Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Redford
HVAC cleaning in Redford, MI typically runs $295-$695 for a full system on a standard ranch home, and the defining factor is almost always the return duct design. Most Redford houses were built between 1948 and 1965, which means panned-joist returns: open wood bays with a sheet-metal face that collect decades of debris a normal brush can’t touch. We know these systems because we work on them every week. Call (806) 606-6902 and we’ll give you a written price before anything comes apart.
Why CleanRun Air Duct Cleaning Is Redford’s Preferred HVAC Cleaning Company
We’ve cleaned systems in Redford long enough to know what’s behind the filter grille before we open it. The brick ranches off Five Points, the Cape Cods along Beech Daly, the basement-forced-air layouts near Schoolcraft and Inkster: they all share the same 1950s DNA. That matters because a crew that’s only done new-construction flex duct will misread what they’re seeing here. Our technicians expect panned returns. They expect disconnected trunk joints. They expect a blower wheel caked with 30 years of dust from a system that never got its ducts cleaned.
Redford homeowners who call us get the same thing every time: a written scope with a fixed price, a background-checked uniformed technician, and a documented photo record of every duct run before and after. The 365-Day Done Right Promise is on paper, not a sales line. If the work isn’t right, we make it right. That’s the whole arrangement.
Our HVAC Cleaning Services in Redford

Every HVAC Cleaning job in Redford starts with a camera inspection. We photograph the inside of the supply trunk, each branch run, the return path, and the plenum before we quote a dollar figure. Then we clean. Here’s what that looks like on the components that matter most in this city’s older homes.
Evaporator Coil Cleaning
The evaporator coil sits above your furnace and does the actual cooling work in summer. In Redford’s humid months, a coil caked with dust and pet hair freezes up, drips into the pan, and breeds mold. We remove debris by hand, apply a professional coil cleaner, and document the before and after. A typical evaporator coil cleaning in Redford runs $180-$340 depending on access and buildup.

Blower Cleaning
Your blower motor pushes air through the whole house. On a 1950s ranch, the blower wheel often hasn’t been pulled since the furnace was installed. We remove the blower assembly, clean each vane, check the motor’s amp draw, and photograph the result. In Redford, where furnaces run seven months a year, a dirty blower wheel can reduce airflow by 30% or more. This service typically runs $150-$275.

Condenser Cleaning
The outdoor condenser coil collects grass clippings, cottonwood, and road dust all summer long. Redford yards with mature trees push a lot of debris through these fins. We wash the coil with a low-pressure rinse and a professional-grade cleaner, straighten bent fins, and verify the system’s pressure after cleaning. Expect $140-$220 for a standard residential condenser.

Air Handler Cleaning
Homes in Redford with a heat pump or high-efficiency system have an air handler instead of a furnace. The blower, coil, and filter housing all live in one cabinet, and every surface needs attention. We pull the cabinet panels, hand-clean the drain pan, treat the coil, and seal the cabinet before reassembly. Air handler cleaning in Redford typically runs $220-$420.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Redford
We work on whatever equipment is in your home, but in Redford we see a lot of Honeywell controls, Aprilaire media cabinets, and the occasional Guardsman static-pressure filter. Our crews carry replacement filters and common coil-cleaning chemicals from Abatement Technologies and Nikro, so we don’t have to leave your job half done over a consumable. If your Aprilaire filter housing is rusted or your Honeywell zone damper is stuck, we’ll tell you in writing what it costs to fix before we touch it.
Common HVAC Cleaning Problems We See in Redford Homes

- Panned-joist returns packed with debris. Roughly 8 of every 10 Redford ranch homes we open have open wood joist bays serving as return air channels. Mouse nests, insulation fragments, drywall dust, and the occasional child’s toy from 1962 all sit on the sheet-metal pan. These cannot be snaked. They get hand-extracted first.
- Disconnected or collapsed trunk joints. That long Michigan heating season means constant thermal expansion and contraction on gal plated steel ductwork. After 60 years, joints separate and basements fill with conditioned air that never reaches the registers. We find this on nearly every original system in Redford.
- Mold inside uninsulated ducts. Southeast Michigan’s summer humidity condenses on the outside of cold supply ducts in damp basements. That moisture supports mold growth inside the duct lining, which then blows into the living space every time the furnace fires. We document it, clean it, and recommend the sealing or dehumidification fix in writing.
- Filter grilles that haven’t been opened in decades. Homeowners near Schoolcraft and Five Points often show us a filter grille painted shut since the 1980s. When we finally open it, the panned return underneath hasn’t seen daylight since the original owner moved in. This is the single most common starting point for a CleanRun job in Redford.
Pricing for HVAC Cleaning in Redford, MI
Here are real numbers for Redford’s market. A full HVAC cleaning on a typical 1,200-1,500 sq ft ranch or Cape Cod: $295-$495 when the return is conventional ductwork. Add a panned-joist return that needs hand-extraction: $120-$250 more, because the joist bay has to be opened, cleaned by hand, and resealed. Blower cleaning: $150-$275. Evaporator coil cleaning: $180-$340. Condenser cleaning: $140-$220. A full-system package including ducts, blower, coil, and condenser on a 1950s Redford ranch typically lands between $550-$1,100 depending on condition and access.
What drives the price up is what we find: collapsed duct runs that need repair, joist bays full of rodent debris that need sanitizing, or a blower wheel so far gone it needs replacement. You’ll know the number before we start, in writing, every time. That’s Haven Standard Clause 1.
We Also Serve Cities Near Redford

CleanRun’s Redford crews work throughout the surrounding Detroit suburbs regularly. If you’re in Livonia, Westland, Southfield, or Dearborn, you deal with the same mid-century housing stock and the same ductwork problems, so our experience transfers directly. Scheduling is coordinated from our Detroit office, and we serve Redford homeowners every day.
Serving Redford, MI - Our Local Coverage Area
We’re based in the Redford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Redford

A panned-joist return is just a wood floor cavity with a piece of sheet metal screwed to the bottom. There’s no round metal duct to snake. Shoving a brush through it tears the sheet-metal face open and dumps everything into the joist cavity. Our technicians hand-extract the debris first, then run negative-pressure equipment through the opening after the cavity is safe to agitate. Call (806) 606-6902 if your home was built between 1948 and 1965 and has never had its returns inspected.
Redford’s summers are humid, and most of these homes have uninsulated galvanized ducts running through basements that stay cool. Condensation forms on the duct surface, and that moisture soaks into dust and debris already sitting inside. The result is mold growth you can’t see from the register. We photograph the inside of your duct runs and show you what’s there before recommending any treatment.
On a Redford home that old, we typically find a panned-joist return packed with decades of drywall dust, insulation fibers, and sometimes rodent nesting. The supply trunk will have separated joints. The blower wheel will be caked. The evaporator coil will be partially blocked. None of this means your system is ruined. It means the original ductwork has been there for 70 years and needs systematic hand-cleaning, not just a vacuum hose. We’ll photograph every run and show you the record when we’re done.
Redford’s furnaces run from October through April most years. That’s about 4,000 hours of runtime a season on a blower wheel that may not have been cleaned since the Nixon administration. A dirty blower wheel moves less air, runs hotter, and shortens the life of the motor. Cleaning it costs $150-$275 and usually takes under an hour once the cabinet is open. It’s the single highest-value component clean on any Redford system.
Often, yes. On 60-year-old trunk lines, the joints have loosened from decades of heating and cooling cycles. If we don’t seal the accessible gaps after cleaning, the dust we just removed gets pulled right back in from the basement. We include sealing recommendations in our written scope, and you’ll see the gaps on camera before we touch them. The 365-Day Done Right Promise covers this work, so if something wasn’t sealed properly, we come back.
Ready for a documented HVAC cleaning in Redford? Call (806) 606-6902 for a free estimate. One written price, before any work starts, with a full photo record when we leave. That’s how Tomas Reyes runs every job at CleanRun.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Redford, MI under the Haven Standard.




Before
After
Before
After