Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable HVAC Cleaning Across Wichita
HVAC cleaning in Wichita is not a once-a-decade luxury. It’s a recurring necessity driven by the city’s position at the center of the winter-wheat belt and its rank among the windiest major metros in the country. A full HVAC cleaning here, covering the evaporator coil, blower assembly, and air handler, typically runs $380 to $680 for a modest single-system home, depending on what our camera inspection finds inside the runs. CleanRun Air Duct Cleaning has served 52,000+ homes since 2013, every one documented with before-and-after photos and a written price agreed before a single panel comes off. Call (806) 606-6902 and we’ll give you a fixed written number, not a teaser.
Why CleanRun Air Duct Cleaning Is Wichita’s Preferred HVAC Cleaning Company
Wichita homeowners don’t need a lecture about dirty ducts. They need to see what’s actually inside theirs. That’s the entire premise of how we work, and it’s why homebuyers in College Hill, Northeast Riverside, and Crown Heights call us after an inspection flags the HVAC. Every visit includes a camera pass through the supply and return runs, documented in the job record the customer keeps. If the camera shows a 3-inch debris build-up at the first elbow, the photo goes in your file, not just our notes.
Our technicians work under the H.A.V.E.N. Standard, which puts the burden on us to prove the work. Haven Standard Clause 1: a written price before any work starts. Haven Standard Clause 3: background-checked, uniformed crews identified by name before they step inside. No exceptions, no manager approval required. The 365-Day Done Right Promise means if a section of the system we cleaned re-contaminates within a year due to a missed defect, we return and make it right at our cost. That’s not a marketing line. It’s the written guarantee included on every invoice.
We also offer a Free Second Opinion on any written estimate. Bring us a competitor’s number, and we’ll put our own number next to it in writing. If the competitor priced a coil cleaning at $800 without opening the cabinet, and our camera shows a coil only marginally fouled, we’ll tell you that and write the lower figure.
Our HVAC Cleaning Services in Wichita

Here’s where we get specific. HVAC cleaning is a broad term. In Wichita, it usually means one of these four systems, and each has its own failure pattern tied to local climate and housing age. We service all makes and models, and we carry parts locally for the major brands seen across Wichita’s mid-century and newer homes.
Evaporator Coil Cleaning
Evaporator coils in Wichita homes take a beating from wheat chaff, fine topsoil, and whatever the prevailing wind pushes through the building envelope. A fouled coil reduces heat transfer, which means the compressor runs longer, electricity bills climb, and on a 100-degree July day the system can’t hold setpoint. We pull the access panel, photograph the coil before and after, and use a combination of negative-pressure extraction and manufacturer-specified coil cleaners. A typical evaporator coil cleaning in Wichita runs $180 to $320 as part of a full HVAC cleaning, depending on coil condition and accessibility.

Blower Cleaning
The blower wheel and motor in a Wichita system with a connected duct leak will accumulate the same fine tan sediment you see on window sills. That build-up unbalances the wheel, reduces airflow, and in severe cases burns out the motor windings. We remove the blower assembly, clean the fins and housing, inspect the motor bearings, and reinstall with a static pressure check. In older homes near Harry and Rock Road where the return chase pulls air from the garage or crawlspace, we often find the blower wheel caked enough to cut airflow by 30 percent or more. Blower cleaning typically adds $120 to $180 to a full-system cleaning.

Condenser Cleaning
The outdoor condenser coil faces the same wind-driven particulate load. A condenser clogged with cottonwood fluff from the Arkansas River corridor or wheat chaff from the west side will run high head pressures and short-cycle. We clean condenser coils with a proper coil comb, rinse, and fin straightening where needed, not a garden hose at full blast. Condenser cleaning in the Wichita market typically runs $140 to $220 as a standalone service, or $80 to $120 when bundled with the indoor work.

Air Handler Cleaning
Air handlers in Wichita’s 1950s and 1960s ranches, particularly the east and northeast sides, often sit in tight closets or unconditioned basements with original insulation that’s been shedding for decades. We clean the cabinet interior, drain pan, and condensate line, and we replace degraded insulation if the camera shows it breaking down. This is the component most likely to harbor the musty odor that returns a month after a cheap vent-only cleaning. Air handler cleaning with drain line service runs $150 to $250 in Wichita.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Wichita
We work on all major residential systems installed across Wichita from Lennox, Carrier, Trane, Rheem, and Goodman to older units from the aerospace-era housing boom. Our equipment roster includes Rotobrush for negative-pressure extraction, Nikro for HEPA filtration and agitation tools, and Honeywell media filters and Aprilaire accessories when a system needs a filtration upgrade. That matters because it means we’re not improvising with a shop vac and a drill brush. The equipment names are printed on the job scope we hand you before any work starts, so you can verify exactly what’s being used.
Common HVAC Cleaning Problems We See in Wichita Homes

After 52,000+ homes served, certain patterns repeat house to house. Here’s what we actually find when the camera goes in:
- Wheat chaff packed against the first supply bend. On Wichita’s west and northwest sides, homes face directly into prevailing southerly winds across open farmland. By early June, we routinely pull supply registers to find a visible layer of tan chaff, sometimes an inch thick, packed against the first elbow. Homeowners often mistake it for mold until we show them the photo and explain the difference.
- Failed cloth-tape and mastic joints on original galvanized ductwork. The 1950s and 1960s aerospace boom housing across east and northeast Wichita left thousands of homes with galvanized sheet-metal runs sealed with tape that has long since dried and failed. Those gaps pull attic or crawlspace air, fiberglass liner fibers, and grain dust into the airstream continuously. Cleaning alone can’t fix this. The joints need resealing, or re-contamination happens within months.
- Crushed or disconnected runs under slab floors. In mid-century ranch homes with slab construction, a settling foundation or a previous renovation can crush duct runs buried under concrete. We’ve seen returns pulling directly from the soil beneath the slab. A camera inspection is the only way to know. Airflow numbers tell part of the story; the video tells the rest.
- Degraded fiberglass duct liner shedding into the airstream. Many original Wichita systems used fiberglass liner inside the duct runs. After 60-plus years of Kansas temperature swings and humidity cycles, that liner breaks down and sends fibers through the registers. We find this on nearly every older system we inspect in College Hill and Crown Heights. The fix is liner removal or encapsulation, not a standard cleaning.
Pricing for HVAC Cleaning in Wichita, KS
Let’s put real numbers on the table. A full HVAC cleaning in Wichita, meaning the evaporator coil, blower assembly, air handler interior, and supply and return runs, runs $380 to $680 for a single-system home under 2,000 square feet. Larger homes with multiple returns, basement systems, or accessible crawlspace runs fall in the $550 to $900 range. If the camera finds crushed runs, separated joints, or liner that needs encapsulation, sealing work adds $40 to $80 per affected joint or run section, depending on materials and access. We’re quoting real numbers because Haven Standard Clause 1 means you get them in writing before we start. Call (806) 606-6902 and we’ll schedule an inspection. The estimate is free, and it won’t change when the van shows up.
We Also Serve Cities Near Wichita

Our Wichita crews also cover homeowners in Derby and the surrounding towns. If you’re just south of the city and dealing with the same wind-driven wheat dust loading, the same pricing structure applies. One written price, one documented photo record, one 365-Day Done Right Promise. Same HVAC Cleaning standard, same team, same guarantee in writing.
Serving Wichita, KS - Our Local Coverage Area
We’re based in the Wichita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Wichita

That tan dust is wheat chaff from the surrounding winter-wheat belt. Wichita sits at the center of Kansas wheat country, and sustained winds averaging 12 to 13 mph carry fine agricultural particulate across the metro for months, with the heaviest loading during the May and June harvest. If your home faces west or northwest, the supply ducts act like a wind tunnel intake, and the chaff packs against the first bend behind the register. No amount of cleaning will permanently stop it. Sealing the building envelope and every duct joint is the only real fix. Call (806) 606-6902 for an inspection and a written sealing estimate.
Usually not. In our experience, the tan fuzz around west Wichita registers is wheat chaff mixed with fine topsoil. The black streaks are often dust staining from air movement against the register face, not fungal growth. We’ll inspect it and tell you straight. If it is mold, we’ll photograph it and recommend the correct remediation path rather than selling you a chemical treatment you don’t need. The camera doesn’t guess, and neither do we.
A crushed return under the slab means the blower is starving for air, which drops airflow across the evaporator coil, freezes it in summer, and shortens compressor life. A disconnected supply run means you’re paying to heat and cool a crawlspace or the soil under your foundation. In a 1960s ranch, we’ve measured airflow below 210 CFM at a supply register that should deliver 90 to 100 CFM or better. The fix is a camera inspection first, then targeted sealing and reconnection, not just a cleaning. Call (806) 606-6902 for a measured assessment.
Yes, measurably. A fouled evaporator coil reduces heat transfer, which means the compressor runs longer to hit the same setpoint. On a 100-degree Wichita afternoon, that’s the difference between holding 74 degrees and falling behind by 4 p.m. We clean coils with manufacturer-specified cleaners and negative-pressure extraction, and we document the before and after with photos. The improvement shows up in lower run times and a cooler supply air temperature. A coil cleaning in Wichita runs $180 to $320 as part of a full system clean.
Yes. A MERV filter protects the coil and downstream runs, but it does nothing for the blower wheel and motor housing on the upstream side. If the return chase is pulling air from a leaky crawlspace or the duct joints are failed, the blower wheel still loads with fine dust, unbalances, and cuts airflow. We’ve pulled blower wheels in Wichita homes that looked like they’d been dipped in tan felt, even with fresh filters installed. Blower cleaning is a $120 to $180 add-on during a full HVAC cleaning, and it’s worth doing any time the cabinet is open.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Wichita since the company’s founding in 2013.




Before
After
Before
After