Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Burke
HVAC cleaning in Burke, VA is not a one-size-fits-all job. Most homes here were built between 1977 and 1990 as part of the Burke Centre planned community, and their original fiberglass duct board is now 35 to 45 years old. That means a cleaning crew has to know exactly what they’re looking at before any tool goes into the ductwork. We do. Our technicians serve Burke daily and carry camera inspection equipment on every van, because older duct board simply can’t be treated like sheet metal. If you need HVAC cleaning in Burke, call (806) 606-6902 and we’ll give you a written price before any work begins.
Why CleanRun Air Duct Cleaning Is Burke’s Preferred HVAC Cleaning Company
Burke homeowners call us because we’ve built a reputation for showing our work. Every HVAC Cleaning job we complete includes a documented photo record of inside every duct run, before and after. That’s not a marketing add-on. It’s been standard practice since Tomas Reyes founded the company in 2013, and we’ve since documented over 52,000 homes under the H.A.V.E.N. Standard. In Burke specifically, that photo record matters more than in most neighborhoods, because the duct board we encounter here often needs a judgment call: clean it gently, or recommend replacement.
Our crews know the streets. We work regularly in Burke Centre, along Shiplett Boulevard, Roberts Parkway, and around the Pohick Regional Library area. We know what a 1983 split-level off Oak Leather Drive looks like inside its return plenum. That local repetition means we arrive knowing what we’re likely to find, which makes the job faster for you and less likely to surprise anyone.
Every technician is background-checked, uniformed, and identified by name before arrival. Equipment comes from trade-recognized brands like Rotobrush and Nikro, not rental-shop vacuums. And the 365-Day Done Right Promise applies in writing on every Burke job, without exception.
Our HVAC Cleaning Services in Burke

We focus on the parts of your system that actually determine whether the air you breathe is clean.
Evaporator Coil Cleaning
This is the single most important service for Burke homes. Northern Virginia’s summer humidity routinely pushes past 75%, and that moisture condenses on the evaporator coil constantly. Within a few seasons, the coil develops a biofilm that feeds on dust, pollen, and pet dander. You can clean every duct in the house and still blow musty air if the coil is dirty. We remove the access panel, photograph the coil, clean it with the correct solvent, and photograph it again. On a 1980s Burke Centre system, this often takes longer than the duct work itself. Typical cost in Burke: $180 to $340, depending on access and the level of buildup.
Blower Cleaning
The blower wheel in an older Burke HVAC system collects a fine layer of debris that reduces airflow and throws the system out of balance. In homes with original condensers and furnaces, a dirty blower can make a 5-degree difference in upstairs rooms, simply because less air is moving. We clean the blower wheel, check the motor mounts, and document the before-and-after airflow reading. Blower cleaning in Burke usually runs $120 to $220 when done as part of a full system clean.
Condenser Cleaning
The outdoor condenser coil on Burke homes takes a beating from pollen, grass clippings, and the cottonwood that blows through Northern Virginia each spring. A clogged condenser forces the compressor to run hotter and longer, which means higher electric bills and eventual failure. We clean the coil fins carefully, clear the surrounding area, and record the pressure readings before we start and after we finish. Condenser cleaning in Burke typically costs $120 to $200.
Air Handler Cleaning
In Burke’s split-level and colonial homes, the air handler is often tucked into an unconditioned attic or crawl space. That means the cabinet itself sweats during humid summers, pulling dust and insulation fibers into the airflow. We clean the cabinet interior, the drain pan, and the coil within the handler, then treat the pan with an anti-microbial. Air handler cleaning in Burke runs $150 to $280.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Burke
We service every major HVAC brand you’ll find in Burke homes: Carrier, Trane, Lennox, Rheem, Goodman, and York. Because our crews are in Burke regularly, we keep common parts for these systems on the truck. That means fewer return trips and less downtime for you. Our equipment is professional-grade and names you can verify independently. That includes Abatement Technologies HEPA-filtered negative air machines, Rotobrush source-removal systems, and Guardsman coil treatments. We don’t use hardware-store vacuums and we don’t pretend a Shop-Vac is a duct cleaner.
Common HVAC Cleaning Problems We See in Burke Homes

Here’s what we actually find when we open up systems in Burke:
– Fiberglass duct board delamination. The inner liner on 1980s-era duct board breaks down after four decades of humidity cycling. We see this most often in original Burke Centre homes, where the liner has begun shedding or sagging into the airflow. It requires camera inspection before any agitation, or you risk pushing fiberglass into the living space.
– Crushed or disconnected runs in crawl spaces. Split-level homes throughout Burke were built with flexible or rigid ducts run through low crawl spaces. Rodents, past contractors, and simple settling take a toll. We regularly find runs that have collapsed entirely, so air never reaches the farthest rooms.
– Matted pollen in return-air plenums. The return side of Burke systems clogs with oak, cedar, and grass pollen every spring. After a few years, the plenum lining looks like felt. This is a common source of “the whole house still smells dusty” complaints even after a basic cleaning.
– Biofilm on evaporator coils. Humid summers plus neglected filter changes equal a coil coated in microbial growth. We see this constantly in Burke homes that run the AC from May through September without cleaning the coil.
Pricing for HVAC Cleaning in Burke, VA
We Also Serve Cities Near Burke

Beyond Burke, our crews cover Annandale, Oakton, Reston, and Centreville. If you’re in a neighboring community and dealing with the same aging duct board and humidity-driven coil issues, we bring the same written pricing, photo documentation, and 365-Day Done Right Promise. HVAC Cleaning in Burke is our home base for the western Fairfax County area.
Serving Burke, VA - Our Local Coverage Area
We’re based in the Burke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Burke

Burke Centre was built in the early 1980s. How do I know if my original fiberglass duct board is safe to clean, or if it’s already degrading?
You can’t know without a camera inspection, which is exactly why we do one before any cleaning in Burke homes of that era. We run a camera into the main supply and return runs before touching anything. The inspection shows whether the inner liner is intact or has begun to delaminate. If the liner is intact, fiberglass duct board can be cleaned safely with negative-pressure, low-agitation methods. If the liner is breaking down, cleaning it will only make the shedding worse, and we’ll tell you that in writing with photos of what we saw. Call (806) 606-6902 and we’ll schedule the camera work.
Why does my 1985 split-level in Burke feel dusty again just months after the ducts were cleaned?
Because either the evaporator coil was never cleaned, or the return side still holds a matted pollen layer. Most “blow-and-go” cleanings only address the supply ducts. In a Burke split-level, the return plenum is often in the crawl space or a cramped closet space, so crews skip it. Then dust from the return side re-enters the system immediately. We clean both sides and photograph every run, so you know what was actually done. If you had a cleaning elsewhere and the dust returned, ask us for a free second opinion on that written estimate.
Do I need a different cleaning method for fiberglass duct board than for the sheet metal ducts in newer Burke-area townhomes?
Yes. Absolutely. Sheet metal can tolerate high-pressure agitation and rotary brushes. Fiberglass duct board cannot. We use low-agitation, HEPA-filtered negative-pressure machines from Abatement Technologies on fiberglass systems. The approach is slower and gentler, which is why camera inspection matters. If a company shows up in Burke and immediately shoves a metal brush down your 1984 duct board, tell them to stop.
We’re moving to Fort Belvoir on PCS orders. The home inspection didn’t check ducts. Should we have the HVAC cleaned before we move in?
Yes, and we recommend the camera inspection as part of it. In military-transition homes around Fort Belvoir, many sellers do a quick visual clean to pass a cursory inspection but never look at the actual duct lining. Within a year, the new family starts noticing fiberglass fragments or a persistent dusty smell. We work with incoming military families regularly. You’ll get the full photo record and a written report on the condition of the system, which is useful documentation even if you’re only in the home for two years. Schedule before your household goods arrive, when the house is empty.
My upstairs rooms in Burke are always 5-7 degrees warmer. Is that just a ‘hot upstairs’ thing, or could it be the ducts?
It could be the ducts. Heat rises, but a persistent 7-degree gap in a Burke colonial usually means the supply runs to the upper floor are restricted or crushed. We’ve found everything from collapsed flexible duct in crawl spaces to return runs that were disconnected during a past renovation and never reattached. The only way to know is to camera the runs and check static pressure. Among the homes we’ve serviced on Shiplett Boulevard and around the Burke Centre townhomes, a measurable portion of “hot upstairs” calls turn out to be duct problems, not thermostat settings. Call (806) 606-6902 and we’ll bring the camera.
Contact CleanRun Air Duct Cleaning in Burke, VA
If your Burke home hasn’t had its HVAC system properly cleaned and inspected, we’ll give you a written price and a documented record of everything we find. No per-vent pricing. No upsell pressure. Just evidence of what’s inside your ducts, and a professional recommendation on what to do about it. Every job is backed in writing by the 365-Day Done Right Promise. Call (806) 606-6902 for a free estimate, or to schedule a camera inspection before any work starts.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Burke and Northern Virginia since 2013.




Before
After
Before
After