Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Revere
HVAC cleaning in Revere costs between $285 and $690 for a full system clean, depending on whether you have a single-family home or a triple-decker with multiple air handlers. Most Revere jobs take 3 to 5 hours on site. You’ll receive a written price before any work starts, and a documented photo record of every duct run when the crew leaves. Call (806) 606-6902 to schedule an estimate.
We know Revere’s housing stock because we work in it every week. The two- and three-family homes off Broadway, Shirley Avenue, and Winthrop Avenue have forced-air systems retrofitted into spaces that were never designed for ductwork. That means sharp bends, undersized chases, and improvised trunk runs that trap debris and resist standard cleaning equipment. Our crews work those tight basements and knee-wall crawl spaces daily.
Why CleanRun Air Duct Cleaning Is Revere’s Preferred HVAC Cleaning Company
CleanRun has served homeowners across HVAC Cleaning in Revere since our founding in 2013. Tomas Reyes, who leads our team, built the company on a simple rule: show the customer what’s inside their ducts before asking them to pay for cleaning. Every Revere job gets a camera inspection of the duct runs first, a written scope and price second, and the work third. Nothing happens until you’ve seen the evidence.
Our Revere customers keep our documented photo records. One homeowner on Beach Street near Revere Beach told us she’d had three previous cleanings and never saw a single photo of her ductwork. When we ran the camera, we showed her a 3-inch debris build-up at the first elbow off her supply trunk. That’s the difference between real work and vacuum noise.
We photograph the inside of every duct run, before and after. You get those photos as part of your job record. If the work isn’t right, the 365-Day Done Right Promise means we make it right, in writing, not subject to a manager’s mood.
Our HVAC Cleaning Services in Revere
We provide full HVAC Cleaning, not just duct brushing. For Revere homes, three services matter most: air handler cleaning, blower cleaning, and condenser cleaning. Here’s what each involves and why it matters in this city.
Evaporator Coil Cleaning
Your evaporator coil sits above the furnace or inside the air handler. In Revere, coastal humidity means these coils collect a grey, waxy biofilm that reduces heat exchange and drives up runtime. A dirty coil also becomes a reservoir for mold spores that get distributed every time the blower kicks on. We clean the coil with manufacturer-approved solutions from Nikro, rinse it under controlled pressure, and photograph the before and after.
Blower Cleaning
Beachfront homes along Ocean Avenue and the Point of Pines neighborhood take in salt-laden Atlantic air. That salt aerosol deposits on blower wheels and motor bearings. We see blower wheels with salt crust thick enough to throw the assembly out of balance, which strains the motor and shortens its life. We remove the blower assembly, clean the wheel vanes with a Rotobrush agitation tool, and verify the motor spins true under load before reassembly.
Condenser Cleaning
The outdoor condenser unit on Revere’s beachfront blocks gets caked with salt spray and windblown sand. A condenser coil coated in salt scale cannot reject heat efficiently, which pushes more particulate load onto the indoor coil and duct surfaces. We flush the coil with a low-pressure wash, clear the fins with a fin comb, and document the unit’s condition so you can see what was actually removed.
Air Handler Cleaning
In Revere’s triple-deckers, air handlers are often shoehorned into a basement corner or a third-floor closet. Limited clearance makes access difficult, and many air handlers here show rust scale inside the cabinet from years of humid, salt-laced intake air. We clean the cabinet interior, the blower housing, the coil, and the drain pan, then sanitize the surfaces and document everything. If the cabinet is rusted through in critical areas, we’ll tell you before doing anything, with a written price for repair or replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Revere
Revere homeowners run equipment from every major manufacturer. We service and clean systems built around Honeywell controls, Guardsman air handlers, and most forced-air configurations found in the city’s older housing stock. Our crews carry Rotobrush and Nikro cleaning equipment on every Revere job, along with sealants and mastic for the duct repairs these older homes routinely need. We don’t stock parts we can’t verify, and we won’t sell you a replacement you don’t need.
Common HVAC Cleaning Problems We See in Revere Homes
Revere’s geography and housing stock create a specific set of problems. We see these regularly, and they’re rarely mentioned on generic duct cleaning pages.
- Salt corrosion inside beachfront ductwork: Homes along Ocean Avenue and Revere Beach Boulevard pull salt aerosol into their HVAC intakes year-round. This deposits rust scale inside metal ducts and on blower assemblies within 10 to 15 years, a failure mode that takes decades to appear just a few miles west in Everett or Malden.
- Disconnected or crushed duct runs in retrofitted triple-deckers: Revere’s triple-deckers were built in the 1920s through 1950s, before forced-air HVAC existed as a standard. Retrofitted ductwork often runs through spaces never designed for it, and we regularly find separated branch runs or crushed flex sections that dump conditioned air into wall cavities, leaving rooms with weak airflow and dust buildup.
- Salt-caked blower wheels and failing motor bearings: The same marine air that rusts ducts seizes blower bearings and flakes rust into the supply and return airstreams. This forces premature motor replacement and contaminates clean air even after a standard duct cleaning.
- Beachfront condenser coils coated in salt spray: Condensers on the ocean-facing side of Revere get hit with salt spray and windblown sand, which reduces heat exchange and forces the whole system to work harder. The extra runtime pushes more debris onto the indoor coil and duct surfaces.
Our field experience in Revere
On a two-family triple-decker off Shirley Avenue, our tech ran a camera inspection and found a disconnected supply run feeding the second-floor bedrooms, a crushed flex section behind the knee wall, and salt-scale caked on the blower wheel from years of ocean air intake. We reconnected the run under negative pressure with a Rotobrush agitation tool, HEPA-filtered the entire trunk and branch network, and sealed the leaks with mastic. Afterward, the upstairs finally held a steady 68 degrees without the blower straining.
That’s what we mean when we say a Revere HVAC cleaning is often a repair job in disguise. The cleaning is necessary, but the real fix is reconnecting what’s come apart and sealing what’s leaking. We document all of it, and we put the price in writing before any work starts.
Pricing for HVAC Cleaning in Revere, MA
A typical single-family HVAC cleaning in Revere runs $285 to $470, covering the supply and return ducts, the air handler cabinet, the blower assembly, and the evaporator coil. For two- and three-family triple-deckers with multiple air handlers, expect $480 to $690, depending on the number of systems and accessibility. Condenser coil cleaning as a standalone service runs $90 to $160 per unit.
What moves the price? The number of air handlers, whether the ducts have been cleaned in the last five years, and whether we find disconnected runs that need reconnection and sealing. Every job includes a written scope and price before any work begins, a documented photo record of every duct run, and the 365-Day Done Right Promise in writing. You’ll never get a call with a surprise price. Estimates are free, and we’ll put our number next to any competitor’s written quote at no cost.
We Also Serve Cities Near Revere
Our crews serve the surrounding communities of Revere, Chelsea, Everett, Malden, and Saugus. Coastal homes in these areas face similar salt exposure, and we apply the same documented, evidence-first approach on every job. If you’re in one of these cities and want a written quote before any work begins, call us at (806) 606-6902.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Revere
Because Revere sits directly on the Atlantic. Salt-laden ocean air is drawn into HVAC intakes year-round, depositing corrosive salt particulates inside ductwork and on blower assemblies far faster than in inland suburbs. Homes within half a mile of Revere Beach and the Point of Pines neighborhood show visible salt crust and premature rust scale in ductwork within 10 to 15 years. Inland homes in Malden or Medford simply don’t experience this same deposition rate. We recommend annual inspection of the blower assembly and coils for any Revere home east of Broadway, and cleaning on a 4 to 5 year cycle for beachfront properties. Call (806) 606-6902 and we’ll put the assessment in writing.
You should expect a camera inspection first, not a vacuum hose. We run a camera through your supply and return runs before any cleaning begins, and we show you what’s there. In Revere triple-deckers, that often means disconnected branch runs, crushed flex sections behind knee walls, and years of accumulated dust and debris where retrofitted ducts make sharp turns. We’ll give you a written scope describing what we found, a flat price for the full job, and a documented photo record when we’re done. No per-vent pricing, no upsells, and no work you haven’t approved in writing.
Most salt damage can be repaired, not replaced. Rust scale inside metal ducts can be removed with agitation tools and HEPA extraction, and leaking or disconnected sections can often be reconnected and sealed with mastic. Replacement is only necessary when the metal has rusted through in structural areas, or when crushed flex sections cannot be salvaged. We’ll show you the camera footage and give you a written recommendation before any work proceeds. If you’d like a second opinion on a competitor’s quote, we’ll put our number next to theirs in writing, free of charge.
The difference is salt. In Revere, we routinely find salt scale caked on blower wheels and rust flakes inside the blower housing, which inland suburbs rarely see. This requires more than a brush and vacuum; we remove the blower assembly, clean the vanes individually with a Rotobrush agitation tool, and inspect the motor bearings for pitting and wear. If the bearings are failing, we’ll tell you and give you a written price for replacement before we put anything back together.
Yes. Register and filter cleaning only addresses the visible surfaces. The supply and return ducts are where the real accumulation happens, especially in Revere homes with retrofitted ductwork that has sharp bends and dead zones. We see this every week: clean registers and a spotless filter, but the camera shows a 3-inch debris build-up at the first elbow off the supply trunk. The documented photo record proves it. For an exact price on your home’s system, call (806) 606-6902 - estimates are free and always in writing.
Get a Written Quote for HVAC Cleaning in Revere
If you live in Revere, you don’t have to guess what’s inside your ducts. We’ll show you. Call (806) 606-6902 for a free estimate, a camera inspection, and a written price before any work begins. Tomas Reyes and our Revere crews do this work every day, and we back every job with the 365-Day Done Right Promise.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Revere since 2013.