Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Hammond
HVAC cleaning in Hammond, IN typically runs between $425 and $680 for a full system including evaporator coil, blower, and air handler. Homes within a mile of the Calumet industrial corridor often land at the higher end because the residue demands more aggressive agitation and longer HEPA filtration passes. If you live in a brick bungalow off Calumet Avenue or a frame two-story near Hessville, you already know the dust here is different. It has a reddish tint and a faint oily smell that ordinary vacuuming never removes. We’re CleanRun Air Duct Cleaning, and we’ve been documenting exactly that kind of contamination since 2013. Call (806) 606-6902 for a written price before any work starts.
Why CleanRun Air Duct Cleaning Is Hammond’s Preferred HVAC Cleaning Company
Hammond homeowners don’t need to be told their homes are older. They need someone who knows what those 1920s-1950s duct runs actually look like inside. Our HVAC Cleaning team has pulled rust-colored, petroleum-tainted debris from original galvanized trunks across Robertsdale, Woodmar, and Downtown Hammond that would make a generic duct cleaner’s photos look staged. The difference is our Documented Photo Record: every run, before and after, delivered as part of the job record, not as an upsell.
We operate under the H.A.V.E.N. Standard. Clause 1 is a written price before a single panel comes off. Clause 3 means background-checked, uniformed technicians who tell you their name before they enter your home. Tomas Reyes leads our crews, and the same standards apply whether we’re cleaning a 1,100-square-foot worker’s cottage near Hohman Avenue or a 2,800-square-foot rebuild near Wicker Park. Every job since 2013 has ended the same way: a written record of what was found, what was done, and what it looks like now.
We’re independently owned and operated under the Haven Standard. Dispatch is coordinated from our Indianapolis office, but the crews that serve Hammond are familiar with the housing stock here, from basement supply plenums to the undersized galvanized runs that were common when these homes were built.
- Written price before work starts - always, under Haven Standard Clause 1. No ‘call for a quote’ games.
- Documented Photo Record included - inside every duct run, before and after, on every visit.
- 365-Day Done Right Promise - if the work isn’t right, we make it right. In writing.
- Free Second Opinion - bring a competitor’s written estimate; we’ll put our number next to it.
- Industrial-grade equipment - Rotobrush, Nikro, Abatement Technologies, and Guardsman tools, names you can verify independently.
Our HVAC Cleaning Services in Hammond
Evaporator Coil Cleaning
In Hammond, evaporator coils carry a double burden. The oily petroleum aerosol from the BP Whiting Refinery and legacy steel corridor settles on coil fins and bakes in over a heating season. Standard fiberglass filters can’t stop it. We clean evaporator coils with agitation tools rated for source removal, not just surface dusting, and we photograph the coil before and after so you can see the difference between a clean coil and a coated one. Expect $180-$260 for a typical residential evaporator coil clean in Hammond.
Air Handler Cleaning
The air handler is where Hammond’s specific contamination concentrates: the blower wheel, the housing, and the secondary heat exchanger surfaces all collect the same reddish-orange iron oxide dust that settles in the ducts. We remove the blower wheel when access allows, clean the housing with HEPA-filtered extraction, and treat the surfaces so particulate doesn’t re-adhere within weeks. A full air handler cleaning in Hammond typically runs $220-$340 depending on access and contamination level.
Heat Exchanger Cleaning
We opened a supply register in a 1948 brick bungalow off Calumet Avenue and found the original galvanized trunk line coated in a rust-colored, oily film that had baked into the seams over seven decades. Our camera inspection showed a disconnected run in the basement plenum, so after source removal with agitation tools and HEPA filtration, we sealed the joints and replaced the crushed section. Our techs noted the MERV rating of the home’s filter couldn’t stop the refinery particulate that had accumulated. That’s the reality of many Hammond homes: the heat exchanger surfaces and the ducts around them carry decades of industrial loading. Heat exchanger cleaning in Hammond runs $200-$300, and we recommend it as part of any full system clean.
Condenser Cleaning
Outdoor condenser units in Hammond face a different threat: the same particulate that stains siding and windows also coats condenser fins, reducing heat rejection by up to 30% in severe cases. We flush condenser coils with low-pressure water and coil-safe cleaning compounds before checking refrigerant pressures. A condenser cleaning runs $120-$180 for most Hammond homes, less than the cost of running an inefficient system through another summer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hammond
Most Hammond homes have furnaces and air handlers from the usual major manufacturers, but the air quality equipment matters just as much. We service and clean systems that include Honeywell electronic air cleaners, Aprilaire media filters, and Guardsman UV treatment systems. If your home near the Calumet corridor has a high-efficiency filter that’s been overwhelmed by industrial particulate, we can clean the media housing and recommend a realistic replacement schedule for Hammond conditions, not a generic one. Parts for common Hammond installations are stocked locally, which shortens turnaround when a component needs replacement.
Common HVAC Cleaning Problems We See in Hammond Homes
- Reddish-orange iron oxide dust - a chemical signature of refinery and steel corridor neighbors. It requires aggressive agitation and HEPA filtration, and it returns quickly if the filter media can’t capture sub-micron particulate.
- Oily petroleum film on duct interiors - especially in homes within a mile of the BP Whiting complex. This film binds fibrous debris to metal surfaces, so a simple negative-pressure vacuum pass leaves the contamination in place.
- Disconnected or crushed duct runs - original 1920s-1950s galvanized work frequently separates at seams or collapses in basement plenums over decades of settling. Cleaning alone can’t restore airflow; the section has to be rejoined or replaced.
- Mold growth in basement supply plenums - Hammond’s lake-effect winters keep homes sealed for five or more months, and humidity combines with industrial dust in uninsulated plenums to create conditions where mold takes hold even when the living space feels dry.
Pricing for HVAC Cleaning in Hammond, IN
A complete HVAC cleaning in Hammond, Indiana runs $425 to $680 for a single system covering evaporator coil, blower, air handler, and heat exchanger. Homes near the Calumet industrial corridor often land at the upper end because oily residue demands extra agitation time and HEPA filter changes. A partial clean (evaporator coil and air handler only) runs $300 to $420. Duct sealing or replacement of crushed runs is quoted separately in writing. Here’s the breakdown:
- Evaporator coil cleaning: $180-$260
- Air handler cleaning: $220-$340
- Heat exchanger cleaning: $200-$300
- Condenser cleaning: $120-$180
- Full system (all components plus ducts): $425-$680
Every quote is written before work starts, under Haven Standard Clause 1. You’ll see the number, agree to the number, and pay the number. We also offer a Free Second Opinion: bring a competitor’s written estimate and we’ll put our price next to it in writing. Call (806) 606-6902.
We Also Serve Cities Near Hammond
Our HVAC Cleaning in Hammond crews regularly work in neighboring Gary, Westfield, Zionsville, and Noblesville. Each area has its own housing stock and air quality profile, but the written-price standard and documented photo record are the same everywhere. If you’re on the border of Hammond and one of these cities, call us and we’ll confirm coverage for your address.
Serving Hammond, IN - Our Local Coverage Area
We’re based in the Hammond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Hammond
That reddish-orange dust is iron oxide particulate, a signature of the BP Whiting Refinery and the legacy steel corridor that Hammond sits beside. Standard fiberglass filters can’t capture particles that small, so the dust re-enters the ducts within weeks of a cleaning unless the source removal is aggressive and the filter media is upgraded to match Hammond’s air quality. A proper clean with HEPA filtration and agitation removes what’s adhered to the duct walls, not just what’s loose. Call (806) 606-6902 for a written price specific to your home’s filter setup.
Yes. Homes built in Hammond during the 1920s through 1950s typically have original galvanized sheet-metal ductwork that was undersized even when new. Decades of heating cycles have caused seams to separate and sections to settle or crush. A cleaning that ignores these structural issues leaves you with clean ducts that still can’t move air properly. Our camera inspection identifies disconnected or collapsed runs before we clean, so we can quote sealing or replacement in the same written price.
Yes, especially in basement supply plenums. Hammond’s lake-effect winters keep homes sealed for five or more months, and while the living space feels dry, the uninsulated metal surfaces in a basement plenum stay cool enough to condense moisture from indoor humidity. When that moisture mixes with industrial dust from the refinery corridor, it creates conditions where mold grows slowly through the winter. A camera inspection of your plenum is the only way to know. We include that inspection as part of every cleaning.
The oily petroleum aerosol from the BP complex settles on blower wheels and motor windings, creating a sticky film that traps fibrous debris and throws the wheel out of balance over time. An unbalanced blower works harder, draws more current, and wears the bearings faster. Cleaning the blower wheel and air handler housing removes the film and restores balance, and it’s a standard part of our full HVAC cleaning in Hammond. Ask for the before-and-after photo of the blower wheel specifically.
No. A standard fiberglass filter catches large debris like hair and carpet fibers, but it does almost nothing for the sub-micron petroleum aerosols and iron oxide particles that characterize Hammond’s air near the Calumet industrial corridor. A MERV 11 or higher media filter, or an electronic air cleaner from Aprilaire or Honeywell, is a better match for local conditions. We can assess your current setup during the cleaning and recommend a realistic filter schedule for your block’s specific air quality. Call (806) 606-6902 to schedule.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, independently owned and operated under the Haven Standard since 2013.