Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Duct Cleaning Across Madera
Air duct cleaning in Madera typically runs $425-$680 for a full single-system home, and most jobs are completed in a single day. That’s the honest range you should expect from a company that actually cleans ducts rather than waving a vacuum hose around. If you live off Cleveland Avenue, near the high school, or out toward the newer developments east of Highway 99, you already know what valley air does to a home. Call (806) 606-6902 and you’ll get a written price before any work starts, no exceptions.
Madera’s air isn’t like Fresno’s or Clovis’s. Our crews work in Madera every week, and we know exactly what harvest season does to the ductwork in homes near Almond Avenue, Parksdale, and the county roads that run between orchards and dairies. You don’t need a lecture about indoor air quality. You need someone who can show you what’s inside your ducts, write down a price, and fix it.
Why CleanRun Air Duct Cleaning Is Madera’s Preferred Air Duct Cleaning Company
We built CleanRun in 2013 on a simple observation: the duct cleaning industry runs on $79 coupons and shop-vac noise. Homeowners in Madera deserve better. That’s why every job we do starts with a written price, includes a documented photo record of every duct run before and after, and is backed by our 365-Day Done Right Promise in writing. Not as a slogan. As a contract clause.
What does that look like in practice? When we work in a 2003-era track home near Madera South High School, we photograph the inside of the supply ducts before we touch anything. Then the return side. Then the plenum. You see the debris build-up, the insulation fibers, the harvest dust caked at the first elbow. After the job, you get the same photos again. Clean. That’s the record Tomas Reyes signs off on for every Madera job. No other company serving Madera works that way as a standard practice.
Our technicians are background-checked, uniformed, and identified by name before they arrive. We run professional-grade equipment from Rotobrush and Nikro, not rental-shop vacuums. And every estimate is free. You call, you get a real person, and you get a written number. That’s Haven Standard Clause 1: written price before work begins. It’s not a promotion. It’s the rule.
Our Air Duct Cleaning Services in Madera

Madera’s housing stock splits into two broad categories, and each has its own failure patterns. Homes built in the 1990s and 2000s, especially the large tracts south and east of downtown, are mostly flex-duct systems routed through attics that hit 150°F in July. Older homes from the 1960s and 1970s near downtown Madera run sheet-metal ducts that haven’t been opened in decades. We clean both, and we tailor the approach to what’s actually there. Here’s what we do most often in Madera:
Residential Duct Cleaning
A full Air Duct Cleaning on a typical 1,800-2,400 sq ft Madera home includes all supply and return runs, the plenum, the blower cabinet, and the register boots. We use negative-pressure extraction with HEPA filtration to pull debris out of the system rather than blowing it around. In post-harvest season, we routinely remove 5-8 pounds of agricultural dust and chaff from a single system. That’s not an estimate. That’s what the waste containment bag shows when we’re done.

Commercial Duct Cleaning
Offices, medical suites, and restaurant kitchens around Madera’s commercial corridors run their HVAC hard from May through October. For businesses near the Madera Fairgrounds or along Yosemite Avenue, we schedule work around your operating hours and deliver a written scope plus photo documentation for your maintenance records. Commercial systems in Madera typically see heavier oil and grease loading in kitchen exhaust-adjacent duct runs, especially in older buildings downtown.

Supply Duct Cleaning
Supply ducts carry conditioned air from your blower into each room. In Madera homes with attic flex duct, these are the runs that sag at the joints and pull attic insulation into the airstream. Cleaning them without resealing the joints is a waste of your money. We clean and inspect every supply run, and if the camera shows separation at a joint, we tell you before we finish the cleaning. Not as an upsell. As a documented finding with a photo attached.

Return Duct Cleaning
Return ducts pull air back to the blower, and they’re the first place dust accumulates. In Madera, where winter Tule fog keeps humidity high and summer attic heat bakes the duct exterior, return runs tend to build a dense mat of dust that hardens against the metal. We see it constantly in the older sheet-metal systems near the east side of downtown. A rotary brush with HE filtration breaks that layer loose without sending it into your living space.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Madera
The equipment matters more than most Madera homeowners realize. We run Rotobrush and Nikro systems for negative-pressure extraction, and we stock replacement filters and components compatible with Honeywell and Guardsman equipment. You can look up any of those brands yourself and see they’re professional-grade tools, not consumer toys. There’s no mystery equipment in our trucks, and no mystery about what it does. If your system was installed with Guardsman components near a Madera new-build, we’re familiar with the configuration and we carry what we need to service it properly.
Common Air Duct Cleaning Problems We See in Madera Homes

These aren’t theoretical. These are the four failure modes we document in Madera homes every week:
- Post-harvest filter clogging. During fall almond and grape harvests, fine agricultural dust from surrounding Madera County orchards and vineyards loads the air so heavily that 1-inch pleated filters clog solid in under two weeks. Homeowners see a black filter and assume the system is dirty. Often the ducts are, too.
- Attic flex duct sagging and separation. In 150°F summer attics, flex duct loses rigidity and separates at joints. Once separated, the return side pulls cellulose insulation and rodent detritus directly into the air handler. This is the single most common mechanical defect we photograph in Madera homes built after 1995.
- Tule fog condensation inside ducts. Winter fog creates extended high-humidity periods. Under-insulated attic ducts develop condensation on the interior walls, which turns accumulated field dust into a damp, mold-friendly mat. This is not something a fogging sanitizer can fix.
- Decades of valley particulate bonding. Older sheet-metal systems in 1960s and 1970s homes near downtown Madera show a hardened grease-and-dust coating that requires mechanical agitation to remove. It doesn’t vacuum out. It has to be broken loose first.
Pricing for Air Duct Cleaning in Madera, CA
Here’s what Madera homeowners should expect to pay, in plain dollars. A standard single-system home under 2,000 sq ft runs $425-$550. Larger homes or systems with long attic runs run $550-$680. If you have a two-system configuration or significant flex-duct separation requiring joint resealing, the price rises accordingly and you’ll see exactly why before you agree to anything.
We don’t price per vent. We don’t run $79 specials that turn into $900 invoices once the truck is in your driveway. One written price per system, agreed before work starts, under Haven Standard Clause 1. If you have a written estimate from another company, bring it. We’ll put our number next to it in writing. That’s the Free Second Opinion, and it’s exactly what it sounds like. Call (806) 606-6902 for a free estimate on Air Duct Cleaning in Madera.
We Also Serve Cities Near Madera

Our crews serve Madera and the surrounding communities, including Fresno, Clovis, Sanger, and Selma. If you’re just outside Madera city limits or in one of the neighboring towns, the same pricing rules and documentation standards apply. We coordinate scheduling from our Central Valley office and dispatch Air Duct Cleaning crews to Madera homes every week.
Serving Madera, CA - Our Local Coverage Area
We’re based in the Madera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Madera

Every 2-3 years for most Madera homes, shifting to every 2 years if you live near active orchards or dairies on the county roads surrounding the city. The fall harvest season pushes more particulate into your ductwork in eight weeks than a coastal California home sees in a year. We recommend a post-harvest inspection every October, especially if your 1-inch filters are clogging in under two weeks. Call (806) 606-6902 and we’ll give you an honest assessment of whether your ducts actually need cleaning this year.
No. A fogging sanitizer coats surfaces but does not remove the damp, organic material that mold feeds on. In Madera’s Tule fog season, condensation inside under-insulated attic ducts wets accumulated field dust, and that damp mat is what mold colonizes. The fix is source removal: mechanical agitation and negative-pressure extraction to pull the contaminated material out, then resealing joints and addressing the insulation deficiency that caused the condensation. We photograph every step. We don’t fog and claim victory. If a company offers fogging as a mold “treatment” without source removal, you’re paying for perfume, not remediation.
Because Madera attics reach 150°F in summer, and flex duct loses rigidity at sustained temperatures that high. The lightweight outer jacket sags, the inner liner separates at the joint, and now your return side is pulling attic air, insulation fibers, and rodent debris into the blower. Cleaning alone won’t fix this. The joints have to be resealed with proper mastic and re-supported. We document the separation with video inspection before cleaning, reseal the joints, and then show you the after footage. It’s the only way to know the repair was done right.
If your ducts have been running during smoke events from Sierra Nevada wildfires, including the 2020 Creek Fire that burned within Madera County itself, they’ve likely pulled smoke particulates into the system. A genuine HEPA source-removal clean removes the trapped particulate that holds the odor. But if the smoke smell is coming from attic insulation or wall cavities, duct cleaning won’t address that. We’ll tell you the truth about what we can fix and what we can’t. That’s the whole point of the camera inspection. You see what we see.
In Madera during fall almond and grape harvests, yes. The surrounding Madera County agricultural operations load the air with such fine dust that a 1-inch pleated filter clogging solid in under two weeks is a common seasonal event. What it means for your ducts is that whatever your filter didn’t catch got pushed through the system and into the return runs. We recommend checking filters weekly during harvest season and scheduling a post-harvest duct inspection in October. If the ducts haven’t been cleaned in several years, this is when they’ll need it most. Call (806) 606-6902 to schedule a free estimate.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Madera since 2013.




Before
After
Before
After