Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Hammond, IN
Dryer vent cleaning in Hammond addresses a problem most other cities never see: industrial particulate from the Whiting Refinery and the Calumet River steel corridor that works its way into clogs alongside household lint, hardening into a dense, sometimes oily deposit that standard brushing won’t clear. Homes here are overwhelmingly 1920s to 1950s brick bungalows with original galvanized ductwork and tight mechanical closets, which means vent runs are often longer and more restrictive than modern builds. Call CleanRun at (806) 606-6902 for a written price before any work begins.
Why Hammond Homes Are Different
Hammond sits directly adjacent to the BP Whiting Refinery and the legacy Calumet River manufacturing corridor, and the residential ductwork here tells that story. Technicians working blocks closest to the industrial corridor routinely pull debris with a reddish-orange iron oxide tint and an oily, petroleum-adjacent film, a telltale signature of refinery and former mill neighbors. That deposit is chemically distinct from the gray fibrous lint typical of residential jobs elsewhere in the Chicago metro, and it requires more aggressive agitation and filtration to remove. Positioned at the southern tip of Lake Michigan, Hammond also experiences prolonged lake-effect winters that keep homes sealed for five or more months, concentrating airborne particulates indoors and creating the high-humidity conditions in ductwork that accelerate mold growth, especially in the basement supply plenums common to the era’s construction.
The housing stock compounds the issue. Most homes are working-class brick bungalows and two-story frame houses built between 1920 and 1950 to house steelworkers and refinery employees. Their original galvanized sheet-metal ducts were undersized even when new, and decades of industrial-era deposits have baked into seams and joints. Piecemeal furnace replacements over the years frequently left original duct runs untouched, meaning older contamination layers coexist with newer equipment. When we open a plenum in Robertsdale or Hessville, what we find inside is rarely just household dust.
Our Main Hammond Services
Two services account for most of the calls we schedule in Hammond, and both are shaped by the city’s industrial air and aging housing stock.
Air Duct Cleaning in Hammond
Hammond’s proximity to the refinery and former mill sites means residential supply and return runs accumulate iron oxide dust and petroleum aerosols that ordinary vacuuming cannot lift. In homes from the 1920s to 1950s where original galvanized ductwork is still in place, those deposits lodge in seams and joints and require negative-pressure extraction with rotary agitation. Every run is photographed before and after, and the photo record is delivered as part of the standard job file. Air Duct Cleaning in Hammond is the single most requested service in this market because the contamination is not optional maintenance, it is an indoor-air-quality necessity.
HVAC Cleaning in Hammond
When a Hammond furnace was replaced but the original duct runs were left untouched, the result is newer equipment pushing air through older contamination. HVAC cleaning here includes the evaporator coil, blower assembly, and the supply-and-return trunk, and in this climate the coil is frequently layered with a fine sticky particulate film from industrial neighbors. HVAC Cleaning in Hammond returns the system to its rated pressure and gives the homeowner a documented record of what was removed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterDryer Vent Cleaning in Hammond
Dryer vent cleaning in Hammond fights a double clog. Household lint is the baseline, but in the blocks nearest the BP Whiting Refinery and the Calumet industrial corridor, vents also accumulate fine petroleum aerosols and iron oxide dust that bind the lint into a denser, harder deposit than what suburban crews typically encounter. Most Hammond dryers vent through original 1920s-to-1950s construction with vent runs that are longer and more restrictive than modern code would allow, and when that restrictive path meets industrial particulate, the result is a clog that standard brushing will not clear. On every visit we photograph the inside of the vent run before and after, so the difference between real work and vacuum noise is on record. Dryer Vent Cleaning in Hammond should be treated as an essential service, not a once-a-decade afterthought.
Dryer Vent Inspection
Signs you need it
Clothes are taking longer than 45 minutes to dry, the dryer feels hot to the touch, or you cannot remember the last time the vent was looked at in your Hammond home.
What it costs in Hammond
A documented dryer vent inspection in Hammond runs $109 to $189, covering camera push-through and written findings on vent material, termination, and airflow.
How we do it
We run a camera through the full vent run, measure airflow at the termination, and deliver a written report with photos showing the interior condition and any clogs or gaps.
Vent Cleaning
Signs you need it
The dryer runs but airflow at the exterior vent is weak, or a visible lint build-up is blocking the termination.
What it costs in Hammond
Full dryer vent cleaning in Hammond ranges from $129 to $199, depending on vent length and the density of the industrial-adhesive deposit.
How we do it
A rotary brush and HEPA-filtered vacuum remove the lint-and-iron-oxide deposit from the full run, and we photograph the interior before and after as part of the job record.
Lint Removal
Signs you need it
The lint trap is clean but the dryer still struggles, indicating a build-up deeper in the run.
What it costs in Hammond
Targeted lint removal in Hammond is $129 to $179, and covers clog removal from the vent interior and termination point.
How we do it
We remove the accumulated deposit with rotary agitation and extraction, then re-test airflow and photograph the cleared run.
Vent Rerouting
Signs you need it
The current vent run exceeds 25 feet, uses flexible plastic, or passes through an unheated space where condensation causes lint to stick and accumulate.
What it costs in Hammond
Vent rerouting in Hammond ranges from $280 to $460, depending on termination location and whether rigid metal duct replaces the existing path.
How we do it
We plan a shorter, code-compliant route using rigid metal duct, install the new run, and document the termination and interior with the photo record.
Bird Guard Installation
Signs you need it
You hear birds near the vent, see nesting material at the termination, or the flap does not close after the dryer finishes.
What it costs in Hammond
A bird guard installed on a Hammond dryer vent is $85 to $140, including the part and the labor to secure it over the termination.
How we do it
We secure a corrosion-resistant guard over the exterior termination so birds and rodents cannot enter, then photograph the finished installation.
What Dryer Vent Cleaning Costs in Hammond
| Item | Typical range in Hammond |
|---|---|
| Dryer vent inspection | $109-$189 |
| Dryer vent cleaning | $129-$199 |
| Bird guard installation | $85-$140 |
Hammond prices run slightly above the national average because of vent length in older bungalows and the density of the industrial-adhesive deposit near the refinery corridor. Every price is written down before work starts, under Haven Standard Clause 1.
How often should a dryer vent be cleaned in Hammond?
Every 12 months. Homes closer to the Calumet industrial corridor may need it every 8 to 10 months because petroleum aerosols and iron oxide dust bind the lint and make clogs form faster than in suburban neighborhoods. Call (806) 606-6902 for an exact quote.
Why does my Hammond dryer vent clog faster than it did at my previous home?
The refinery and former mill airborne particulate combines with lint to form a denser, stickier deposit, and older vent runs are longer and more restrictive than modern code allows. Call (806) 606-6902 and we will photograph the inside of your vent to show you exactly what is building up.
Duct Repair & Sealing in Hammond
Duct repair and sealing in Hammond addresses the original galvanized sheet-metal ductwork installed in most 1920s to 1950s bungalows, which was undersized even when new and has spent decades accumulating industrial deposits and developing leaks at seams and joints. When a furnace was replaced but the original duct runs were left untouched, newer equipment ends up pushing air through a compromised path, losing pressure into wall cavities and crawl spaces. Duct Repair & Sealing in Hammond is the difference between paying to condition the rooms and paying to condition the walls.
Duct Sealing
Signs you need it
Rooms at the end of the run are noticeably cooler in winter or warmer in summer than the rest of the house in Hammond homes with original galvanized ductwork.
What it costs in Hammond
Duct sealing in Hammond runs $800 to $1,800 per system, depending on how many seams and joints need to be treated.
How we do it
We locate leaks with a pressure test, then seal seams and joints with mastic or mastic-and-fiberglass tape at every opening in the run.
Flex Duct Repair
Signs you need it
A flex duct has collapsed, torn, or sagged between the branch and the register, choking airflow in one corner of the home.
What it costs in Hammond
Flex duct repair in Hammond is $285 to $480 per section, depending on access and the length of damaged run.
How we do it
We disconnect the damaged section, replace it with new insulated flex, reattach it with sealed collars, and photograph the interior before sealing everything up.
Metal Duct Repair
Signs you need it
A section of sheet-metal duct has rusted through, separated at a joint, or been crushed in a crawl space or utility chase.
What it costs in Hammond
Metal duct repair in Hammond ranges from $420 to $750 per section, depending on the sizing and access difficulty.
How we do it
We remove the damaged section, install new galvanized sheet metal matched to the original dimensions, and seal all joints with mastic.
Mastic Sealant
Signs you need it
You can see old tape or caulk peeling away from the seams, or dust and insulation are visible inside the run at the joints.
What it costs in Hammond
Mastic sealant application in Hammond is $450 to $900 per system, depending on the number of accessible seams and the total length of the run.
How we do it
We brush on a UL-listed mastic product over every joint and seam from the plenum to the register, then photograph each treated section.
What Duct Repair & Sealing Costs in Hammond
| Item | Typical range in Hammond |
|---|---|
| Duct sealing (per system) | $800-$1,800 |
| Flex duct repair (per section) | $285-$480 |
| Metal duct repair (per section) | $420-$750 |
Repair pricing in Hammond is driven by access, not age. A basement trunk in a bungalow is easier to reach than a run squeezed through a finished ceiling in a 1950s two-story, and older homes often need more seams treated than newer construction.
Can you seal ducts without replacing them in a Hammond home?
Yes. Mastic and mastic-and-fiberglass tape applied to the original 1920s-to-1950s galvanized ducts in Hammond homes can resolve most leaks without tearing out walls. Call (806) 606-6902 for a written scope and price.
Why are my upstairs rooms never warm enough in a Hammond winter?
Lake-effect winters keep Hammond homes sealed for five or more months, and older duct runs often leak heavily before air reaches the upper floor. A pressure test will show us exactly where the loss is happening. Call (806) 606-6902.
Air Quality & Sanitizing in Hammond
Air quality and sanitizing in Hammond responds directly to the city’s industrial air. Refinery and legacy mill particulate that enters through open windows, doors, and foundation cracks settles inside ductwork and combines with the high-humidity conditions of lake-effect winters to support mold and bacterial growth in basement supply plenums common to 1920s-to-1950s construction. The air inside a sealed Hammond home is often carrying more industrial particulate than the air outside, and Air Quality & Sanitizing is a documented response, not a scented fog-and-leave.
Mold Treatment
Signs you need it
A visible bloom on the plenum, a persistent musty odor from the registers in the basement, or a lab test that identified mold spores in the home.
What it costs in Hammond
Mold treatment in Hammond runs $590 to $1,480, depending on the liner area requiring cleaning and the severity of the visible growth.
How we do it
We physically remove the visible growth with HEPA-filtered agitation, treat the surface with a manufacturer-specified antimicrobial under the label directions, and photograph the plenum before and after.
Bacteria Sanitizing
Signs you need it
Occupants are experiencing unexplained respiratory irritation, or standing water was present in the system within the last year.
What it costs in Hammond
Bacteria sanitizing in Hammond ranges from $290 to $540 per system, depending on the square footage and the number of plenums treated.
How we do it
We fog a non-bleach, non-corrosive sanitizer through the supply and return runs using equipment from Abatement Technologies, then document the application and the treated surfaces.
Odor Removal
Signs you need it
A persistent odor of pet, decay, or industrial solvent returns whenever the system runs, even after standard cleaning.
What it costs in Hammond
Odor removal in Hammond is $310 to $580, covering the source identification, treatment, and post-treatment evaluation.
How we do it
We locate the source of the odor with a camera inspection, treat the surfaces with an appropriate neutralizer, and leave a written note describing what we found and treated.
UV Light Installation
Signs you need it
The evaporator coil has visible microbial growth year after year, or someone in the home has a documented sensitivity to airborne mold and bacteria.
What it costs in Hammond
UV light installation in Hammond runs $980 to $2,400, including the lamp, the mounting, and the electrical tie-in.
How we do it
We install the manufacturer-specified UV lamp near the evaporator coil using a Honeywell or Aprilaire system, then confirm the lamp is operating and photograph the installation.
What Air Quality & Sanitizing Costs in Hammond
| Item | Typical range in Hammond |
|---|---|
| Mold treatment | $590-$1,480 |
| Bacteria sanitizing | $290-$540 |
| UV light installation | $980-$2,400 |
Air quality pricing in Hammond is driven by what the camera shows us inside the plenums. A basement plenum that has accumulated dampness and industrial film for decades costs more to treat than a clean one, and we write the price down before the first panel comes off.
Can air quality work actually help in a Hammond home near the refinery?
Yes. Sealing and cleaning the ductwork reduces the reservoir of industrial particulate that re-suspends every time the system cycles, and the photo record we deliver will show exactly what was removed. Call (806) 606-6902 for a written scope.
Do you test for mold before treating it in Hammond?
We do not run the lab test, but we will photograph the visible growth and document the conditions. If you have a lab report, we work from it to scope the treatment and the equipment. Call (806) 606-6902 and we will walk you through the process.
Brands We Service in Hammond
We stock parts and filters for Honeywell, Aprilaire, and Guardsman systems so a UV lamp replacement or media cabinet swap in Hammond does not wait on a shipment. Our brands page lists the full equipment roster, and common components are on the truck.
Pricing for Air Duct Cleaning in Hammond, IN
| Service | Typical range in Hammond |
|---|---|
| Residential air duct cleaning | $495-$940 |
| Dryer vent cleaning | $129-$199 |
| HVAC cleaning | $450-$900 |
| Duct sealing (per system) | $800-$1,800 |
| Flex duct repair (per section) | $285-$480 |
| Metal duct repair (per section) | $420-$750 |
| Duct insulation (per section) | $240-$420 |
| Mold treatment | $590-$1,480 |
| Bacteria sanitizing | $290-$540 |
| Odor removal | $310-$580 |
| UV light installation | $980-$2,400 |
| Air purifier install | $720-$1,780 |
What pushes a Hammond price toward the upper end is access and deposit density. A long flex run in a finished 1950s ceiling costs more to clean or repair than a short, open basement trunk in a bungalow, and the oily refinery film closest to the Calumet corridor requires more passes. Every price here is a written range agreed before work starts, under Haven Standard Clause 1.
Neighborhoods We Serve in Hammond
We work across Hammond, from the brick bungalows of Robertsdale to the two-story frames of Hessville and the industrial-adjacent blocks near the refinery. Our crews schedule Hammond work within one to two weeks, and we will always give you a date before a written price.
- Robertsdale
- Hessville
- Downtown Hammond
- Woodmar
- Calumet
Service Area - Cities Near Hammond
CleanRun serves Hammond and the surrounding communities across the greater Calumet Region. If you are in Gary, IN, Westfield, NJ, Zionsville, IN, or Noblesville, IN, our written-price standard and documented photo record still apply.
Serving Hammond, IN - Our Local Coverage Area
We’re based in the Hammond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Hammond
Most Hammond appointments are scheduled one to two weeks out. We coordinate dispatch from the brand’s Indianapolis office, and crews serve Hammond locally, so no third-party subcontractors. Call (806) 606-6902 and we will give you a date and a written price in the same conversation.
Routine cleaning and sealing do not require a permit in Hammond. Only work that involves structural changes or moving mechanical equipment may trigger a permit, and for those jobs we will tell you in writing before any work starts.
Can you work in the older brick bungalows in Hammond?
Yes, and most of the homes we serve in Hammond are exactly that. The original galvanized ducts in those bungalows are accessible from the basement in almost every case, and we clean or repair them without cutting into finished walls. Call (806) 606-6902 for a written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hammond Customers Say
"The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M."They found a disconnected duct in the crawl space that had been dumping conditioned air under the house for years. Photographed it, quoted the repair, fixed it."
- Devon A."On time, professional, and explained what the readings meant without talking down to me."
- Warren E.