Air Duct Cleaning in Richardson - One Flat Price, Before-and-After Photos

Air Duct Cleaning in Richardson, TX

Dryer vent cleaning in Richardson runs $89-$189 for a standard single-story ranch, and most jobs take under an hour. What separates Richardson from every neighboring city is what technicians find once the vent cover comes off: 40 to 55 years of lint packed behind original 1960s-1980s vents in slab-on-grade homes where every duct and vent run bakes in attic heat that passes 140°F every July. The work here isn’t just clearing a clog. It’s documenting what a half-century of Texas heat has done to the entire run. Call (806) 606-6902 and you’ll get a written price before a single panel comes off.

Why Richardson Homes Are Different

Richardson’s residential core went up fast during the Telecom Corridor boom, and the housing stock tells that story. Canyon Creek, Breckinridge, and the neighborhoods around Heights Park are filled with 1960s-1980s ranch-style slab-on-grade homes. No basements, no conditioned crawlspaces. Every supply and return duct runs through an unconditioned attic that hits 140-150°F through the Texas summer, then cycles down into the 30s during winter cold snaps. That thermal swing, repeated twice a year for four or five decades, cracks mastic seals and breaks down the adhesive holding fiberglass duct board together. Technicians working Richardson attics regularly pull back an access panel and find original duct board with a liner so brittle it’s actively shedding fiberglass particulate into the air stream. The mountain cedar event from December through February adds another layer: juniper pollen from the Hill Country rides north winds into the DFW basin, and Richardson HVAC systems pull that bioaerosol load into ductwork that’s already degrading. A routine cleaning in Richardson usually turns into cleaning plus sealing plus repair. That’s not an upsell. It’s what the camera shows.

Our Main Richardson Services

Two services account for most of the calls we handle in Richardson, and both are shaped by the same local reality: aging attic ductwork in homes built before modern sealing standards existed.

Air Duct Cleaning in Richardson

A full air duct cleaning in Richardson means negative-pressure extraction on every supply and return run, with the inside of each run photographed before and after. In a 1970s Canyon Creek ranch, expect the camera to show a 2 to 3 inch debris build-up at the first elbow, often mixed with fiberglass particles from a degrading duct board liner. The work takes three to five hours depending on the number of runs, and you receive a documented photo record of every duct as a standard deliverable. Read the full breakdown on our Air Duct Cleaning in Richardson page.

HVAC Cleaning in Richardson

HVAC cleaning in Richardson covers the blower assembly, evaporator coil, plenum, and condensate pan, areas where North Texas pollen and attic dust accumulate fastest. On 40-year-old systems still running original components, the coil often carries a mat of oak and elm pollen that cuts airflow and forces the compressor to work harder through every 100-degree August afternoon. We pull the blower, clean the housing, document the condition, and put a written scope in your hand before work begins. Details are on our HVAC Cleaning in Richardson page.

Before

After

Dryer Vent Cleaning in Richardson

Dryer vent cleaning in Richardson costs $89-$189 for a standard run and should be done every 12 months in homes built before 1990. The reason is specific: original 1960s-1980s dryer vents in Richardson ran straight through the attic, and after 40 to 55 years of Texas heat cycling, the metal has shifted, the joints have separated, and lint has packed into every seam. What starts as a slow-drying load becomes a fire hazard inside a vent run nobody sees. Our Dryer Vent Cleaning service starts with a camera inspection so you see the condition before any work is quoted.

Dryer Vent Inspection

Signs you need it

Clothes take two or more cycles to dry, the dryer exterior gets hot to the touch, or you smell a musty burning odor while the machine runs.

What it costs in Richardson

A camera inspection runs $75-$125 in Richardson and is credited back toward cleaning if the run needs work.

How we do it

We run a camera through the entire vent from dryer to exterior termination point, measuring airflow with an anemometer at both ends to isolate where the restriction sits.

Lint Removal

Signs you need it

Visible lint builds up around the exterior vent flap, the dryer shuts off mid-cycle from overheating, or your drying time has doubled over the last six months.

What it costs in Richardson

Standard lint removal runs $89-$189 depending on vent length and access from the attic or roof.

How we do it

Rotobrush auger lines with reversible rotation pull compacted lint out of the full run, then a HEPA-filtered negative-air machine captures anything the brush dislodges before it enters the house.

Vent Rerouting

Signs you need it

Your current vent run exceeds 25 feet, bends more than twice, terminates under the eaves, or runs vertically through the attic where problems are hardest to spot.

What it costs in Richardson

Rerouting a vent to code in Richardson runs $250-$550 depending on run length and whether new roof or soffit termination is needed.

How we do it

We map the shortest code-compliant path, replace flexible foil with rigid 4-inch galvanized duct, and re-terminate to an exterior wall or roof cap with a pest-proof bird guard.

What Dryer Vent Cleaning Costs in Richardson

How often should a dryer vent be cleaned in Richardson?

Every 12 months for most Richardson homes, and every 6 months if the vent run is over 20 feet or passes through the attic. Homes with original 1960s-1980s vents running through unconditioned attic space collect lint faster because the metal expands and contracts with every thermal cycle, leaving seams where debris catches. Call (806) 606-6902 for a written quote.

Why is my dryer still slow after cleaning the lint trap?

Because the trap only catches what reaches it. In Richardson ranches, the visible lint is often a fraction of what’s packed into the attic run. The vent itself is the bottleneck, and that’s what our camera inspection documents before any cleaning begins.

Duct Repair & Sealing in Richardson

Duct repair and sealing in Richardson addresses what 40 to 55 years of attic heat does to original duct board and early flex duct: liners collapse, mastic seals fracture, and conditioned air leaks into a 145°F attic instead of reaching your bedrooms. In Canyon Creek and Breckinridge, the camera regularly shows duct board with a liner so brittle it flakes on contact, turning what a homeowner expected to be a simple cleaning into sealing and partial replacement. Our Duct Repair & Sealing service starts with a static pressure test so we know how much air your system is losing before we touch anything.

Duct Sealing

Signs you need it

Some rooms never reach the set temperature, your electric bill climbs every summer, or you can feel airflow in the attic when the blower is running.

What it costs in Richardson

Sealing accessible duct connections in Richardson runs $300-$600 depending on the number of runs and how many joints have separated.

How we do it

We locate every leak with a pressure test, then apply mastic sealant to all accessible joints and test again to confirm the static pressure drop.

Flex Duct Repair

Signs you need it

You spot collapsed or kinked flex runs in the attic, or one room gets weak airflow while others blast cold air.

What it costs in Richardson

Replacing a collapsed flex duct run in Richardson runs $150-$450 per run depending on diameter and attic access.

How we do it

We remove the failed flex section, install new R-6 or R-8 rated duct sized to the run, seal both ends with mastic, and photograph the finished connection for your record.

What Duct Repair & Sealing Costs in Richardson

How do I know if my ducts need sealing or just cleaning?

If rooms stay unevenly heated or cooled after cleaning, sealing is the answer. Cleaning removes debris inside the run; sealing stops conditioned air from escaping through the joints. In Richardson attics, both usually need doing, which is why our written quote covers the full scope before work starts.

Does duct sealing actually lower energy bills in Richardson?

Yes, measurable. When 20 to 30 percent of conditioned air is leaking into a 145°F attic, your compressor runs longer to hit the thermostat setting. Sealing those joints puts that air back into the rooms you paid to cool.

Air Quality & Sanitizing in Richardson

Air quality and sanitizing in Richardson targets what the camera finds before anyone sprays anything: friable fiberglass particles from degrading 1960s duct board, mountain cedar pollen that floods the DFW basin every December through February, and mold spores that take hold in ductwork that’s been holding attic humidity for decades. A home in Canyon Creek with original duct board isn’t just dirty. It’s actively introducing particulate into the air you breathe every time the blower cycles on. Our Air Quality & Sanitizing service documents what’s present, treats it, and photographs the result.

Mold Treatment

Signs you need it

You smell a musty odor when the system first kicks on, you see dark staining around supply registers, or family members have unexplained respiratory irritation inside the home only.

What it costs in Richardson

Mold treatment for ductwork in Richardson runs $400-$900 depending on the scope and whether the blower and coil are included.

How we do it

We identify the moisture source first, treat the affected surfaces with an EPA-registered antimicrobial, and photograph every treated section before and after application.

UV Light Installation

Signs you need it

Mold keeps returning after treatment, the evaporator coil develops biofilm between annual cleanings, or a household member has allergies or respiratory concerns exacerbated by indoor air.

What it costs in Richardson

UV light installation in Richardson runs $600-$1,000 depending on system size and whether one lamp or a coil-and-duct dual-lamp configuration is needed.

How we do it

We mount the UV lamp directly above the evaporator coil in the plenum, wire it to run continuously, and install a viewport so you can verify operation without opening the panel.

What Air Quality & Sanitizing Costs in Richardson

Is sanitizing worth it if my ducts are original from the 1970s?

Sanitizing helps only after the source of contamination is addressed. If original duct board is shedding friable fiberglass, sanitizing treats what’s growing on the surfaces but won’t stop the shedding. The written quote you get from us covers what’s needed in the correct order, not just the service you called about.

How long does duct sanitizing last in Richardson’s climate?

Six to twelve months for most homes, shorter if the attic retains moisture or the system pulls heavy cedar pollen loads each December through February. We document every application with photos so you have a record of exactly what was treated and when.

Brands We Service in Richardson

We stock replacement parts for most major HVAC equipment across Richardson homes, including Guardsman drain pans, Honeywell UV lamps, and Rotobrush vent-cleaning components. If a part isn’t on the truck, our local supply chain in the Dallas-Fort Worth metro typically gets it to your Richardson address within one to two business days. See the full list on our brands page.

Pricing for Air Duct Cleaning in Richardson, TX

Neighborhoods We Serve in Richardson

We work every part of Richardson, from the 1960s ranch clusters in Canyon Creek and Breckinridge to the Telecom Corridor adjacent streets near UT Dallas and the larger estate lots around Prairie Creek. Typical scheduling lead time for Richardson jobs is one to three business days, depending on whether the work requires a multi-person crew and how many runs are in scope.

• Canyon Creek
• Breckinridge
• Heights Park
• Prairie Creek
• Richardson Heights

Service Area - Cities Near Richardson

CleanRun Air Duct Cleaning serves Richardson and the surrounding DFW metro. If you live just outside Richardson, you can find the same written-price standard and documented photo record in Plano, TX, Garland, TX, Carrollton, TX, and Sachse, TX. Each page covers the local conditions specific to that city, including housing stock and climate considerations that affect pricing.

FAQs About Air Duct Cleaning in Richardson

How quickly can you get to a Richardson home?

Most Richardson jobs are scheduled within one to three business days. Attic-only duct runs in single-story ranches can often be quoted and completed the same week. Call (806) 606-6902 and we’ll give you a written window and a confirmed arrival time.

Do I need HOA approval to replace ductwork in Richardson?

Interior duct replacement and sealing typically requires no HOA approval since the work happens inside the attic or walls. Exterior vent terminations, like a new dryer vent exit or roof cap, may need sign-off in some Richardson subdivisions. The written scope we provide includes exactly what changes outside the envelope so you can check your HOA docs before we cut anything.

What if my house still has the original 1970s ductwork?

Then expect cleaning, sealing, and likely partial replacement in the same scope. Original fiberglass duct board from the 1970s is almost always brittle by now, and the liner flakes once a brush touches it. Your written quote covers what’s needed in order: seal first, clean second, and replace what can’t be restored. That’s how we keep your cost honest and the result verifiable.