air handlers sit in unconditioned attics that hit 140°F by mid-July. Flex duct connected to those air handlers sags at hanger points and creates debris traps. We open the handler cabinet, clean the interior surfaces, the coil, the blower assembly, and the drain pan, then check the condensate line for the sludge that breeds in Central Texas humidity. A clogged drain line is the number one cause of water damage around Brushy Creek air handlers.

Before

After

Trusted Brands We Service in Brushy Creek

Your system carries a brand name, and we service the ones most common in Brushy Creek’s production-built homes: Trane, Carrier, Lennox, Goodman, Rheem, and American Standard. We also service and install Aprilaire and Honeywell filtration upgrades, which matter in this specific ZIP code because of the cedar pollen load we see every winter. If you’d rather improve filtration than replace the whole system, we’ll show you what a MERV 11 or MERV 13 cartridge can do against cedar pollen versus the 1-inch fiberglass panels we find in half the homes we clean. The brand names on our equipment roster, Guardsman, Rotobrush, and Nikro, are the same ones you’ll see on commercial job sites.

Common HVAC Cleaning Problems We See in Brushy Creek Homes

• Construction dust in “new” homes. Builders in Brushy Creek’s fastest-paced subdivisions often run the HVAC system during final trim work to keep crews comfortable. That pulls drywall dust and texture overspray into supply and return ducts before the keys change hands. Your “new” home can start its life with a quarter-inch of gypsum dust in the trunk line.
• Cedar pollen loading in returns. Brushy Creek sits at the edge of the Ashe juniper belt, and December through February brings pollen counts that hit the top of North American charts. Low-MERV fiberglass filters let that fine particulate coat every return-air grille and duct interior within a single season. We see it every January.
• Flex-duct sagging and debris traps. Flex duct in attics that hit 140°F sags between hanger straps. The inner liner degrades, the duct belly traps debris, and airflow drops. A visual inspection won’t catch it. Camera scoping will.
• Builder-grade filter swaps gone wrong. The original 4-inch pleated filters spec’d by builders get replaced with $4 fiberglass panels because homeowners don’t want to spend $18 four times a year. Two decades later, the supply trunk line carries a silt layer of everything those cheap filters let through.

Pricing for HVAC Cleaning in Brushy Creek, TX

We Also Serve Cities Near Brushy Creek

Our crews work throughout central Texas. In addition to HVAC Cleaning in Brushy Creek, we serve homeowners in Houston, San Antonio, Dallas, and Austin. Dispatch and scheduling are coordinated from our Austin office, and crews serve Brushy Creek locally, which means the same written-price standard applies no matter which city shows up on the invoice. If you’re in one of those metros and need the same documented, photo-backed cleaning, call the same number: (806) 606-6902.

FAQs - HVAC Cleaning in Brushy Creek