Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Vancouver
HVAC cleaning in Vancouver, WA typically costs $380-$690 for a full system clean on a single-family home, with coil cleaning running $150-$300 and blower cleaning $120-$240 separately. What drives that range is what we actually find when the camera goes in. In Vancouver’s 1980s-1990s tract-home corridors, original flexible ductwork has spent 30 to 40 years sagging, kinking, and pulling loose at the boots, which means cleaning here is often repair-first work, not just brushing. Call (806) 606-6902 and we’ll put a written price in front of you before anything comes apart.
Why CleanRun Air Duct Cleaning Is Vancouver’s Preferred HVAC Cleaning Company
Vancouver homeowners call us because we show them what’s inside before we touch it. Every HVAC cleaning in Vancouver we perform starts with a camera inspection of the duct runs, the plenum, and the air handler, and we hand you the photo record when we leave. That practice has held since Tomas Reyes started this company in 2013, and it’s the whole reason the brand exists. The standard in this trade is to vacuum what you can reach and tell the customer it’s clean. We photograph every run before and after, because a duct run is either clean on camera or it isn’t.
We’ve now cleaned HVAC systems in over 52,000 homes, including a lot of Vancouver’s Orchards, Salmon Creek, and Mill Plain neighborhoods. The pattern we see in Clark County is predictable: builder-grade flex duct from the 80s and 90s that has sagged between joists, kinked at bends, or pulled off boot collars entirely. Our crews arrive expecting that, and they’re equipped for it. Background-checked, uniformed technicians operate under Haven Standard Clause 3: Verified Crews, and the license number is published on every estimate, not buried in a footer. If you’re comparing HVAC Cleaning in Vancouver companies, ask each one whether they photograph the inside of every duct run. We do. It’s been standard here since day one.
Our HVAC Cleaning Services in Vancouver
Evaporator Coil Cleaning
The evaporator coil sits above your furnace and does the actual cooling work. In Vancouver’s damp climate, condensation on that coil never fully dries between cycles, so dust and biological film accumulate faster than homeowners expect. A fouled coil forces the system to run longer to hit the setpoint, and on 1990s Mill Plain or Salmon Creek systems with original single-stage furnaces, that extra runtime compounds wear on an already-aging unit. We pull the coil, clean it with professional-grade coil cleaner, and treat it so moisture sheds instead of pooling. A typical evaporator coil cleaning in Vancouver runs $150-$300 depending on access and buildup.
Blower Cleaning
The blower wheel is the fan that moves air through your whole system. In Vancouver homes where ducts have leaked or registers were left open during a remodel, drywall dust and gypsum fines pack onto the blower blades and throw it off balance. We’ve pulled blower wheels in Hough neighborhood retrofits that were carrying a quarter inch of caked-on particulate. Cleaning restores airflow and cuts the strain on the motor. Blower cleaning in Vancouver typically runs $120-$240 as a standalone service, and it’s included in a full system clean.
Condenser Cleaning
The condenser is the outdoor unit, and in Vancouver it collects a specific blend: cottonwood fluff in late spring, pine needles from the evergreens that surround Clark County, and road dust kicked up by the east-wind events. When the coil on that outdoor unit gets matted, the system can’t reject heat, and head pressure climbs until the compressor shortens its life. We wash the condenser coil, straighten bent fins, and check refrigerant levels as part of the service. Condenser cleaning in Vancouver runs $120-$200 for most residential units.
Air Handler Cleaning
In Orchards and Salmon Creek homes with heat pumps or electric air handlers, the air handler cabinet is where coil, blower, and filtration all meet. That cabinet is also where moisture sits, where biological growth starts, and where debris from disintegrating flex duct liner settles. A full air handler cleaning means pulling the blower assembly, cleaning the coil, washing the cabinet interior, and sealing any gaps where unconditioned attic or crawlspace air gets pulled in. Air handler cleaning in Vancouver runs $250-$450, and it’s the service we recommend most often for the 1980s-1990s housing stock that dominates this market.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Vancouver
We service and clean equipment across the brands Vancouver homes actually have: Trane, Carrier, Lennox, Rheem, Goodman, York, and the builder-grade units that came with 1990s tract construction. Our cleaning and repair equipment runs on professional-grade gear from Rotobrush, Abatement Technologies, and Guardsman, because a shop-vac truck cannot produce the negative-pressure extraction a real HVAC cleaning in Vancouver requires. We name the equipment in the written scope, so you can verify independently what’s being used before you agree to the price. That’s Haven Standard Clause 1: written price before any work starts.
Common HVAC Cleaning Problems We See in Vancouver Homes
- Drywall dust packed into the return plenum. In new-build Vancouver homes, builders frequently leave registers open during drywall finishing, so gypsum fines get pulled into the return and coat the blower and heat exchanger on first fire-up. A handover clean rarely touches the plenum.
- Sagging, kinked, or detached flex duct. On 1980s-1990s Orchards and Salmon Creek tract homes, the original flexible duct runs have sagged between joists or pulled off the boot collars entirely. The duct is leaking conditioned air into the floor cavity while pulling crawlspace air into the system.
- Moisture-fed biological growth. Vancouver averages over 40 inches of rain annually, and that humidity finds every leak in a duct system. Where a boot connection is unsealed or a flex run has pooled condensation in a low pocket, biological growth becomes a routine finding, not an edge case.
- Retrofitted duct runs in old framing cavities. Hough and Arnada homes from the early 1900s-1940s often got forced-air systems added decades after construction, running ducts through spaces never designed for them. Those irregular runs collect debris at awkward elbows and are impossible to clean properly without a camera to see where the brush has actually been.
Why Vancouver’s New Homes Need This Sooner Than Owners Expect
Here’s what a generic HVAC Cleaning page won’t tell you about Vancouver: the builder handover on a new construction home almost never includes a duct clean, and the ducts are almost never sealed during construction. Registers sit open while drywall crews sand, so gypsum fines fill the return plenum. Sheetrock offcuts, sawdust, and even fast-food wrappers end up in duct runs before the first owner gets the keys. We’ve documented this on camera in brand-new homes across Vancouver’s east-side subdivisions. The first service call often happens within eighteen months, when the new owner notices the house never heats evenly or a fine white dust settles on every surface no matter how often they clean. The builder should have delivered the home with sealed ducts and a clean plenum. Most don’t. Our job is to document what’s actually there and fix it in writing.
In the Orchards and Salmon Creek corridors specifically, the bigger story is what time has done to the original ductwork. On a 1992 Salmon Creek two-story, our camera inspection found a supply run to the master bedroom had slipped off its boot collar and was blowing conditioned air into the floor cavity, while a kinked return in the garage ceiling was choking airflow to the air handler. We pulled the flex, reattached and sealed the boots, then ran source removal with our Rotobrush and HEPA-filtered negative pressure to clear the 30 years of construction dust, drywall debris, and moisture-fed biological growth that had collected in the sagging lines. That’s a typical Vancouver job. The cleaning and the repair are the same visit, because they’re the same problem.
Pricing for HVAC Cleaning in Vancouver, WA
Here’s what we write on estimates in Vancouver, in dollars, before any work starts:
- Full HVAC system clean (duct runs, plenum, blower, evaporator coil, air handler): $380-$690 for a single-family home, sized by square footage and number of runs.
- Evaporator coil cleaning (standalone): $150-$300.
- Blower cleaning (standalone): $120-$240.
- Condenser cleaning (outdoor unit): $120-$200.
- Air handler cleaning (heat pump or electric systems): $250-$450.
- Duct repair or sealing (reconnecting boots, replacing sagged flex, sealing leaks): quoted as a separate written line item after the camera inspection, typically $180-$520 depending on scope.
What moves the number is what the camera shows: access difficulty, the length and condition of the duct runs, and whether repair is needed before cleaning can even work. We don’t quote per vent, and we don’t price in the driveway. The written price is the price. That’s Haven Standard Clause 1, and it has been since 2013. If you have a competitor’s written estimate, bring it and we’ll give you a Free Second Opinion, our number next to theirs in writing.
We Also Serve Cities Near Vancouver
Our work in Vancouver regularly takes us across the Clark County line into Camas, and we serve the broader metro corridor through Tacoma, Auburn, and Federal Way with the same written-price standard and documented photo record on every job. If you’re just over the bridge or up the I-5 corridor, call and ask for the Vancouver team.
Serving Vancouver, WA - Our Local Coverage Area
We’re based in the Vancouver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Vancouver
Because builders routinely leave registers open during drywall finishing, letting gypsum dust and construction debris fill the return plenum and duct runs before the first owner moves in. The handover clean rarely touches the ductwork, so the system starts its life already loaded with particulate. Call (806) 606-6902 and we’ll camera the plenum and show you what’s in there in writing.
It’s both, and treating it as only one wastes your money. Sagging flex creates low pockets where damp Vancouver air condenses and biological growth colonizes, and a pulled boot means you’re paying to condition a floor cavity. The repair and the clean have to happen together or neither holds.
Vancouver gets over 40 inches of rain a year, and that humidity sits against every unsealed boot connection and low flex-run pocket in your duct system. Where air leaks, moist indoor air meets dust and organic material, and biological growth follows. In this climate, it’s a standard camera finding, not an outlier.
Yes, but not by guesswork. Homes from the early 1900s-1940s in Hough and Arnada often had forced-air systems run through framing spaces that were never designed as ductwork, and those irregular runs collect debris at sharp elbows where a blind brush won’t reach. We camera every run first, clean what the footage shows, and document the result. If a run is too degraded to clean, we tell you that before quoting the clean.
Ask whether they photograph the inside of every duct run before and after, whether their price is written before work starts, and whether they’re prepared to repair the ductwork if the camera finds it sagging or disconnected. If the answer to any of those is vague, you already have your answer about the other two.
Call CleanRun Air Duct Cleaning in Vancouver
Every HVAC cleaning we do in Vancouver starts with a written price and ends with a documented photo record of every duct run, handed to you as a standard deliverable. That’s how Tomas Reyes has operated CleanRun since 2013, and it’s what the 365-Day Done Right Promise means in practice: if it’s not done right, we make it right, in writing. Call (806) 606-6902 for a free estimate on your Vancouver home, and ask for the camera inspection. You’ll see what we see before you pay a dollar.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning.