Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Air Duct Cleaning in New York City, NY
Dryer vent cleaning in New York City has to account for building stock that simply does not exist in most of the country. Many pre-war apartments and brownstones have no forced-air ductwork at all, while post-war high-rises and newer luxury towers run ducts through shared mechanical rooms, freight elevators, and strict building-management protocols. Add the city’s humid summers and year-round particulate load from vehicle exhaust, subway brake dust, and constant construction, and vents load up faster than anyone expects. If you need a written price before any work starts, call (806) 606-6902.
Why New York City Homes Are Different
New York City’s housing stock splits into two very different worlds when it comes to ductwork. Pre-war tenements, brownstones, and classic apartment buildings across the five boroughs were built around steam or hot-water radiators, so a huge share of the city’s residential units have no ducts to clean at all. Where ductwork does exist, it is concentrated in post-war high-rises from the 1950s through the 1980s, many of which use fan coil unit systems rather than central forced air, and in newer luxury residential towers where ducts were built into high-density structures from the start. That means our crews in New York City routinely work in shared mechanical rooms serving dozens of units, coordinate with building management and freight elevator schedules, and follow NYC DOB compliance requirements that a suburban house call would never involve.
The climate works against these systems. Humid summers, made worse by the urban heat island effect and proximity to the Hudson and East River, push moisture into sealed, densely occupied floors. That moisture accelerates mold and microbial growth inside ductwork. Meanwhile, the city’s constant particulate environment means ducts here load up with contaminants far faster than comparable systems in less dense metros. Commercial towers in Midtown and Downtown Manhattan often still carry original 1960s to 1980s ductwork where surrounding insulation may contain asbestos, which triggers NYC DEP asbestos regulations before any cleaning can begin. None of this is generic; it changes the scope, the access, and the paperwork on a New York City job.
Our Main New York City Services
Two services account for most of the calls we take from New York City homeowners and property managers. Each has its own dedicated New York City page with full pricing and local detail.
Air Duct Cleaning in New York City
Full-system air duct cleaning in New York City means reaching duct runs that often sit behind decades of retrofits, inside shared mechanical rooms, or behind access panels in tight high-rise utility closets. We photograph the inside of every run before and after, using negative-pressure extraction to pull debris out rather than pushing it around. The written price covers the whole system before a single panel comes off. For complete local pricing and the specific challenges of cleaning ducts in New York City buildings, see Air Duct Cleaning in New York City.

HVAC Cleaning in New York City
HVAC cleaning in New York City goes beyond the ducts themselves. Coils, blower assemblies, and drain pans inside fan coil units and air handlers collect the same particulate load the city puts into the air, and humid summers turn that into a biological problem fast. This work is common in post-war buildings where fan coil systems predominate. We clean the full air path and document it with before-and-after photos. For the complete breakdown, visit HVAC Cleaning in New York City.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterDryer Vent Cleaning in New York City

Dryer vent cleaning in New York City often means dealing with vents that run vertically through multiple floors inside building chases, not horizontally through an exterior wall. Lint builds up inside those long risers, and in a city where the FDNY enforces exhaust-system intervals aggressively in commercial spaces, residential building management often applies the same scrutiny to dryer exhausts serving stacked units. A restricted vent drives up drying time, wastes energy, and creates a documented fire hazard. Our crews inspect, clean, and photograph every run; you get a written price first and a photo record when the job is done. Call (806) 606-6902. For the full scope of what this service covers, see Dryer Vent Cleaning.
Dryer Vent Inspection
Signs you need it
Clothes take multiple cycles to dry, the dryer feels hot on the outside, or the flap outside does not open when the machine runs.
What it costs in New York City
A camera inspection of the vent run typically costs $95-$160 as a standalone visit, often waived when combined with a cleaning.
How we do it
We run a camera through the entire vent path from the dryer connection to the exterior or roof termination, photographing restrictions and documenting the build-up before quoting a written price for the cleaning.
Vent Cleaning
Signs you need it
You see lint around the dryer opening, the room feels humid when the dryer runs, or it has been more than a year since the last cleaning.
What it costs in New York City
Standard dryer vent cleaning in New York City runs $130-$190 for a single-unit vent, with multi-unit or long-riser vents priced higher after the written inspection.
How we do it
We run a rotating brush and HEPA-filtered negative-air extraction through the full vent run, collecting lint at the termination point rather than blowing it into the room or the building chase.
Lint Removal
Signs you need it
Visible lint is packed around the exterior vent hood or the dryer’s internal lint trap no longer catches what it used to.
What it costs in New York City
Lint removal as a focused service typically costs $110-$160, usually folded into a full vent cleaning when the obstruction is significant.
How we do it
We remove the vent hood or access panel, pull out accumulated lint by hand where it has compacted, then run the brush and vacuum to clear the remaining debris.
What Dryer Vent Cleaning Costs in New York City
| Item | Typical range in New York City |
|---|---|
| Dryer vent inspection | $95 - $160 |
| Standard dryer vent cleaning | $130 - $190 |
| Lint removal (focused) | $110 - $160 |
Long vertical risers inside multi-story buildings, roof terminations requiring parapet access, or vents that have never been cleaned push the price toward the upper end. You get a written price after the camera inspection, before any work starts.
How often should a dryer vent be cleaned in New York City?
Every 12 to 18 months for a single-family home, and every 12 months in buildings where multiple units share a vertical riser. Lint builds faster in this city’s particulate-heavy air and restricted vent paths. Call (806) 606-6902 and we will give you a written price before scheduling.
Can you clean a dryer vent that runs through multiple floors in a New York City building?
Yes, if building management grants roof or chase access. Most of these jobs require coordination with a super or property manager and possibly a freight elevator reservation for equipment. We have handled this before and will spell out the access requirements in writing before anything is scheduled.
Duct Repair & Sealing in New York City

Duct repair and sealing in New York City usually means finding leaks inside chases and mechanical rooms that no one has opened in decades. Post-war high-rises built with fan coil systems often have metal duct joints that have separated, flex duct that has collapsed, or insulation that has degraded in humid mechanical rooms. Leaky ducts pull in whatever is in the surrounding space, including dust from construction and the same particulate load the city pushes out its windows. See Duct Repair & Sealing for the full scope of this work.
Duct Sealing
Signs you need it
Rooms never reach the temperature on the thermostat, dust accumulates unusually fast, or the system runs constantly without satisfying the call for heat or cooling.
What it costs in New York City
Whole-system duct sealing typically ranges from $450 to $900 in New York City, depending on the number of runs and access difficulty.
How we do it
We locate leaks with a pressure test or visual inspection, then seal every accessible joint and seam with mastic or UL-listed tape, photographing each repair as it is completed.
Flex Duct Repair
Signs you need it
A flex duct has visibly collapsed, is kinked behind a wall or ceiling, or has torn where it connects to a plenum or register boot.
What it costs in New York City
Replacing or repairing a damaged flex duct section in New York City runs $180-$350 per section, with the final price set after the written inspection.
How we do it
We remove the damaged section, install a correctly sized replacement with proper support spacing, and seal both connections before photographing the finished repair.
Mastic Sealant
Signs you need it
You can feel air moving around duct joints in a mechanical room or closet, or a previous tape seal has dried and peeled away.
What it costs in New York City
Mastic sealing as part of a larger repair job is priced per access point at roughly $80-$140, always included in the written scope before work begins.
How we do it
We brush water-based mastic over every accessible seam and joint in the identified section, creating a permanent air barrier that does not dry out and peel the way duct tape does.
What Duct Repair & Sealing Costs in New York City
| Item | Typical range in New York City |
|---|---|
| Whole-system duct sealing | $450 - $900 |
| Flex duct section repair | $180 - $350 per section |
| Mastic sealing (per access point) | $80 - $140 |
Access is the biggest cost variable in New York City. If we need to open a wall, coordinate with building management, or work inside a shared mechanical room during restricted hours, the price reflects that before any work starts.
Do I need building management approval for duct repairs in a New York City co-op or condo?
Often yes. Any work inside a shared mechanical room or behind a building chase typically needs written approval from the board or managing agent, and possibly a permit if structural access is required. We can document the scope for that approval. Call (806) 606-6902 to start.
How do I know the duct leaks were actually sealed?
You receive a photo record of every seam and joint we seal, taken before and after the mastic or tape goes on. That record is part of the standard job file, not an add-on. If a leak reopens within 365 days, the Done Right Promise applies.
Air Quality & Sanitizing in New York City

Air quality and sanitizing work in New York City has to contend with humidity that does not stop. The urban heat island effect and the rivers on both sides of Manhattan push moisture into sealed mechanical rooms and duct interiors, which is exactly where mold and bacteria take hold. Add the particulate load from subway brake dust, vehicle exhaust, and constant construction, and the air inside a building often carries more than what the filters were designed to catch. See Air Quality & Sanitizing for the full service breakdown.
Mold Treatment
Signs you need it
You smell a persistent musty odor from the registers, see visible mold growth around vents or inside the air handler, or have had moisture intrusion in a mechanical room.
What it costs in New York City
Duct surface mold treatment in New York City ranges from $350 to $700, depending on the number of runs and whether the air handler itself needs treatment.
How we do it
We apply an EPA-registered antimicrobial to accessible duct surfaces after physically removing visible growth, then photograph the treated areas and document the product used.
Odor Removal
Signs you need it
Cooking, smoke, or chemical odors linger long after the source is gone, or a previous tenant’s habits left the apartment smelling wrong.
What it costs in New York City
Whole-system odor treatment typically runs $300-$600 in New York City, with the written quote set by the number of runs and the source of the odor.
How we do it
We clean the duct surfaces first, then deploy a professional-grade vapor or thermal fog treatment through the system to reach surfaces that cannot be physically scrubbed.
UV Light Installation
Signs you need it
You have had repeated mold or bacterial growth on the coil or inside the air handler, or your household includes people with respiratory conditions that react to indoor air.
What it costs in New York City
Installing a UV light system at the coil typically costs $750-$1,400 in New York City, including the unit, installation, and wiring.
How we do it
We mount the UV lamp inside the air handler or at the coil, wire it into the system so it runs with the fan, and photograph the finished installation.
What Air Quality & Sanitizing Costs in New York City
| Item | Typical range in New York City |
|---|---|
| Duct surface mold treatment | $350 - $700 |
| Whole-system odor removal | $300 - $600 |
| UV light installation | $750 - $1,400 |
Prices move in New York City when access is tight, when the air handler sits in a shared mechanical room, or when the treatment area includes multiple duct runs serving different units. Every number is in writing before work begins.
Will sanitizing my ducts actually help with New York City’s outdoor air pollution?
Sanitizing targets what grows and accumulates inside the system, not what is outside. It reduces mold, bacteria, and odors in the air that circulates through your unit. Air filtration and regular duct cleaning address outdoor particulate. Call (806) 606-6902 for a written scope.
How long does a UV light last before it needs replacing?
Most UV lamps need replacement every 12 months to maintain effectiveness at the coil. We note the replacement date in the written job record so you know when the next lamp is due. That date is part of the documentation, not a guess.
Brands We Service in New York City

We work on all major duct and air quality brands, including Abatement Technologies, Rotobrush, and Nikro equipment, with commonly needed replacement parts stocked locally. See our brands for the full list.
Pricing for Air Duct Cleaning in New York City, NY
| Service | Typical range in New York City |
|---|---|
| Dryer vent inspection | $95 - $160 |
| Standard dryer vent cleaning | $130 - $190 |
| Lint removal (focused) | $110 - $160 |
| Whole-system duct sealing | $450 - $900 |
| Flex duct section repair | $180 - $350 per section |
| Mastic sealing (per access point) | $80 - $140 |
| Duct surface mold treatment | $350 - $700 |
| Whole-system odor removal | $300 - $600 |
| UV light installation | $750 - $1,400 |
Building access, shared mechanical rooms, freight elevator reservations, and roof terminations all push prices up in New York City, and we put every one of those variables in the written price before any work starts. No per-vent pricing, no bait-and-switch, no surprises after the van is parked.
Neighborhoods We Serve in New York City

Our New York City crews cover all five boroughs, from dense Midtown high-rises to brownstone blocks and newer residential towers along the waterfront. Typical response time for the New York City area is 1 to 2 business days for non-emergency scheduling.
- Upper East Side
- Williamsburg
- Astoria
- Park Slope
- Riverdale
Service Area - Cities Near New York City
In addition to New York City itself, we serve the surrounding boroughs and nearby areas including Brooklyn, NY, Queens, NY, Manhattan, NY, and The Bronx, NY. Each has its own local page with pricing and scheduling details.
Serving New York City, NY - Our Local Coverage Area

We’re based in the New York City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in New York City
Often yes. If the ductwork sits inside a shared mechanical room, a building chase, or behind walls the co-op or condo association controls, written approval from the managing agent or board is typically required before any work begins. We can provide a written scope of work for that approval.
Most jobs are scheduled within 1 to 2 business days once access is confirmed. If building management or a freight elevator reservation is needed, the schedule depends on that approval. Call (806) 606-6902 and we will give you a written price and proposed date.
For most residential jobs, no permit is required for basic duct cleaning. Commercial work, anything involving asbestos-containing insulation, or structural access inside a chase may trigger NYC DEP or DOB requirements. We identify those before any work starts and document it in writing.
For a written price on any service in New York City, call (806) 606-6902. Tomas Reyes and the CleanRun team answer every call with a real person, and every job starts with a written price before a single panel comes off.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What New York City Customers Say
"They found a disconnected duct in the crawl space that had been dumping conditioned air under the house for years. Photographed it, quoted the repair, fixed it."
- Devon A."On time, professional, and explained what the readings meant without talking down to me."
- Warren E."The before and after photographs of each run are the reason I used them. You cannot argue with what came out of the return."
- Marguerite O.




Before
After
Before
After