Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Burbank
HVAC cleaning in Burbank isn’t the same job it is two cities over. Homes here sit under the Hollywood Burbank Airport flight paths, and the ultrafine carbon particles from jet exhaust settle into ductwork faster than in Glendale or Studio City. Add the Verdugo Mountains trapping San Fernando Valley heat, and your evaporator coil and blower work harder, longer, and dirtier than most Southern California systems. CleanRun Air Duct Cleaning has cleaned systems across Burbank’s Rancho, Magnolia Park, and the Glenoaks corridor, and we document every duct run before and after with a camera. Call (806) 606-6902 and we’ll give you a written price before any panel comes off.
Why CleanRun Air Duct Cleaning Is Burbank’s Preferred HVAC Cleaning Company
Burbank homeowners tend to research before they call. They want to see what’s inside the ductwork, not hear a pitch about what might be there. That matches how we work. Since 2013, CleanRun has served over 52,000 homes, and every single one got a written price before work started and a documented photo record when the crew left. Tomas Reyes, who leads our team, holds every job to that standard. No exceptions.
Our Burbank customers get the same thing. A background-checked, uniformed technician arrives with professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies. They photograph the inside of every duct run before cleaning begins. You see the debris, the disconnected joints, the fire ash, or the airport soot, and then you see it gone. That’s Haven Standard Clause 1: written price before any work starts. It’s not a marketing slogan. It’s the operating rule.
Our HVAC Cleaning Services in Burbank
Our HVAC Cleaning team handles the full system, not just the parts you can see from the hallway. In Burbank’s housing stock, built largely in the 1940s through 1960s for Lockheed and early entertainment workers, the mechanical systems are often original. That means the work scope here is different than in newer developments. Here’s what we address most often.
Evaporator Coil Cleaning
The evaporator coil sits inside the air handler, right where cooled air passes over it. In Burbank, that coil also collects whatever the Verdugo heat trap and airport air bring in. A fouled coil reduces cooling capacity and forces the system to run longer. We remove the coil, clean it with professional-grade treatments, and photograph the difference. A typical evaporator coil cleaning in Burbank runs $180 to $430, depending on access and buildup.
Blower Cleaning
The blower wheel pushes all your conditioned air through the house. When it’s caked with dust and particulate, the system loses airflow and the motor works harder. In older Burbank homes, especially in Rancho where original ductwork is common, blower wheels can carry years of compacted debris that a basic filter change never touches. We pull the blower assembly, clean the wheel and housing, and document it. Blower cleaning in Burbank typically runs $150 to $320.
Condenser Cleaning
Your outdoor condenser unit sits through Burbank’s summer heat and Santa Ana dust events. Fins clogged with Mojave dust and smog residue force the compressor to overheat. We clean the condenser fins, clear the surrounding area, and check refrigerant lines for obvious leaks. For Burbank homes in the flatlands south of the 134, where dirt and airport particulates settle heavily, condenser cleaning runs $120 to $250.
Air Handler Cleaning
The air handler is the indoor unit that houses both the blower and the evaporator coil, plus the filter rack and often the heat exchanger in gas systems. In Burbank’s older condo buildings, especially along the Glenoaks corridor, air handlers can be in tight closets with restricted access. We clean the full housing, the coil, the blower, and the drain pan, and we treat the coil to prevent microbial growth. Air handler cleaning in Burbank runs $280 to $550.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Burbank
Burbank homes carry a mix of system brands depending on when the HVAC was installed. We service equipment from Honeywell and Aprilaire among others, and our technicians know how to clean these systems without damaging sensors or control boards. Because we maintain a parts inventory for common Burbank installations, we can often complete repairs and cleaning in a single visit. If you have a Guardsman-protected system or a Honeywell thermostat controlling an older air handler, our crew will work within manufacturer specifications and document the work before and after.
Common HVAC Cleaning Problems We See in Burbank Homes
- Airport soot accumulation. Homes in Magnolia Park and south of the airport collect ultrafine carbon particulate from jet exhaust. This isn’t ordinary household dust; it requires HEPA filtration and agitation tools to remove properly. Standard shop-vac methods leave it behind.
- Original 1950s-1960s metal ductwork. Large portions of Rancho and Magnolia Park still run on original ducts. We routinely find disconnected joints in unconditioned attics, deteriorated insulation, and decades of compacted debris that no filter change ever addressed.
- Santa Ana dust infiltration. Wind events funneling through the Newhall Pass push fine Mojave dust into Burbank homes in a single day. If your filtration wasn’t up to it, that dust is now inside your ducts and cycling through every room.
- Shared wall-stack contamination in condos. Burbank’s older apartment and condo buildings often share dryer vent stacks. One unit’s clogged vent can push lint into a neighbor’s HVAC return, which is why cleaning one unit sometimes doesn’t solve the problem. The whole stack has to be addressed.
Pricing for HVAC Cleaning in Burbank, CA
Here’s what you should expect to pay for HVAC cleaning in Burbank right now. A full system cleaning, covering the air handler, evaporator coil, blower, and condenser, typically runs $480 to $900 depending on home size, access, and the condition of the ductwork. Coil treatment alone runs $110 to $200. Blower cleaning runs $150 to $320. These aren’t teaser prices. They’re the written price you get before work starts, every time. What changes the number is access: homes with rooftop condensers, tight air handler closets, or long unconditioned attic runs take more labor. What doesn’t change it is a surprise invoice after the work. Haven Standard Clause 1 means the number we give you is the number you pay. Call (806) 606-6902 and we’ll walk you through the scope and the written price before scheduling.
We Also Serve Cities Near Burbank
Our crews serve Burbank and the surrounding communities, including Glendale, North Hollywood, Universal City, and Tujunga. If you’re just over the city line, the same written pricing and documented photo record applies. Learn more about our HVAC Cleaning in Burbank service area or call for a written estimate.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Burbank
Yes. Homes directly beneath Hollywood Burbank Airport flight paths accumulate aviation particulates, ultrafine carbon particles from jet exhaust, at a measurably faster rate than homes in Glendale or Studio City. We typically recommend Burbank homes in Magnolia Park and south of the 134 have their systems inspected every 2 to 3 years, compared with 3 to 5 years for lower-particulate areas. The difference is visible on camera. Call (806) 606-6902 to schedule an inspection and get a written price.
Magnolia Park’s narrow streets and limited driveway space make it hard to position a large negative-pressure truck close to the home. Some crews solve that by skipping proper source removal and just vacuuming what they can reach from the register. That leaves debris in the duct runs. Our equipment is configured for tight Burbank access, and we don’t cut corners on source removal. The photo record proves it was done.
Yes, especially in older Burbank buildings with shared wall stacks. If a neighboring unit’s dryer vent is clogged, lint can back up into the shared stack and enter your HVAC return. That’s why one unit’s cleaning sometimes doesn’t solve the problem. If you’re in a condo along the Glenoaks corridor, ask us to camera-inspect the stack and identify whether the whole run needs cleaning.
Smoke and ash from the 2017 La Tuna Canyon Fire infiltrated many north Burbank duct systems, particularly in homes on Providencia, Scott Road, and adjacent streets. In older flex duct systems that were never cleaned after the fire, fire-event debris sits layered inside the duct walls. When the AC runs, it re-releases that burnt odor. A camera inspection shows it, and source removal with HEPA filtration gets it out. Call (806) 606-6902 to find out what’s actually in your ducts.
Burbank sits in a microclimatic heat pocket where the Verdugo Mountains block ocean breezes and trap Valley heat. Summer highs routinely run 10 to 15 degrees hotter than coastal LA, so your system cycles harder and longer than a comparable home in Studio City. That means the evaporator coil loads up with more particulates from airport air and smog, and it needs cleaning more often. A typical Burbank evaporator coil cleaning runs $180 to $430.
What Makes Burbank’s HVAC Cleaning Different
Burbank’s residential neighborhoods sit directly under Hollywood Burbank Airport flight paths. That’s one of the few major commercial airports in Southern California with runways surrounded on all sides by dense housing. The flatlands south and east of the airport, particularly around Magnolia Park and the Glenoaks corridor, accumulate fine aviation particulates at rates that distinguish them from Glendale or Studio City. When you combine that with the Verdugo Mountains trapping heat and smog, HVAC systems in Burbank cycle these contaminants through living spaces almost continuously during the summer months. Source removal per NADCA standards isn’t optional here; it’s the only cleaning method that actually works.
We recently cleaned a 1958 ranch home in Magnolia Park where the original supply and return ducts had never been replaced. Our camera inspection showed disconnected joints in the attic and decades of compacted debris, plus a layer of fine black particulate consistent with airport soot. After source removal with HEPA filtration and agitation tools, we resealed the joints and treated the evaporator coil. The homeowner noticed the system no longer pushed a kerosene odor in the first week after cleaning. That’s the job, and it’s the job we do in Burbank every week.
Burbank’s Housing Stock and What It Means for Your System
Much of Burbank’s residential stock was built in the 1940s through 1960s to house Lockheed Aircraft and early entertainment-industry workers. That leaves large swaths of the Rancho and Magnolia Park neighborhoods with original metal ductwork that has never been replaced. These aging systems frequently show deteriorated insulation, disconnected joints in unconditioned attic spaces, and decades of compacted debris. Homes that have changed hands without major mechanical updates are especially likely to need more than a basic cleaning. The blower wheel, the coil, and the ducts themselves need to be brought back to a clean baseline. Our camera inspection shows you exactly what’s there before we touch anything.
Get a Written Price for HVAC Cleaning in Burbank
If you live in Burbank and your system smells stale, runs constantly, or hasn’t been cleaned in years, we’ll give you a written price before any work starts. No per-vent pricing. No bait-and-switch. Just a documented scope, a written number, and a photo record when the work is done. Tomas Reyes and the CleanRun team serve Burbank locally, with scheduling coordinated from our Los Angeles office. Call (806) 606-6902 today and find out what’s actually in your ducts.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Burbank since 2013.
HVAC Cleaning in Nearby Areas