Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Staten Island
HVAC cleaning in Staten Island typically costs $390-$680 for a full system on a 1960s-1980s South Shore home, and most jobs take one full day when a blower and evaporator coil are included. If you live in New Dorp, Tottenville, or anywhere along Hylan Boulevard, you already know the island’s salt air and summer humidity put real strain on forced-air systems. Our HVAC Cleaning team works on Staten Island every week, and we answer the phone live at (806) 606-6902.
Why CleanRun Air Duct Cleaning Is Staten Island’s Preferred HVAC Cleaning Company
Staten Island is different from every other borough, and the work we do here reflects that. Most of the homes we service were built between the Verrazzano Bridge opening in 1964 and the late 1980s, when tract development swept from New Dorp down to Tottenville. These houses were the first generation of NYC residential construction to get central forced-air HVAC as standard equipment, and fifty to sixty years later, those galvanized ducts and original blower assemblies are still in service. We know what that looks like inside because we photograph every duct run before we touch it and again when we finish. Tomas Reyes, who leads our team, has built our entire process around the written record: you get a price in writing before any work starts, and a Documented Photo Record of every run when the crew leaves.
No vague promises. No tech who can’t explain what he found. Our technicians are background-checked, uniformed, and named before they arrive, and every job is backed by the 365-Day Done Right Promise in writing. If you’re comparing quotes from other HVAC Cleaning in Staten Island companies, bring us their written estimate. We’ll put our number next to it, line by line, at no cost.
What Our Staten Island Customers Tell Us
The most common thing we hear after a job on the South Shore is that nobody had ever shown them the inside of their own ducts before. A homeowner on Amboy Road in Great Kills told us she’d had her ducts “cleaned” by a $79 coupon company two years prior and the camera still showed a three-inch debris build-up at the first elbow. That’s the difference between running a vacuum hose through a register and doing the actual job: negative-pressure extraction with agitation tools, followed by a photographic record. We don’t ask you to trust us. We show you.
Our HVAC Cleaning Services in Staten Island
We don’t sell a flat “HVAC cleaning” visit. We clean the specific components that determine whether your system actually moves air and removes humidity. On Staten Island, where salt-laden air from the Kill Van Kull and Arthur Kill accelerates corrosion and summer humidity feeds mold growth, the following four services cover most of what we do.
Evaporator Coil Cleaning
Your evaporator coil sits inside the air handler and is the single biggest airflow restriction in a Staten Island home when it’s dirty. The coil condenses moisture out of humid harbor air all summer, and that wet surface traps dust, pet hair, and biological growth into a paste that blocks heat transfer. We pull the access panel, photograph the coil, apply a non-acidic coil cleaner, and rinse with low pressure so fins aren’t bent. A typical evaporator coil cleaning on a South Shore split system runs $180-$260.
Blower Cleaning
Most 1960s-1980s tract homes on Staten Island have never had their blower wheel pulled. The blower wheel accumulates a layer of compacted dust on its cupped fins, which reduces the amount of air the fan can move across the coil and through the ducts. We remove the blower assembly, clean the wheel and housing, and check the motor amp draw before reinstalling. On Staten Island homes where the blower hasn’t been serviced in a decade or more, the before-and-after photos are often the most dramatic part of the job. Blower cleaning runs $140-$200 when done as part of a full HVAC cleaning.
Condenser Cleaning
The outdoor condenser unit on Staten Island takes a beating from salt air, pollen, and the cottonwood that blows through Mid-Island neighborhoods in late spring. Salt corrosion on the coil fins reduces the system’s ability to reject heat, which raises your electric bill and shortens compressor life. We clean the condenser coil with a foaming cleaner, straighten badly bent fins, and check refrigerant pressures. Condenser cleaning alone typically runs $120-$180 on the island.
Air Handler Cleaning
The air handler is the box that contains the blower and coil, and on Staten Island’s sandy South Shore it also collects fine sediment that gets pulled in through return ducts. After flood events, the air handler is often where the most serious contamination settles, because it sits low. We clean the interior cabinet, drain pan, and condensate line, then fog the cabinet with an EPA-registered antimicrobial when moisture damage is present. A full air handler cleaning runs $250-$350 depending on access.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Staten Island
We service all major residential HVAC equipment, and we carry the consumables and replacement parts that keep Staten Island systems running between cleanings. That includes Guardsman antimicrobial coatings for flood-prone air handlers, Rotobrush and Nikro agitation and negative-pressure extraction equipment for the duct cleaning itself, and Honeywell filtration components when a homeowner wants to upgrade their return-air filter after we leave. You don’t have to take our word on the equipment either; every brand we use is one you can look up independently and verify what it does. If your system uses proprietary parts we don’t stock on the truck, we order them the same day and schedule the follow-up before we leave the driveway.
Common HVAC Cleaning Problems We See in Staten Island Homes
- Sandy-era ducts that were dried in place, never sanitized. After the 2012 storm surge, thousands of South Shore homes had water in their sub-floor duct trunk lines. Many were dried out with fans and dehumidifiers and never cleaned, which left mold spores dormant until the next humid summer. We open registers in fully renovated houses on Midland Beach and Oakwood Beach and find the duct work still carrying contamination from thirteen years ago.
- Pinhole corrosion in original galvanized ducts. Salt-laden air from the Kill Van Kull and Arthur Kill works on bare sheet metal for decades. The result is pinhole leaks that pull unconditioned, humid air into the return side of the system. Your AC works harder and the air it delivers is wetter than it should be.
- Blower wheels that have never been pulled. On 1960s-1980s South Shore tract homes, we routinely find blower wheels so loaded with dust that the fan can’t move its rated airflow. The system runs longer, cools less, and costs more to operate.
- Mold in flexible duct liners. Interior fiberglass liners in older flex ducts absorb moisture during Staten Island’s humid summers. Once mold establishes itself in the liner, mechanical cleaning cannot fully remove it, and replacement is the only honest answer. We document this with the camera so you can see the difference.
Pricing for HVAC Cleaning in Staten Island, NY
We publish our price ranges because Haven Standard Clause 1 is the whole point: you should know the number before you invite us onto the property. A complete HVAC cleaning on a typical Staten Island detached home runs $390-$680, depending on the number of air handlers, the condition of the blower and evaporator coil, and whether antimicrobial fogging is required. Evaporator coil cleaning alone is $180-$260. Blower cleaning is $140-$200. Air handler cleaning is $250-$350. Condenser cleaning is $120-$180. We give you a written price before a single panel comes off, and that price doesn’t change when the crew arrives. Call (806) 606-6902 for an exact written quote.
We Also Serve Cities Near Staten Island
CleanRun coordinates scheduling from our New York City office and crews serve Staten Island directly. We also take HVAC cleaning jobs in Brooklyn, Manhattan, Jamaica, and Astoria. If you’re in one of those areas and want the same written-price, documented-photo standard, call us and ask.
Serving Staten Island, NY - Our Local Coverage Area
We’re based in the Staten Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Staten Island
If the ducts were properly dried and the system has been running continuously since 2012 without recurring mold odors or visible growth at the registers, mechanical cleaning with antimicrobial fogging is often enough. If the camera shows water staining, rust blooms, or mold colonies entrenched in the duct liner, the liner can’t be mechanically cleaned and replacement is the only defensible option. We’ll give you the camera record either way, so the decision is based on evidence, not opinion. Call (806) 606-6902 to schedule a documented inspection.
Because those homes were built with forced-air systems as original equipment, and the outdoor condenser coils have been exposed to Staten Island’s salt-laden harbor air for forty to fifty years. Salt corrosion on the coil fins reduces heat transfer efficiency, and when combined with the island’s summer humidity, it accelerates the buildup of biological growth on the evaporator side. A standard rinse won’t cut it; these systems need a foaming coil cleaner and often fin straightening.
Yes, but the condition of the metal matters. Galvanized ducts from the 1960s can develop pinhole corrosion from decades of salt air exposure, and aggressive mechanical agitation can worsen existing damage. We inspect with the camera first, and if the ducts are structurally sound, we clean them with controlled agitation and HEPA-filtered negative pressure. If the camera shows extensive corrosion, we’ll tell you replacement is the better long-term move and you’ll have the photos to prove it.
No. When an air handler sits in floodwater, the blower motor, wheel, cabinet, drain pan, and often the controls are all affected. Blower cleaning addresses the wheel and housing only. A wet air handler needs a full cabinet cleaning, drain line purge, motor inspection, and antimicrobial fogging, and even then the motor may need replacement if it sat submerged. We’ll open the unit, photograph it, and write up exactly what we find before we do any work.
Use a MERV 8 filter as the baseline on most Staten Island residential systems. MERV 8 catches the fine dust and salt particles that pass through standard fiberglass filters without imposing the airflow restriction of a MERV 13, which can choke older blowers on 1960s-1980s equipment. If someone in the home has allergies or asthma, a MERV 11 is a reasonable step up, but check the blower’s static pressure tolerance first. We’ll check it during the cleaning and tell you exactly what your system can handle. For a written quote on your HVAC cleaning, call (806) 606-6902.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Staten Island since 2013.