Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable HVAC Cleaning Across Sheepshead Bay
HVAC cleaning in Sheepshead Bay means dealing with two things most neighborhoods never think about: salt air and old ductwork. The tidal inlet off Emmons Avenue pushes marine humidity into homes year-round, and the 1940s and 1950s brick two-families that dominate this neighborhood still have original sheet-metal runs that leak at every seam. A full HVAC Cleaning job here is not just about vacuuming dust. It is about finding what decades of moisture have done inside the system, documenting it, and sealing it so it stops happening. We are CleanRun Air Duct Cleaning, and we serve Sheepshead Bay with written prices before any work starts and a photo record of every duct run before and after. Call Tomas Reyes and the team at (806) 606-6902.
Why CleanRun Air Duct Cleaning Is Sheepshead Bay’s Preferred HVAC Cleaning Company
Since 2013, we have cleaned HVAC systems in more than 52,000 homes, and a big share of those are the brick two-families and semi-detached houses running north from the bay. Homeowners in Sheepshead Bay call us because we publish our license number on the page, not buried in a footer, and because every technician arrives background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Tomas Reyes has walked more basement air handlers on Avenues U through Z than we can count, and he knows exactly what the tidal inlet does to a blower motor sitting at grade level.
Our customers in Sheepshead Bay consistently mention one thing in reviews: the photo record. After every HVAC cleaning, you get images of the inside of every duct run, before and after. That is not a marketing promise. It is a deliverable we have included on every job since our first one in 2013. When a homeowner on Emmons Avenue sees a camera image of a 3-inch debris build-up at the first elbow, they know the work was real. That is the whole point of the HVAC Cleaning brand: evidence, not noise.
Our HVAC Cleaning Services in Sheepshead Bay
Evaporator Coil Cleaning
In Sheepshead Bay, the evaporator coil sits inside the air handler and does the work of pulling heat and moisture out of your air. Near the water, that coil stays damp. Salt-laden air deposits the fine gray film technicians see on coils in homes south of Avenue U faster than anywhere inland. We clean the coil with professional-grade equipment from brands like Abatement Technologies, documenting the before and after so you can see the difference between a clean coil and one that has been running wet since the last nor’easter.
Blower Cleaning
The blower motor pushes conditioned air through your supply runs. In the 1940s and 1950s homes that make up most of Sheepshead Bay, blower wheels clog with a mix of dust, salt film, and, in homes that took water during Sandy, fine silt. A clogged blower wheel drops airflow by 20 to 40 percent. We remove and clean the blower assembly, photograph it, and reinstall it. On a recent job south of Avenue Z, the blower wheel was caked with enough residue that the homeowner’s furnace had been short-cycling for two winters without her knowing why.
Condenser Cleaning
The condenser is the outdoor unit, and in Sheepshead Bay it takes a beating from salt spray, pollen off the marsh grass, and exhaust from traffic along Ocean Avenue. We clean the coil fins, clear debris, and check the refrigerant lines. A condenser packed with salt and cottonwood fluff runs hot and kills efficiency. For homes within blocks of the inlet, we recommend checking the condenser twice a year, not once.
Air Handler Cleaning
This is the service that matters most in Sheepshead Bay basements. The air handler sits at or near grade level, often in a basement that took water during Sandy. Persistent tidal humidity means the inside of the handler stays damp, and that is where mold colonizes. We open the cabinet, clean the plenum, the coil, and the blower, and we run a camera through the supply and return runs to document what is actually there. Haven Standard Clause 1 applies every time: a written price before a single panel comes off.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Sheepshead Bay
We work on equipment from Honeywell, Aprilaire, and Guardsman, which covers the majority of systems in Sheepshead Bay homes built between the 1940s and the 1980s. Because we are a local crew serving this neighborhood regularly, we keep common parts and filters on the truck for these brands, which means faster diagnosis. If your air handler has an Aprilaire filter housing or a Honeywell control board, our technicians know the unit. We run Rotobrush and Nikro extraction equipment for source removal, and Abatement Technologies HEPA filtration on every job. You can look up any of those names before you agree to a price.
Common HVAC Cleaning Problems We See in Sheepshead Bay Homes
- Sandy floodwater sediment inside reused ducts. After Sandy, many furnaces were replaced but the original ductwork was reused. That silty residue from 2012 is still inside supply runs on blocks south of Avenue Z, and homeowners have no idea because the ducts were never inspected, only patched cosmetically.
- Corroded sheet-metal seams. Original 1940s to 1960s ductwork leaks at every joint. In Sheepshead Bay that means salty marine air gets pulled into the living-space supply runs, corroding the metal from the inside out and depositing salt film on every surface the air touches.
- Mold on damp air handler interiors. Basement units at grade level wick up tidal-inlet humidity. The blower wheel and coil stay wet longer than they would in Midwood or Flatbush, and mold that grows there recirculates through the whole house every heating season.
- Crushed and disconnected flex runs. In older homes where duct sections were replaced on the cheap, flexible duct gets crushed under basement clutter or disconnected at the takeoff. We find these with a camera before we clean, because cleaning a disconnected run is pointless.
Pricing for HVAC Cleaning in Sheepshead Bay, NY
A full HVAC cleaning in Sheepshead Bay, including the air handler, evaporator coil, blower, and condenser, runs $425 to $675 for a typical two-family brick home. If we are adding duct sealing, which we almost always recommend on original sheet-metal runs, expect $900 to $1,500 depending on how many supply runs we are sealing. Air handler and coil cleaning alone runs $225 to $350. Condenser cleaning alone runs $125 to $200. Every job gets a written price before work begins, under Haven Standard Clause 1. You will see the exact number in writing, for your exact system, before a single panel comes off. No per-vent pricing, no bait coupon that turns into a bigger invoice once the van is parked on your block. Call Tomas at (806) 606-6902 for a written estimate based on your system, not a national average.
We Also Serve Cities Near Sheepshead Bay
Our crews work throughout HVAC Cleaning in Sheepshead Bay and the surrounding boroughs. That includes New York City, Brooklyn, Queens, and Manhattan. Scheduling is coordinated from our New York City office, and Sheepshead Bay gets local crews who know the tidal-inlet conditions specific to this neighborhood.
Serving Sheepshead Bay, NY - Our Local Coverage Area
We’re based in the Sheepshead Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - HVAC Cleaning in Sheepshead Bay
The short answer is you cannot tell from looking at the outside of the ducts. Post-Sandy floodwater sediment hides inside reused supply runs, often caked onto the bottom third of the duct. The only way to confirm is a camera inspection. On a brick two-family south of Avenue Z, we pulled the original 1950s sheet-metal supply runs and found flex-duct sections caked with sandy, silty residue, the unmistakable fingerprint of Sandy floodwater. The furnace had been replaced, but the old ductwork was reused and never cleaned. We ran a camera inspection, documented the crushed and disconnected runs, then performed full source removal with negative pressure and HEPA filtration before cleaning the evaporator coil and blower motor, and finished by sealing the supply and return ducts to keep marine moisture out. If you are not sure, call (806) 606-6902 and we will put a camera in your ducts before quoting anything.
Because Sheepshead Bay sits on a tidal inlet fed by the Atlantic Ocean, so ambient humidity runs higher than in inland Brooklyn neighborhoods two or three miles north. That chronic moisture load means dust and organic debris inside ducts stays damp longer, creating faster-cycling mold blooms than technicians see in drier zip codes. Your cousin’s house in Midwood does not have salt-laden marine air pushing into leaky sheet-metal seams year-round. We see this pattern constantly: same era house, same furnace, but the one near the water has black mold on the air handler interior while the inland one stays dry.
Yes, almost always. Original sheet-metal ductwork from the 1940s to 1960s leaks at every seam. In Sheepshead Bay those leaks pull salty marine air into the living-space supply runs, which corrodes the metal from the inside out and reintroduces moisture right after you cleaned. Sealing the seams with professional duct sealant is the fix that makes the cleaning last. Without it, you are paying for a clean that will be undone by the next humid summer. We quote sealing as part of the written price, so you know both numbers before deciding.
Yes. We clean the air handler and evaporator coil in place in almost every Sheepshead Bay basement. Our technicians access the coil through the existing service panel, use professional-grade cleaning agents and negative-pressure extraction to capture what comes off, and document the entire job with before and after photos of the inside of the cabinet. Removing the coil is only necessary in extreme cases, like when corrosion has eaten through the fins or the coil is too degraded to clean effectively. You will see the written price for either scenario before we start.
Every 3 to 4 years for homes within blocks of the tidal inlet, versus every 5 to 7 years inland. The persistent salt-laden marine humidity keeps dust and organic debris damp longer, which accelerates mold blooms and corrosion. Homes that took on floodwater during Sandy and never had their ducts properly cleaned should do a full inspection and cleaning once, regardless of schedule. After that, a camera inspection during your annual furnace tune-up will tell you when the next cleaning is actually needed. Call (806) 606-6902 and we will give you a straight answer based on what we see, not a calendar.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning, serving Sheepshead Bay, NY since 2013.