Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Flower Mound
HVAC cleaning in Flower Mound typically costs $425 to $890 for a full system on a 3,000 to 4,500 sq ft home, with evaporator coil cleaning adding $180 to $340. Most jobs take four to six hours and include photo documentation of every duct run before and after. If you’re off FM 2499, Morriss Road, or in Wellington or Bridlewood, we’re your local crew. Call (806) 606-6902 for a written price before any work starts.
We know Flower Mound homes because we work in them every week. The 1990s and early 2000s master-planned communities here weren’t built like the tighter, smaller houses in Lewisville or older Denton stock. They’re large, two-story, brick-clad, and full of flex-duct runs snaking through unconditioned attics that hit 150°F every July and August. That specific combination creates specific failures, and you’ll read about them below in plain terms.
Why CleanRun Air Duct Cleaning Is Flower Mound’s Preferred HVAC Cleaning Company
CleanRun Air Duct Cleaning is independently owned and operated under the Haven Standard, established in 2013. We’ve served more than 52,000 homes, every single one with a written price before a panel came off and a documented photo record when the crew left. That’s not a sales line. It’s Clause 1 of the Haven Standard: written price before any work starts, every time.
Flower Mound homeowners tend to research before they call. They want to see what’s inside their ducts, not just hear a technician’s summary. So we photograph every run, before and after, and hand you the record as part of the standard job. If something isn’t right, the 365-Day Done Right Promise means we make it right. In writing. Not subject to a manager’s mood.
Tomas Reyes leads our team. When we schedule a Flower Mound job, the technicians who arrive are background-checked, uniformed, and identified by name before they step inside. Our crews serve Flower Mound locally, with dispatch coordinated from the brand’s Dallas-Fort Worth office. You’ll see the same crew if we come back for a warranty visit.
Our HVAC Cleaning Services in Flower Mound
Evaporator Coil Cleaning
Evaporator coil cleaning in Flower Mound runs $180 to $340 depending on access. In Wellington and Bridlewood homes built between 1988 and 2010, coils sit inside air handlers that often require partial disassembly to reach. A coil caked with dust and pollen forces your compressor to work harder and freezes up more often. We clean the coil in place using professional-grade equipment from Abatement Technologies and Guardsman, then photograph the result.
Air Handler Cleaning
Air handler cleaning in Flower Mound costs $150 to $275 and includes the blower housing, blower wheel, and interior cabinet surfaces. Homes along FM 1171 with multi-zone systems often have air handlers in the attic, where dust and blown insulation accumulate around the unit. A dirty blower wheel can reduce airflow by 15 to 20 percent. We clean it, photograph it, and show you the difference.
Blower Cleaning
Blower cleaning in Flower Mound is typically $120 to $220. The blower wheel in a 3,500 sq ft home moves roughly 1,200 to 1,600 cubic feet per minute of air through the system. When the wheel blades are coated with a quarter-inch of baked dust, static pressure rises and rooms get uneven airflow. This is one of the most common findings on Flower Mound jobs, especially in two-story homes where the blower has been cycling against dirty filters for years.
Condenser Cleaning
Condenser cleaning in Flower Mound runs $95 to $160. The outdoor unit sits in North Texas heat, pollen, and cottonwood debris from April through October. A clogged condenser coil raises head pressure and shortens compressor life. We wash the coil, clear the fins, and check the surrounding clearance. It’s quick, but it matters more here than in most climates because Flower Mound summers are relentless.
Coil treatment is a separate service we recommend on older Flower Mound systems. After cleaning, we apply a manufacturer-approved coil treatment to slow re-soiling. Honeywell and Aprilaire offer treatments we’ve used on hundreds of local systems. Expect to add $60 to $110 for this step.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Flower Mound
We work on all major HVAC brands and use professional-grade equipment from HVAC Cleaning suppliers you can look up independently: Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman. For Flower Mound customers, that means the tools we bring into your home are the same ones used by commercial duct cleaning firms, not a shop vac from a hardware store. If you have a Honeywell media cabinet or an Aprilaire air cleaner integrated into your system, we service those as well.
Common HVAC Cleaning Problems We See in Flower Mound Homes
- Delaminating flex-duct mylar liners: Original flex duct installed in 1990s and early 2000s homes along FM 2499 and FM 1171 has been cycling through 150°F attic heat for 25 to 30 years. The inner mylar liner begins to peel and shed fibrous particles directly into the airstream. This is the single most common defect we document in Flower Mound’s boom-era housing stock, and it requires more than a cleaning to fix.
- Stuck multi-zone dampers: In 3,000 to 4,500 sq ft two-story homes with multiple zones, the dampers that route air upstairs and downstairs can stick partially closed. That causes uneven airflow, hot upstairs rooms, and baked-on dust on the evaporator coil. We check damper operation during every HVAC cleaning service in Flower Mound.
- Crushed return-air drops: Return flex runs in attics get walked on by cable installers, pest control techs, and homeowners storing holiday decorations. When a return drop collapses, the blower starves for air and pulls debris from unconditioned spaces. We find crushed returns often in Bridlewood homes where attic walkways cross duct runs.
- December-February Ashe juniper pollen load: Flower Mound sits in the Cross Timbers ecoregion, and winter mountain cedar pollen here is among the heaviest in Texas. That counter-seasonal pollen surge settles inside duct systems during months when HVAC cleaning demand is typically slow elsewhere. Homeowners who schedule a cleaning in February often find their ducts lined with a fine gray-green pollen film.
Pricing for HVAC Cleaning in Flower Mound, TX
A full HVAC cleaning in Flower Mound, covering the supply and return duct runs, plenum, evaporator coil, blower, and air handler, typically runs $425 to $890. Larger homes in Wellington, Bridlewood, and other master-planned communities on the east side of FM 2499 trend toward the top of that range because they simply have more linear feet of duct. Evaporator coil cleaning runs $180 to $340. Blower cleaning runs $120 to $220. Condenser cleaning runs $95 to $160. Coil treatment adds $60 to $110.
What changes the price is linear footage and access, not how dirty the ducts look. A 4,200 sq ft two-story with attic-mounted air handlers and long flex runs costs more than a 2,800 sq ft single-story. We give you one flat price for the whole system before work starts. No per-vent pricing, no upsell after the van is in the driveway. Haven Standard Clause 1.
Call (806) 606-6902 for a written quote. If you have a competitor’s estimate, we’ll put our number next to it in writing, free. That’s the Free Second Opinion on Any Written Estimate, and it costs you nothing.
We Also Serve Cities Near Flower Mound
Our crews serve Flower Mound and the surrounding communities of Southlake, Grapevine, Lewisville, and Coppell. If you’re in a neighboring city, the same written-price guarantee and photo documentation applies. Scheduling is coordinated from our Dallas-Fort Worth office, and we dispatch local crews to all of these areas weekly.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Flower Mound
Homes built between roughly 1988 and 2005 in Flower Mound’s master-planned subdivisions used flex-duct that is now 20 to 30 years old, and flex-duct inner liners degrade with repeated exposure to 150°F attic heat. The mylar lining inside the duct begins to delaminate and shed particles, which then circulate through the system. Newer homes use different materials and haven’t yet experienced the same thermal cycling. Call (806) 606-6902 if you suspect your 1990s-era ductwork is shedding.
No. If the mylar liner inside your flex duct has delaminated, cleaning will remove the loose fibers currently in the system, but it cannot restore the liner itself. The duct run needs to be replaced or resealed. In a Bridlewood two-story off Morriss Road, we found original 1998 flex-duct with the liner peeling away inside the supply run, and camera inspection showed fibers drifting into the master bedroom register. We performed full negative-pressure source removal with HEPA filtration, replaced 40 feet of crushed return duct, and sealed the plenum with mastic. That’s the actual fix. We’ll show you the photos before quoting the repair.
Yes, because Flower Mound sits in the Cross Timbers ecoregion and experiences one of the heaviest Ashe juniper pollen loads in Texas from December through February, which is counter-seasonal compared to most of the country. Pollen settles into duct systems and gets recirculated every time the heat runs. If you’re noticing allergy symptoms in winter, your ducts may be holding a pollen film. A cleaning plus coil treatment can help. Call (806) 606-6902 to schedule.
It’s usually a duct defect, often a stuck multi-zone damper or a crushed return drop. In Wellington’s two-story homes, dampers that route air upstairs can stick partially closed after years of thermal cycling, and return flex runs under attic walkways get compressed by foot traffic. Both problems starve the upper floor of airflow. We diagnose both during a standard HVAC Cleaning visit using camera inspection and static pressure readings. Sometimes a cleaning solves it. Sometimes the duct needs sealing or replacement. We’ll show you the evidence before quoting either.
We use negative-pressure extraction, which means we connect a HEPA-filtered vacuum system to the ductwork and create suction that pulls debris into sealed containment, not into your living room. The air handler is placed under negative pressure during the cleaning. We run agitation tools through each duct run while the vacuum is pulling. Our equipment from Abatement Technologies and Nikro is designed specifically for this. Then we photograph every run before and after so you can verify the work. You will see the difference, not just take our word for it.
If you live in Flower Mound and your ducts haven’t been inspected in years, call (806) 606-6902. We’ll give you a written price for the whole system before any work begins. If your duct liner is delaminating, your returns are crushed, or your coils are caked with baked-on pollen, we’ll show you the photos and tell you exactly what it costs to put it right. That’s the whole job.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Flower Mound since 2013.