Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Temple City
HVAC cleaning in Temple City typically costs $425 to $780 for a full system, and most jobs are completed in a single visit. If your home was built before 1975, you’re dealing with duct materials and connector failures that newer SGV homes simply don’t have. Our crews know Temple City’s original tract housing stock, the attic heat loads off the San Gabriels, and the specific ways these systems fail. Call (806) 606-6902 for a written price before we touch a single panel.
We don’t ask you to trust a coupon. We show you camera footage from inside your air handler, give you a written scope and flat price, then hand you a documented photo record of every duct run when the crew leaves. That’s the CleanRun way, and it’s the only way HVAC Cleaning should be sold in Temple City.
Why CleanRun Air Duct Cleaning Is Temple City’s Preferred HVAC Cleaning Company
Temple City homes carry a specific set of HVAC failures: brittle 1960s flex connectors, fiberglass duct board shedding into living spaces, and retrofitted AC units pulling attic air through unsealed transitions. We’ve documented these conditions in homes along Las Tunas Drive, throughout the Cloverly Avenue corridor, and in the ranch tracts east of Rosemead Boulevard. When a Temple City homeowner calls us, the technician on the line already knows what we’re likely to find before the van rolls. That local knowledge shapes the written quote, not a generic national price sheet.
Homeowners in Temple City consistently point to two things in their reviews: the written price arrives before work starts, and the before-and-after photos show the inside of ducts they’d never seen. Tomas Reyes has built CleanRun around a simple operating rule: no camera, no claim. Every job, including every evaporator coil we pull and every blower assembly we clean, gets photographed before and after. The photos are yours to keep. The 365-Day Done Right Promise is written on every invoice, not buried in a warranty PDF.
Dispatching from our Los Angeles office, crews serve Temple City locally and schedule on a straight calendar, not an urgency script. You’ll get an arrival window in writing. The technician who shows up is background-checked, uniformed, and identified by name before the work begins. That’s Haven Standard Clause 3: Verified Crews.
Our HVAC Cleaning Services in Temple City
Most Temple City homeowners call us thinking their ducts need vacuuming. What the camera usually shows is a system failure further upstream: a fouled evaporator coil, a blower wheel caked against a 140°F attic, or a collapsed flex connector trapping debris at an elbow. We clean the entire path, not just the runs.
Evaporator Coil Cleaning
Your evaporator coil sits directly in the air stream that reaches your lungs, and in Temple City’s particulate-heavy airshed, it loads with a paste of dust, pollen, and fine PM2.5 that settles hard against the fins. A dirty coil drops cooling capacity and raises run times, yet it’s the component most often skipped by $79 shop-vac specials. We remove the access panel, photograph the coil, clean it with professional-grade coil cleaners, and photograph it again before the panel goes back. Pricing for evaporator coil cleaning in Temple City runs $185 to $340, depending on access and severity.
Air Handler Cleaning
The air handler is the lung of your system, housing both the blower and often the coil. In Temple City’s pre-1970 ranch homes, we regularly pull air handlers that have never been opened since installation. Inside: decades of fine dust compacted around the blower motor, reduced airflow, and higher energy draw. We clean the cabinet, blower wheel, motor housing, and drain pan, then document it. Air handler cleaning in Temple City typically runs $150 to $275 when bundled with duct cleaning.
Condenser Cleaning
The outdoor condenser takes the brunt of Temple City’s environment: cottonwood from neighborhood trees, Santa Ana dust, and direct June-through-October sun. A clogged condenser coil forces the compressor to work against itself. We clean the coil fins with a low-pressure rinse and non-corrosive coil cleaner, clear the surrounding debris, and check the refrigerant lines for wear. Condenser cleaning as part of a full system service runs $95 to $160 in Temple City.
Coil Treatment
After cleaning, we apply an antimicrobial coil treatment that slows the regrowth of mold and mildew on the wet coil surface. In a climate where AC runs from May through November, the coil is wet for most of the year. Temple City homeowners with allergy-sensitive households or infants choose this treatment more often than coastal clients. Coil treatment is a flat $75 to $120 per coil and is always quoted in writing before application.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Temple City
The brand on your furnace cabinet matters less than the condition of what’s inside it, but we service and clean all major equipment found in Temple City homes: Carrier, Rheem, Lennox, Trane, Goodman, and York. For air quality and filtration upgrades, we install and service Aprilaire media filters and Honeywell electronic air cleaners. Our diagnostic tools include Abatement Technologies negative-air equipment for homes with severe fiberglass or particulate contamination. Because we run professional-grade equipment, not consumer shop vacs, the written price reflects what the job actually needs to be done right.
Common HVAC Cleaning Problems We See in Temple City Homes
- Brittle 1960s flex-duct connectors collapse at elbows. Decades of 140°F attic heat plus dry Santa Ana cycles degrade the plastic. The connector folds inward, creating a debris trap that standard vacuum-only cleaning cannot fully reach. The fix is cleaning plus connector replacement and sealing.
- Original fiberglass duct board sheds fibers into the air stream. Thermal cycling breaks down the board’s binding resin. Once the surface degrades, every cooling cycle releases fine glass fibers into your living spaces. We see this on homes along Baldwin Avenue and throughout the original tract developments.
- Retrofitted AC units on heating-only duct systems leak at transitions. When central AC was added in the 1970s and 80s, contractors connected cooling airflow to ducts sized only for heat. Every unsealed seam pulls hot attic air into the conditioned space. We seal these transitions after cleaning, which is often the real fix.
- Fine PM2.5 and wildfire smoke residue coat duct interiors far faster than coastal LA. Temple City sits at the base of the San Gabriels, where smog and particulate accumulate against the mountain range. Smoke events from the Angeles National Forest leave a persistent layer inside ductwork that returns every time the fan cycles through a warm afternoon.
Pricing for HVAC Cleaning in Temple City, CA
A full HVAC cleaning in Temple City runs $425 to $780 for a single system. That includes supply and return duct cleaning, air handler cleaning, blower cleaning, and evaporator coil cleaning with before-and-after camera documentation. Evaporator coil cleaning alone runs $185 to $340. Blower cleaning alone runs $95 to $175. Full-system jobs with severe fiberglass contamination, multiple disconnected runs, or attic work in tight ranch-house crawl conditions can reach $900 to $1,100, quoted in writing before we begin.
What affects the price: linear feet of duct, number of runs, accessibility of the attic or crawl space, severity of the build-up we document, and whether sealing or connector replacement is required. Haven Standard Clause 1 applies to every Temple City job: written price before any work starts, no exceptions. Call (806) 606-6902 for your written quote.
How Temple City’s 60-Year-Old Duct Systems Actually Fail
Temple City’s original tract neighborhoods, built mostly between the late 1940s and late 1960s, present a failure pattern we don’t see with the same regularity in Arcadia or Rosemead. The original ductwork was installed before central AC was standard. Attic spaces in these ranch homes regularly exceed 140°F from June through September. Fiberglass duct board, the common material of that era, degrades under repeated thermal cycling: the resin binder breaks down, fibers release into the air stream, and the board becomes structurally weak at joints. Then the retrofits came, cooling added in the 1970s and 80s onto ducts that were never sized for the airflow. The result is a network of seams, transitions, and elbows pulling hot attic air and insulation particles directly into living spaces.
On a 1958 ranch house near the Cloverly Avenue area, our technician found the original flex-duct connectors at two supply elbows crushed flat after decades of 140°F attic heat and Santa Ana cycles, trapping a thick layer of dust and debris. We used agitation tools and negative pressure to clean the supply and return ducts, then sealed the collapsed elbows and coated the evaporator coil with an antimicrobial treatment, restoring full airflow for the first time since the AC retrofit.
This is not a condition a standard duct cleaning can fix. If the connectors collapsed after the contractor leaves, the ducts will accumulate debris again within a season. The real fix includes sealing and connector replacement, which we quote as a line item separate from the cleaning itself. No surprises. Just a camera showing you what we found and a written price for what needs to happen next.
We Also Serve Cities Near Temple City
Our crews handle HVAC cleaning throughout the central and west San Gabriel Valley. We serve HVAC Cleaning in Temple City as well as El Monte, San Gabriel, Arcadia, and Rosemead. If you’re a few minutes outside city limits, the same written-price guarantee and documented photo record applies.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Temple City
Homes built before 1970 in Temple City were originally equipped with heating-only ducts made from fiberglass duct board and early flex connectors, then retrofitted with AC in the 1970s and 80s. That combination, plus 140°F attic heat and Santa Ana dust, accelerates debris build-up and connector failure. We recommend an inspection every two to three years for these homes, versus every three to five years for newer construction. Call (806) 606-6902 for a free written estimate.
Yes, professional negative-pressure extraction removes the smoke particulate that settles inside ductwork during Santa Ana-driven fire events from the Angeles National Forest. Smoke residue is fine and sticky, so it bonds to the dust already in your ducts and resists standard vacuuming. We document the before and after on camera so you can see the layer removed. Estimates are free at (806) 606-6902.
Yes, and we’d argue it’s the most important component to clean in a retrofitted system. The coil sits in the air stream, and in Temple City’s particulate-laden airshed it loads hard with fine dust that reduces cooling capacity and raises run times. A clean coil on an older retrofit can restore meaningful cooling performance. We photograph the coil before and after and quote the cleaning in writing. Call (806) 606-6902 for exact pricing.
The signs are uneven room temperatures, visible dust around registers, higher energy bills, and reduced airflow in rooms farthest from the air handler. The only way to confirm is a camera inspection. We include that inspection as part of every Temple City job, and you keep the photos. If we find crushed or disconnected runs, we’ll show you the footage and give you a written price for the repair. Call (806) 606-6902 to schedule.
Cleaning removes the loose fibers currently inside the ducts, but it will not stop an actively degrading duct board from shedding more. For Temple City homes with original 1950s duct board still in place, we recommend cleaning first, then assessing whether the board should be sealed or replaced. We’ll document what we find and give you a written scope. Free estimates at (806) 606-6902.
Get a Written Price for HVAC Cleaning in Temple City
You’re researching this because you want to know what’s inside your ducts and what it will cost to make it right. We’ll show you both. Call CleanRun at (806) 606-6902 and we’ll schedule a camera inspection of your Temple City system, followed by a written price for cleaning and any needed sealing. No per-vent pricing. No coupon math. Just a documented record of your home’s ductwork, before and after.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Temple City and the San Gabriel Valley.